{"title":"Chargers","description":"","products":[{"product_id":"4-fach-lader-fur-1-5v-aa-aaa-liio-und-nimh-nicd-akkus","title":"4-Bay Charger for 1.5V AA\/AAA Li-ion and NiMH\/NiCd Batteries","description":"\u003ch1\u003e4-Bay Charger for 1.5V AA\/AAA Li-ion and NiMH\/NiCd Batteries\u003c\/h1\u003e\n\n\u003cp\u003eLatest charging technology, faster charging, higher accuracy and safety. The L4 is a 4-slot charger for 1.5V Lithium-ion batteries with and without indicator, as well as NiMH\/NiCd 1.2V AA (Mignon) and AAA (Micro)\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe L4 charges all rechargeable AA and AAA Li-ion and NiMH\/NiCd batteries, showing high compatibility with third-party brands as well (no guarantee). Supports mixed charging regardless of size (AA or AAA), model, or capacity.\u003c\/p\u003e\n\n\u003cp\u003eThe hollowed-out design, which significantly increases heat dissipation and facilitates battery removal, is unique, protects the batteries, and makes a significant contribution to safe battery handling.\u003c\/p\u003e\n\n\u003cp\u003eThe following 1.5V Lithium-ion battery types can be charged with the Xtar L4:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eXTAR 1.5V Lithium-ion batteries in AAA or AA size and most commercially available 1.5V Li-ion batteries (no guarantee)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe following NiMH \/ NiCd 1.2V battery types can be charged with the Xtar L4:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAll commercially available rechargeable NiMH \/ NiCd 1.2V batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eXtar L4 Product Information:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eFour separate charging bays, charges 1 - 4 batteries simultaneously, each charging bay charges and monitors individually and independently.\u003c\/li\u003e\n\t\u003cli\u003eMixed charging of AA\/AAA Lithium and NiMH batteries.\u003c\/li\u003e\n\t\u003cli\u003eUnique CVSA technology for NiMH batteries - more accurate full charge detection, faster and safer charging.\u003c\/li\u003e\n\t\u003cli\u003eIntelligent quick charge.\u003c\/li\u003e\n\t\u003cli\u003e0V activation function. Makes deeply discharged batteries ready for use again.\u003c\/li\u003e\n\t\u003cli\u003eLED - status indicator.\u003c\/li\u003e\n\t\u003cli\u003eUSB Type-C 2.1A \/ 5V input\u003c\/li\u003e\n\t\u003cli\u003eRevival of excessively discharged batteries.\u003c\/li\u003e\n\t\u003cli\u003eAutomatic adaptation to the optimal charging method.\u003c\/li\u003e\n\t\u003cli\u003eIntelligent adaptation of constant current and constant voltage.\u003c\/li\u003e\n\t\u003cli\u003eCharging current 4x 0.5A (with a 5V 2.1A power adapter, which is NOT included)\u003c\/li\u003e\n\t\u003cli\u003eCompact, attractive housing.\u003c\/li\u003e\n\t\u003cli\u003eAutomatic charging stop after charging is complete.\u003c\/li\u003e\n\t\u003cli\u003eMultiple protection functions, reverse polarity protection.\u003c\/li\u003e\n\t\u003cli\u003eFlame retardant ABS housing.\u003c\/li\u003e\n\t\u003cli\u003eCE, RoHS \u0026amp; FCC certified.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe power supply is via USB-C input; a power adapter is not included for environmental reasons and to save costs. Can be connected to any 5V USB port. 5V USB ports are readily available in every household alongside smartphones, USB chargers, PCs, power banks, laptops, and car USB adapters.\u003c\/p\u003e\n\n\u003cp\u003eScope of delivery: \u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eL4 charger\u003c\/li\u003e\n\t\u003cli\u003eUSB-C to USB-A cable\u003c\/li\u003e\n\t\u003cli\u003eUser manual in German, English, Italian, French, Russian, Polish, Turkish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Akkuteile Luxtrim GmbH","offers":[{"title":"Default Title","offer_id":53439399985495,"sku":"AK-500201","price":9.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/AK-500201_b1.jpg?v=1779786824"},{"product_id":"d-power-d6-nano-smart-charger-200w-8a-6s-lipo-d-power-9951","title":"D-Power D6 Nano Smart Charger, 200W, 8A, 6S Lipo, D-Power # 9951","description":"\u003ch1 style=\"text-align: center;\"\u003eD-Power D6 Nano Smart Charger, 200W, 8A, 6S Lipo, D-Power # 9951\u003c\/h1\u003e\n\n\u003cp\u003e200 watts of charging power with up to 8A charging current, powerful balancer with 500mA\/cell, up to 6 cells LiFe\/LiIon\/LiPo\/LiHV. Very compact charger with bright color display.\u003c\/p\u003e\n\n\u003cp\u003eThe new ScOS 2.0 operating system has been optimized for improved system stability and expands functionality with additional programs:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDC Power - the output can be used as a DC output, voltage and current are adjustable\u003c\/li\u003e\n\t\u003cli\u003edark mode - the display switches to dark mode for use in the dark\u003c\/li\u003e\n\t\u003cli\u003ebattery scrap - if a battery needs to be disposed of, this function can discharge it to 0V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eInput voltage: 10-30V - DC voltage\u003c\/li\u003e\n\t\u003cli\u003eMax input current: 9A\u003c\/li\u003e\n\t\u003cli\u003eOutput voltage: 1-30V\u003c\/li\u003e\n\t\u003cli\u003eCharging power: 200W (from 24V input voltage)\u003c\/li\u003e\n\t\u003cli\u003eDischarge power: 10W\u003c\/li\u003e\n\t\u003cli\u003eCharging current: 0.1-8A\u003c\/li\u003e\n\t\u003cli\u003eDischarge current: 0.1-1A\u003c\/li\u003e\n\t\u003cli\u003eBalancer current: 500mA\/cell\u003c\/li\u003e\n\t\u003cli\u003eAdjustable charge termination voltage: up to 4.35V for LiHV\u003c\/li\u003e\n\t\u003cli\u003eNumber of cells - battery type: 1-6 LiXX, 1-16 NiXX, 1-12 Pb\u003c\/li\u003e\n\t\u003cli\u003eWeight: 120 g\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 72x72x32 mm\u003c\/li\u003e\n\t\u003cli\u003eColor display: 1.5\" 240x240 IPS LCD, easy to read even in daylight and at an angle\u003c\/li\u003e\n\t\u003cli\u003eUpdatable via USB\u003c\/li\u003e\n\t\u003cli\u003eMultilingual menu guidance, also available in German\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCharger in white\u003c\/li\u003e\n\t\u003cli\u003eDisplay protection film\u003c\/li\u003e\n\t\u003cli\u003eDetailed instructions in German\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"D-Power","offers":[{"title":"Default Title","offer_id":53440143262039,"sku":"DP9951","price":25.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/DP9951_b1.jpg?v=1779982418"},{"product_id":"d-power-d608-ac-smart-charger-computer-ladegerat-200-50w-8a-bis-6s-lipo","title":"D-Power D608 AC Smart Charger, Computer Charger, 200\/50W, 8A, up to 6S Lipo","description":"\u003ch1 style=\"text-align: center;\"\u003eD-Power D608 AC Smart Charger, Computer Charger, 200\/50W, 8A, up to 6S Lipo\u003c\/h1\u003e\n\n\u003cp\u003eThe D608 from D-Power (powered by ISDT) is a compact charger with 50 or 200 watts of charging power at up to 8A charging current and a powerful balancer with 1500mA for a maximum of 6 cells LiFe\/LiIon\/LiPo\/LiHV.\u003c\/p\u003e\n\n\u003cp\u003eUsing the \"Digital Power\" program, the charger's output can be used like a power supply. Voltage and current are adjustable. Power is limited to 50W. Using the \"Destroy\" program, a battery can be completely discharged for later disposal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBright color display – very easy to read even in daylight and at a steep viewing angle\u003c\/li\u003e\n\t\u003cli\u003eBattery Scrap “Destroy” mode - if a battery is to be disposed of, it can be discharged to 0V with this function\u003c\/li\u003e\n\t\u003cli\u003eUpdatable via integrated Mini USB port\u003c\/li\u003e\n\t\u003cli\u003eMultilingual menu in German and English\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eInput voltage: 10-30V - DC voltage from external power supply\u003c\/li\u003e\n\t\u003cli\u003eInput voltage: 100-240V - AC voltage\u003c\/li\u003e\n\t\u003cli\u003eMax input current: 9A (thus 200W charging power from approx. 24V)\u003c\/li\u003e\n\t\u003cli\u003eOutput voltage: 1-30V\u003c\/li\u003e\n\t\u003cli\u003eCharging power: 50W with the included snap-in power supply and 200W with an external power supply\u003c\/li\u003e\n\t\u003cli\u003eDischarge power: 10W\u003c\/li\u003e\n\t\u003cli\u003eCharging current: 0.1-8A\u003c\/li\u003e\n\t\u003cli\u003eDischarge current: 0.1-1A\u003c\/li\u003e\n\t\u003cli\u003eBalancer current: 1500mA\/cell\u003c\/li\u003e\n\t\u003cli\u003eAdjustable charging termination voltage: up to 4.35V for LiHV\u003c\/li\u003e\n\t\u003cli\u003eCell count - Battery type: 1-6 LiXX, 1-16 NiXX, 1-12 Pb\u003c\/li\u003e\n\t\u003cli\u003eWeight: 350 g\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 110.5x110.5x31 mm\u003c\/li\u003e\n\t\u003cli\u003eColor display - easy to read even in daylight and at an oblique viewing angle\u003c\/li\u003e\n\t\u003cli\u003eSupports BattGO at the output\u003c\/li\u003e\n\t\u003cli\u003eUpdatable via integrated Mini USB port\u003c\/li\u003e\n\t\u003cli\u003eMultilingual menu also available in German\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCharger with plug-in power supply\u003c\/li\u003e\n\t\u003cli\u003eMains connection cable\u003c\/li\u003e\n\t\u003cli\u003eManual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eNo balancer board is included with the charger!\u003c\/b\u003e \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"D-Power","offers":[{"title":"Default Title","offer_id":53440143294807,"sku":"DP9952","price":41.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/DP9952_b1_b2c1c2c4-2337-466a-8115-8ee5abff75f6.jpg?v=1779788839"},{"product_id":"dual-charger-mit-2x-jr-anschluss-fur-2s-lipo-oder-liio-hacker-80009006","title":"Dual charger, with 2x JR connector, for 2S LiPo or LiIo, Hacker # 80009006","description":"\u003ch1 style=\"text-align: center;\"\u003eDual Charger, with 2x JR connector, for 2S LiPo or LiIo\u003cbr\u003e\nHacker # 80009006\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eProduct description and features:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Dual Charger JR and XH was specially developed for easy charging of Power Ion receiver batteries and Lipo batteries in models.\u003cbr\u003e\nWith the Dual Charger JR and XH, two receiver batteries can be charged simultaneously. Each battery is charged separately and automatically switches off at a charging cut-off voltage of 8.4 volts (LiPo + LiIon).\u003cbr\u003e\nPower can be supplied via a 220V power adapter from your mobile phone or via a car charging cable. Alternatively, a power bank can also be used.\u003cbr\u003e\nThe charging current per channel is max. 1.2 amperes and the charging power max. 15 watts. The aluminum housing optimally cools the charger and dissipates heat. The charger weighs only 19 grams, is discreetly small (33x36x11mm) and can be mounted in the model with four screws near the receiver batteries.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCharging cut-off voltage: 8.4 volts (LiPo + LiIon)\u003c\/li\u003e\n\t\u003cli\u003ePower: max. 15W\u003c\/li\u003e\n\t\u003cli\u003eCharging current per channel max. 1.2 amps\u003c\/li\u003e\n\t\u003cli\u003eRecommended power source\/power supply 5V - 3A\u003c\/li\u003e\n\t\u003cli\u003eQuiescent current: below 10µA (approx. 82mAh\/year)\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 33x36mmx11mm (14.4mm incl. USB-C)\u003c\/li\u003e\n\t\u003cli\u003eWeight: 19\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1x Dual Charger JR\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hacker Motor GmbH","offers":[{"title":"Default Title","offer_id":53441194066263,"sku":"H80009006","price":58.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/H80009006_b1_4e8d9282-2fb5-49ce-bb78-a7bfd9c104cd.jpg?v=1779797000"},{"product_id":"dual-charger-mit-2x-xh-anschluss-fur-2s-lipo-oder-liio-hacker-80009007","title":"Dual Charger, with 2x XH connector, for 2S LiPo or LiIo, Hacker # 80009007","description":"\u003ch1 style=\"text-align: center;\"\u003eDual Charger, with 2x XH connector, for 2S LiPo or LiIo, Hacker # 80009007\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eProduct Description and Features:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Dual Charger JR and XH was specially developed for easy charging of Power Ion receiver batteries and LiPo batteries in models.\u003cbr\u003e\nWith the Dual Charger JR and XH, two receiver batteries can be charged simultaneously. Each battery is charged separately and switches off automatically at a final charge voltage of 8.4 volts (LiPo + LiIon).\u003cbr\u003e\nThe power supply can be provided via a 220V power adapter from your mobile phone or via a car charging cable. Alternatively, a power bank can also be used.\u003cbr\u003e\nThe charging current per channel is max. 1.2 amps and the charging power max. 15 watts. The aluminum housing optimally cools the charger and dissipates heat. The charger weighs only 19 grams, is discreetly small (33x36x11mm) and can be secured with four screws near the receiver batteries in the model.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eFinal charge voltage: 8.4 Volts (LiPo + LiIon)\u003c\/li\u003e\n\t\u003cli\u003ePower: max. 15W\u003c\/li\u003e\n\t\u003cli\u003eCharging current per channel max. 1.2 Amps\u003c\/li\u003e\n\t\u003cli\u003eRecommended power source\/power adapter 5V - 3A\u003c\/li\u003e\n\t\u003cli\u003eQuiescent current: under 10µA (approx. 82mAh\/year)\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 33x36mmx11mm (14.4mm incl. USB-C)\u003c\/li\u003e\n\t\u003cli\u003eWeight: 19\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of Delivery\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1x Dual Charger XH\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hacker Motor GmbH","offers":[{"title":"Default Title","offer_id":53441194688855,"sku":"H80009007","price":58.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/H80009007_b1_56982d46-d0b2-4c22-ac73-691c58df22c7.jpg?v=1779797016"},{"product_id":"e-flite-usb-lader-fur-1s-lipo-akku-4-2v-300ma-e-lite-eflc1008","title":"E-flite USB Charger for 1S LiPo Battery, 4.2V\/300mA, E-lite # EFLC1008","description":"\u003cp\u003e \u003ca href=\"Elektroaltgeraeteentsorgung.htm?shop=hoellein\u0026amp;SessionId=\u0026amp;a=catalog\u0026amp;t=1084\u0026amp;c=1084\u0026amp;p=1084\" rel=\"nofollow\"\u003e\u003c\/a\u003e \u003c\/p\u003e","brand":"e-flite","offers":[{"title":"Default Title","offer_id":53441680539991,"sku":"HHEFLC1008","price":10.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/HHEFLC1008_b1_41eb3958-afc4-4ab8-b6ce-de6f2358122d.jpg?v=1779798513"},{"product_id":"top-ladegerat-bq-cc65-mit-lcd-display-ohne-akkus-fur-1-4-aa-zellen-142622","title":"Premium Charger BQ-CC65, with LCD display, WITHOUT batteries, for 1-4 AA cells, # 142622","description":"\u003ch1 style=\"text-align: center;\"\u003eTop Charger BQ-CC65, WITHOUT Batteries, with LCD Display, for 1 - 4 AA and AAA Cells\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eProduct Features:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCharges 1-4 AA or 1-4 AAA rechargeable batteries\u003c\/li\u003e\n\t\u003cli\u003eDisplays battery charge level on LCD display\u003c\/li\u003e\n\t\u003cli\u003eDisplays power, voltage, time, and watt-hours (Wh)\u003c\/li\u003e\n\t\u003cli\u003eFeatures refresh mode (discharge mode)\u003c\/li\u003e\n\t\u003cli\u003eCharges mobile devices via USB port\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eRechargeable batteries: 1-4 AAA units\u003c\/li\u003e\n\t\u003cli\u003eRechargeable batteries: 1-4 AA units\u003c\/li\u003e\n\t\u003cli\u003ePower supply: 100 - 240 Volts\u003c\/li\u003e\n\t\u003cli\u003eType: Plug-in charger\u003c\/li\u003e\n\t\u003cli\u003eControl\/Functions:\u003cbr\u003e\n\tBattery defect detection\u003cbr\u003e\n\tAutomatic refresh function\u003cbr\u003e\n\tIndividual slot monitoring\u003cbr\u003e\n\tQuick capacity test\u003cbr\u003e\n\tLED charging indicator\u003cbr\u003e\n\tOvercharge protection\/trickle charging LCD display\u003c\/li\u003e\n\t\u003cli\u003eConfiguration: unequipped (WITHOUT BATTERIES) \u003c\/li\u003e\n\t\u003cli\u003eCharging technology: Processor-controlled\u003c\/li\u003e\n\t\u003cli\u003eWeight: 353 g\u003c\/li\u003e\n\t\u003cli\u003eLength: 225 mm\u003c\/li\u003e\n\t\u003cli\u003eWidth: 128 mm\u003c\/li\u003e\n\t\u003cli\u003eHeight: 93 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HÜCKMANN","offers":[{"title":"Default Title","offer_id":53441781006679,"sku":"HN142622","price":50.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/HN142622_b1.jpg?v=1779799142"},{"product_id":"usb-ladegerat-bq-cc61-inkl-4x-aa-akkus-eneloop-1900mah-142775","title":"USB charger BQ-CC61 incl. 4x AA rechargeable batteries (Eneloop 1900mAh), # 142775","description":"\u003ch1 style=\"text-align: center;\"\u003eUSB Charger BQ-CC61 incl. 4x AA Rechargeable Batteries (Eneloop 1900mAh)\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCharges 2 or 4x AA \/ AAA rechargeable batteries\u003c\/li\u003e\n\t\u003cli\u003ePower supply via USB port\u003c\/li\u003e\n\t\u003cli\u003e2 LED indicators\u003c\/li\u003e\n\t\u003cli\u003eLight and compact\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eRechargeable batteries: 2 or 4 x AA \/ AAA\u003c\/li\u003e\n\t\u003cli\u003ePower supply: USB (5 volts)\u003c\/li\u003e\n\t\u003cli\u003eFunctions: LED charging indicator\u003c\/li\u003e\n\t\u003cli\u003eIncluded: 4 x AA Eneloop 1900 mAh\u003c\/li\u003e\n\t\u003cli\u003eCharging time: 10 h\u003c\/li\u003e\n\t\u003cli\u003eLength: 200 mm\u003c\/li\u003e\n\t\u003cli\u003eWidth: 105 mm\u003c\/li\u003e\n\t\u003cli\u003eHeight: 72 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HÜCKMANN","offers":[{"title":"Default Title","offer_id":53441783398743,"sku":"HN142775","price":21.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/HN142775_b1_7d673442-e2e0-4f22-b4b6-f729ed56646d.jpg?v=1779799170"},{"product_id":"eneloop-smart-charger-bq-cc17-incl-4x-aa-eneloop-148211","title":"eneloop Smart Charger BQ-CC17, incl. 4x AA-Eneloop, # 148211","description":"\u003ch1 style=\"text-align: center;\"\u003eeneloop Smart Charger BQ-CC17, incl. 4x AA-Eneloop, # 148211\u003c\/h1\u003e\n\n\u003cp\u003eThe advanced BQ-CC17 charger is the ideal complement for ready-to-use eneloop batteries!\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery: incl. 4x eneloop AA rechargeable batteries \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCharging time: AA (2000mAh) ± 7 hrs. \/ AAA (800mAh) ± 6 hrs.\u003c\/li\u003e\n\t\u003cli\u003ecan charge 1, 2, 3 or 4 batteries\u003c\/li\u003e\n\t\u003cli\u003eindividual battery charging control (Delta V)\u003c\/li\u003e\n\t\u003cli\u003e4 LEDs indicate charging status\u003c\/li\u003e\n\t\u003cli\u003eworldwide use (100-240V \/ 50-60Hz)\u003c\/li\u003e\n\t\u003cli\u003epermanently integrated plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eRechargeable batteries (standard chargers): 1-4 x AAA\u003c\/li\u003e\n\t\u003cli\u003eRechargeable batteries (standard chargers): 1-4 x AA\u003c\/li\u003e\n\t\u003cli\u003ePower supply: 100 - 240 Volts\u003c\/li\u003e\n\t\u003cli\u003eModel:Plug-in charger\u003c\/li\u003e\n\t\u003cli\u003eCharging time: approx. 7 h\u003c\/li\u003e\n\t\u003cli\u003eCharging time: approx. 6 h\u003c\/li\u003e\n\t\u003cli\u003eOutput voltage: 1.5 V\u003c\/li\u003e\n\t\u003cli\u003eFeatures: -deltaU cut-off\u003c\/li\u003e\n\t\u003cli\u003eSafety timer\u003c\/li\u003e\n\t\u003cli\u003eChargable systems: Ni-MH\u003c\/li\u003e\n\t\u003cli\u003eCharging current:150 mA\u003c\/li\u003e\n\t\u003cli\u003eCharging current:300 mA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HÜCKMANN","offers":[{"title":"Default Title","offer_id":53441784643927,"sku":"HN148211","price":33.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/HN148211_b1.jpg?v=1779799183"},{"product_id":"ladegerat-rdx-2-pro-duo-12-230v-1-6s-2x-130w-multiplex-1-02403","title":"Charger RDX 2 Pro Duo, 12 \/ 230V, 1-6S, 2x 130W, Multiplex # 1-02403","description":"\u003ch1 style=\"text-align: center;\"\u003eCharger RDX 2 Pro Duo, 12 \/ 230V, 1-6S, 2x 130W\u003cbr\u003e\nMultiplex # 1-02403\u003c\/h1\u003e\n\n\u003cp\u003eThe RDX2 Pro features independent circuits, allowing you to charge two batteries simultaneously, even if the battery types or capacities differ. In addition, the RDX2 Pro offers an integrated balancer for Lithium-Polymer (LiPo), Lithium-Ferrite (LiFe), and Lithium-Ion (Li-Ion) batteries (up to six cells), as well as the newly released Lithium-Polymer (LiHV) batteries.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eRDX2 Pro charger\u003c\/li\u003e\n\t\u003cli\u003eDC (direct current) cable with crocodile clips\u003c\/li\u003e\n\t\u003cli\u003ePower cable\u003c\/li\u003e\n\t\u003cli\u003e2 pieces XT60–MG6 (MPX) connector adapters\u003c\/li\u003e\n\t\u003cli\u003e2 pieces universal balance board incl. cable\u003c\/li\u003e\n\t\u003cli\u003eXT60 receiver battery adapter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445558927703,"sku":"M1-02403","price":138.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M1-02403_b1_05b41ac3-9c18-46df-bb42-c956b6be168a.jpg?v=1779901484"},{"product_id":"hitec-multicharger-x1-nano-220v-50w-multiplex-114132","title":"HITEC Multicharger X1 NANO, 220V, 50W, Multiplex # 114132","description":"\u003ch1 style=\"text-align: center;\"\u003eHITEC Multicharger X1 NANO, 220V, 50W, Multiplex # 114132\u003c\/h1\u003e\n\n\u003cp\u003eHiTEC X1 Nano is the affordable quick charger for all hobbyists. Connect the power cable to a 230 volt socket and you can easily charge all common battery types. This compact charging station with a charging power of 50 watts is super easy to use.\u003cbr\u003e\nDetermine your battery type and with a long press of a button, select the charging current (1, 2, 3 or 4 amperes). The HiTEC X1 Nano automatically detects the cell count of the battery. The LED display shows the charging status of your battery. The X1 Nano is child's play to operate.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCharger\u003c\/li\u003e\n\t\u003cli\u003e1x charging cable Multiplex M6\u003c\/li\u003e\n\t\u003cli\u003eBalancer adapter cable XH to EH 2\/3\/4S\u003c\/li\u003e\n\t\u003cli\u003eGerman\/English\/French operating instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HITECH RC","offers":[{"title":"Default Title","offer_id":53445587009879,"sku":"M114132","price":29.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M114132_b1.jpg?v=1779803622"},{"product_id":"usb-steckerladegerat-multiplex-100-240v-5-0v-dc-1-5a-zu-cockpit-sx-145534","title":"USB Mains Charger Multiplex 100-240V, 5.0V DC\/1.5A, for Cockpit SX, # 145534","description":"\u003cp\u003e \u003ca href=\"Elektroaltgeraeteentsorgung.htm?shop=hoellein\u0026amp;SessionId=\u0026amp;a=catalog\u0026amp;t=1084\u0026amp;c=1084\u0026amp;p=1084\" rel=\"nofollow\"\u003e\u003c\/a\u003e \u003c\/p\u003e","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445592252759,"sku":"M145534","price":11.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M145534_b1.jpg?v=1780490039"},{"product_id":"multicharger-l-703-equ-110-240v-multiplex-82523","title":"MULTIcharger L-703 EQU (110-240V), Multiplex # 82523","description":"\u003ch1\u003eMULTIcharger L-703 EQU (110-240V), Multiplex # 82523\u003c\/h1\u003e\n\n\u003cp\u003eInexpensive 240 Volt mains charger for charging a 2S (7.4V) or 3S (11.1V) LiPo battery with automatic charging and integrated balancer connection.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eLED charging indicator.\u003c\/li\u003e\n\t\u003cli\u003eCharging current max. 1.2 A.\u003c\/li\u003e\n\t\u003cli\u003e2 charging outputs for 2S (7.4V) or 3S (11.1V) LiPo battery\u003c\/li\u003e\n\t\u003cli\u003eAutomatic voltage detection from 110 - 240 Volt\u003c\/li\u003e\n\t\u003cli\u003eAdapter charging cable\u003c\/li\u003e\n\t\u003cli\u003e240 Volt Euro plug\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445647565143,"sku":"M82523","price":23.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M82523_b1.jpg?v=1779805304"},{"product_id":"usb-ladekabel-mit-molex-anschluss-pichler-c8685","title":"USB charging cable -\u003e with MOLEX connector, Pichler # C8685","description":"\u003ch1 style=\"text-align: center;\"\u003eUSB Charging Cable -\u003e with MOLEX Connector\u003cbr\u003e\nPichler # C8685\u003c\/h1\u003e\n\n\u003cp\u003eUSB charging cable for 1-cell LiPo batteries (3.7V) with the popular Molex 51005 connector.\u003c\/p\u003e\n\n\u003cp\u003eIdeal for the flight battery of the Pichler Crystal Drone, many WALKERA models, etc.\u003c\/p\u003e","brand":"PICHLER Modellbau GmbH","offers":[{"title":"Default Title","offer_id":53446000247127,"sku":"PIC8685","price":5.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/PIC8685_b1.jpg?v=1779929354"},{"product_id":"isdt-smart-charger-608ac-200-50w-8a-bis-6s-lipo","title":"iSDT SMART CHARGER 608AC, 200\/50W, 8A, up to 6S Lipo","description":"\u003ch1 style=\"text-align: center;\"\u003eiSDT SMART CHARGER 608AC, 200\/50W, 8A, up to 6S Lipo\u003c\/h1\u003e\n\n\u003cp\u003eThe iSDT Smart Charger 608AC shines with 50\/200 watts of charging power, up to 8A charging current, a powerful \u003cb\u003e1500mA \u003c\/b\u003ebalancer, and the ability to charge\/discharge \u003cb\u003eup to 6 cells LiFe\/LiIon\/LiPo\/LiHV\u003c\/b\u003e. Additionally, it naturally supports BattGO at the charging output. The compact charger delights with its bright color display.\u003cbr\u003e\nNew to iSDT is the \"Digital Power\" program, which allows the charger's output to be used like a power supply. Voltage and current are adjustable, and the power is limited to 50 watts. The \"Destroy\" program has also been added. This allows a battery to be completely discharged for disposal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eInput voltage: 10-30V - DC voltage from external power supply\u003c\/li\u003e\n\t\u003cli\u003eInput voltage: 100-240V - AC voltage\u003c\/li\u003e\n\t\u003cli\u003eMax input current: 9A (thus 200W charging power from approx. 24V)\u003c\/li\u003e\n\t\u003cli\u003eOutput voltage: 1-30V\u003c\/li\u003e\n\t\u003cli\u003eCharging power: 50W with the included snap-in power supply and 200W with an external power supply\u003c\/li\u003e\n\t\u003cli\u003eDischarge power: 10W\u003c\/li\u003e\n\t\u003cli\u003eCharging current: 0.1-8A\u003c\/li\u003e\n\t\u003cli\u003eDischarge current: 0.1-1A\u003c\/li\u003e\n\t\u003cli\u003eBalancer current: 1500mA\/cell\u003c\/li\u003e\n\t\u003cli\u003eAdjustable charge termination voltage: up to 4.35V for LiHV\u003c\/li\u003e\n\t\u003cli\u003eCell count - Battery type: 1-6 LiXX, 1-16 NiXX, 1-12 Pb\u003c\/li\u003e\n\t\u003cli\u003eWeight: 350 g\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 110.5x110.5x31 mm\u003c\/li\u003e\n\t\u003cli\u003eColor display - easily readable even in daylight and at oblique viewing angles\u003c\/li\u003e\n\t\u003cli\u003eSupports BattGO at the output\u003c\/li\u003e\n\t\u003cli\u003eUpdatable via integrated Mini USB port\u003c\/li\u003e\n\t\u003cli\u003eMultilingual menu navigation, including German\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCharger with plug-in power supply\u003c\/li\u003e\n\t\u003cli\u003eMains connection cable\u003c\/li\u003e\n\t\u003cli\u003eManual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eNo balancer board is included with the charger!\u003c\/b\u003e\u003c\/p\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53446251413847,"sku":"RC-608AC","price":58.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-608AC_b1.jpg?v=1779813802"},{"product_id":"isdt-608pd-ladegerat-1-6-lixx-10a-max-240w-5-30v","title":"ISDT 608PD Charger, 1 - 6 LiXX, 10A - max. 240W, 5 - 30V","description":"\u003ch1 style=\"text-align: center;\"\u003eISDT 608PD Charger, 1 - 6 LiXX\u003cbr\u003e\n10A - max. 240W, 5 - 30V\u003c\/h1\u003e\n\n\u003cp\u003eThe new iSDT 608PD is an extremely compact charger with impressive capabilities.\u003cbr\u003e\nA conventional DC power source such as a battery or a power supply with a voltage of 5-30V (240W max.) can be used as power supply, or a USB-C charger (140W max. PD 3.1).\u003c\/p\u003e\n\n\u003cp\u003eThe USB-C port is bidirectional, meaning it can be used as an input for power supply with up to 140W, but also for charging smartphones etc. with max. 100W if a battery is connected to the output. This means that if a flight battery is still full after flying, the energy can be used to charge a smartphone or tablet via USB-C.\u003c\/p\u003e\n\n\u003cp\u003eThe iSDT 608PD cannot discharge, but only shift energy as described above.\u003c\/p\u003e\n\n\u003cp\u003e1-6s LiXx can be charged with up to 10A. The intelligent fan control and the compact design enable this performance.\u003c\/p\u003e\n\n\u003cp\u003eOperation can be done via the 3 buttons, but it is much more convenient via the iSD Link app on your smartphone. Here, the iSDT 608PD is simply paired (in the app, press the + button at the top right when the 608PD is switched on, select the device, then briefly disconnect and reconnect the power supply, and the device is connected). All parameters can be set and the individual options selected in this way.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eHere is an example of the performance using a 3s 2000mA and 6s 5000mA LiPos:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eMax. charging current with DC source at 240W =\u003e 3s2000mA up to 10A, 6s 5000mA up to 9.5A\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003eMax. charging current with USB-C PD at 140W =\u003e 3s2000mA up to 10A, 6s 5000mA up to 5.5A\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e• Maximum input current: DC 10A, USB-C 5A\u003cbr\u003e\n• Input voltage: DC 5-30V, USB-C 5-28V\u003cbr\u003e\n• Output voltage: DC 3.0~30V\u003cbr\u003e\n• Charging current: 0.5~10.0A\u003cbr\u003e\n• Maximum charging power: 240W\/10A (DC), 140W\/5A (USB-C PD 3.1)\u003cbr\u003e\n• Maximum discharge power: USB-C 100W\/5A ONLY Bidirectional from input to output possible, see description!\u003cbr\u003e\n• Supported battery type and series: LiFe, LiPo, LiHv(4.35V~4.50V)1-6S\/Pb 1-12S\/NiMH 1-16S\u003cbr\u003e\n• Balancer current: 0.8A\/Cell Max\u003cbr\u003e\n• Operating temperature: 0~40°C Storage temperature: -20~60°C\u003cbr\u003e\n• Abnormal battery voltage alarm: Support\u003cbr\u003e\n• Cell count setting error alarm: Support\u003cbr\u003e\n• Dimensions: 72.5×60×26.6mm\u003cbr\u003e\n• Weight: 85g(±10%)\u003c\/p\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53446251544919,"sku":"RC-608PD","price":31.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-608PD_b1_fd11795b-8145-4f7e-9340-da7c57304fb1.jpg?v=1779929798"},{"product_id":"isdt-air-8-ladegerat-1-8s-500w-20a","title":"ISDT Air 8 Charger, 1 - 8S, 500W, 20A","description":"\u003ch1 style=\"text-align: center;\"\u003eISDT Air 8 Charger, 1 - 8S, 500W, 20A\u003c\/h1\u003e\n\n\u003cp\u003eThe new Air8 charger from iSDT is the successor to the Q8 and offers 500W charging power with a weight of only 169 grams and almost tiny dimensions of 80x80x34 mm. It can charge 1-8s LiPo or LiHv batteries with a maximum of 20A. The new scOS 2.0 offers improved system stability and new functions such as Dark Mode (will be delivered later via update), a DC Power Mode and a mode to bring defective batteries to 0V.\u003c\/p\u003e\n\n\u003cp\u003eThe Air 8 supports the Batt Air function; the necessary Batt Air Plugs are sold separately!\u003c\/p\u003e\n\n\u003cp\u003eThe IPS display ensures very good readability even in sunlight.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eInput voltage: 10-34V - DC voltage\u003c\/li\u003e\n\t\u003cli\u003eMax input current: 20A\u003c\/li\u003e\n\t\u003cli\u003eOutput voltage: 1-34V\u003c\/li\u003e\n\t\u003cli\u003eCharging power: 500W (from 27V input voltage)\u003c\/li\u003e\n\t\u003cli\u003eDischarge power: 15W\u003c\/li\u003e\n\t\u003cli\u003eCharging current: 0.1-20A\u003c\/li\u003e\n\t\u003cli\u003eDischarge current: 0.1-1.5A\u003c\/li\u003e\n\t\u003cli\u003eBalancer current: 1500mA\/cell\u003c\/li\u003e\n\t\u003cli\u003eAdjustable charge termination voltage: up to 4.35V for LiHV\u003c\/li\u003e\n\t\u003cli\u003eCell count - battery type: 1-8 LiXX, 1-8 LiHV \u0026amp; ULiHv 1-16 NiXX, 1-12 Pb\u003c\/li\u003e\n\t\u003cli\u003eWeight: 169 g\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 80x80x34mm\u003c\/li\u003e\n\t\u003cli\u003eColor display: 2.4\" IPS LCD, easy to read even in daylight and at an oblique viewing angle of up to 178°\u003c\/li\u003e\n\t\u003cli\u003eUpgradable via USB\u003c\/li\u003e\n\t\u003cli\u003eMulti-language menu navigation, German can be selected.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eManual\u003c\/li\u003e\n\t\u003cli\u003eDisplay film\u003c\/li\u003e\n\t\u003cli\u003eiSDT sticker\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53446255378775,"sku":"RC-AIR8","price":60.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-AIR8_b1_105dbd3b-2a7c-49f3-8a31-2d69a820ab64.jpg?v=1779907012"},{"product_id":"isdt-smart-charger-sc-d1-ac-dc-lader-100w-ac-250w-dc-max-6s","title":"ISDT SMART CHARGER SC-D1, AC\/DC charger, 100W AC \/ 250W DC, max. 6S","description":"\u003ch1 style=\"text-align: center;\"\u003eISDT SMART-CHARGER SC-D1, AC\/DC Charger, 100W AC \/ 250W DC, max. 6S\u003c\/h1\u003e\n\n\u003cp\u003eThe ISDT D1 charger is extremely flexible and powerful. It can be powered by 10-30V DC when on the go, or directly from the 230V mains via the integrated 100W power supply. With an external power supply, the ISDT D1 delivers an impressive max. 250W. At 220 volts, it still delivers 100W.\u003c\/p\u003e\n\n\u003cp\u003eUp to 6 lithium cells can be charged with up to 10A. Thanks to the integrated USB-C port, simple system updates are possible at any time.\u003c\/p\u003e\n\n\u003cp\u003eThe current operating system of the D1 offers not only the \"Dark Mode\" but also the \"Destruction Mode\", where defective cells can be discharged down to 0V for disposal.\u003cbr\u003e\nThe integrated balancer delivers up to 1.5A per cell. During discharge, a maximum of 15W is available.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eThe charger does not include a balancer board!\u003c\/b\u003e\u003c\/p\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53446259376471,"sku":"RC-D1","price":83.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-D1_b1.jpg?v=1779814246"},{"product_id":"junsi-icharger-4512-duo-1-12-lipo-ladeleistung-2x2000-watt","title":"JUNSI iCharger 4512 DUO, 1-12 LiPo, 2x2000 Watt charging power","description":"\u003ch1 style=\"text-align: center;\"\u003eJUNSI iCharger 4512 DUO, 1-12 LiPo\u003cbr\u003e\nCharging power 2x2000 Watt\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eAll Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! AGM batteries may not be charged in the PB program!\u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eWith the new iCharger 4512DUO, the renowned manufacturer Junsi has technically completely renewed the well-known 4010DUO charger.\u003c\/p\u003e\n\n\u003cp\u003eThe new 4512DUO charger combines the advantages of the well-known Junsi iCharger 4010DUO with the latest technology, thus offering significantly more power and new functions.\u003cbr\u003e\nThe two charging outputs are equipped with high-current XT90 connectors to ensure continuous power transmission.\u003c\/p\u003e\n\n\u003cp\u003eThe technical data is impressive: 2800W charging power (from \u003e40V), 1-12s LiXx cells and up to 45 amps of charging current are sufficient even for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can also be charged.\u003c\/p\u003e\n\n\u003cp\u003eThe discharge power is 200 watts total (130W per output if only one output is used), but can be increased to up to 2800W by means of an external load (discharge resistor). Of course, the iCharger 4512DUO also supports regenerative charging. Here, the battery capacity of, for example, a full flight battery is fed back into the supply battery.\u003c\/p\u003e\n\n\u003cp\u003eThe balancer current of 4 amps total (2A per output) always ensures perfectly matched cell voltages.\u003c\/p\u003e\n\n\u003cp\u003eA USB-C PD port for charging smartphones etc (5V\/3A, 9V\/2A, 12V\/1.5A) or for software updates is also installed. The Micro SD slot can be used for logging data, but also for future updates.\u003c\/p\u003e\n\n\u003cp\u003eA new feature is \"Digital Power\", where one output can be used as a stabilized power supply. The output voltage can be set from 2V to 50V, the current from 1A-45A (Please note that an appropriate power supply must be provided for this!)\u003c\/p\u003e\n\n\u003cp\u003eA servo tester is also integrated, but please note that an external power supply is necessary for this!\u003c\/p\u003e\n\n\u003cp\u003eThe menu navigation is almost identical to the well-known Junsi iCharger 3XXDUO, 45X DUO or 4010DUO.\u003c\/p\u003e\n\n\u003cp\u003eA 2.8\" IPS LCD display ensures good readability even in low light conditions.\u003c\/p\u003e\n\n\u003cp\u003eInstructions in English are included with the charger in the form of a CD; the German version can be downloaded from our website.\u003c\/p\u003e\n\n\u003cp\u003eAll Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! AGM batteries may not be charged in the PB program!\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cb\u003eATTENTION! To charge 12s, a 13-pin XH connector strip on the battery is required! NO balancer board is included for charging, e.g., 2x6s as 12s! (CB-12XH\/EH)\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFor 10s as 2x 5s, the well-known CB-1010 with the 11-11 Wire can be used!\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003e* Charging a 12S battery with 2 balancer plugs *\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003eYou will need a board with a connection cable suitable for the battery and the charger. Then strictly observe the following order:\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003e- First connect the charger to the power supply or a supply battery. If you are using a power supply, turn it on first.\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003eCaution! Only connect the batteries to the charger when they are correctly connected to the balancer board!\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003e- First insert the first balancer plug of cells 1 - 6 \"battery negative side, black cable\" into the matching 6S slot of the board from the negative side,\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003e- then insert the second balancer plug of cells 6–12 into the second 6S slot from the positive side \"battery positive side, red cable\". Now connect it to the charger. If it hasn't sparked and smoked by then, you've done everything correctly!\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003e- Only now connect the thick red main charging cable \"+\" of the battery to the charger, then the thick black main charging cable \"-\".\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eConnections: Avoid short circuits, otherwise there is a risk of injury! This described sequence also applies when charging several batteries in series!\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003eYou are responsible for any damage and defects that may arise from non-observance!\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\nScope of delivery:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e2x XT90 socket, EC8 cable for self-assembly (mating connector for charger)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JUNSI Electronic","offers":[{"title":"Default Title","offer_id":53446259900759,"sku":"RC-iCharger4512DUO","price":411.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-iCharger4512DUO_b1_2656f436-59e6-40a3-b4d1-cbef2455e7ac.jpg?v=1779907276"},{"product_id":"junsi-icharger-456-duo-2x6s-2x-1400w-max-70a-ladestrom","title":"Junsi iCharger 456 Duo, 2x6S, 2x 1400W, max 70A charging current","description":"\u003ch1 style=\"text-align: center;\"\u003eJunsi iCharger 456 Duo, 2x6S, 2x 1400W\u003cbr\u003e\nmax 70A charging current\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eAll Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! AGM batteries may not be charged with the PB program! \u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eWith the new iCharger 456DUO, the renowned manufacturer Junsi has technically completely updated the well-known 406DUO charger.\u003c\/p\u003e\n\n\u003cp\u003eThe new 456DUO charger combines the advantages of the well-known Junsi iCharger 406DUO with the latest technology and thus significantly more power and new functions.\u003cbr\u003e\nThe two charging outputs are equipped with high-current XT90 connectors to ensure continuous power transmission.\u003c\/p\u003e\n\n\u003cp\u003eA USB-C PD port for charging smartphones etc. (5V\/3A, 9V\/2A, 12V\/1.5A) or for software updates is also installed. The Micro SD slot can be used for logging data, but also for future updates.\u003c\/p\u003e\n\n\u003cp\u003eA new feature is the \"Digital Power\" function, where one output can be used as a stabilized power supply. The output voltage can be set from 2V to 32V, the current from 1A-45A (Please note that an appropriate power supply must be provided for this!)\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eLatest Synchronous Buck-Boost Technology for maximum power up to 2200W, for 1-6s LiXx\u003c\/li\u003e\n\t\u003cli\u003eDUO charger with 2 equivalent charging outputs each with max. 1400W \/ total 2200W, 10-49V input voltage\u003c\/li\u003e\n\t\u003cli\u003eUSB-C Port with PD (Power Delivery) for charging current smartphones etc. 5V\/3A, 9V\/2A, 12V\/1.5A\u003c\/li\u003e\n\t\u003cli\u003eMicro SD slot for data logging \/\/ Integrated servo tester \/\/ Channel 1 can be used as a power supply 2V-32V, 1A-45A\u003c\/li\u003e\n\t\u003cli\u003eTotal 4A balancer current (2A per output) discharge power 140W total, 80W per channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAll Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! AGM batteries may not be charged with the PB program!\u003c\/p\u003e","brand":"JUNSI Electronic","offers":[{"title":"Default Title","offer_id":53446259999063,"sku":"RC-iCharger456Duo","price":336.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-iCharger456Duo_b1.jpg?v=1779814284"},{"product_id":"junsi-icharger-458-duo-2x8s-2x-1600w-max-70a-ladestrom","title":"Junsi iCharger 458 Duo, 2x8S, 2x 1600W, max 70A charging current","description":"\u003ch1 style=\"text-align: center;\"\u003eJunsi iCharger 458 Duo, 2x8S, 2x 1600W\u003cbr\u003e\nmax 70A charging current\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eAll Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! AGM batteries may not be charged in the PB program! \u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eWith the new iCharger 458DUO, the renowned manufacturer Junsi has completely renewed the technology of the well-known 308DUO charger.\u003c\/p\u003e\n\n\u003cp\u003eThe new 458DUO charger combines the advantages of the well-known Junsi iCharger 308DUO with the latest technology, resulting in significantly more power and new functions.\u003cbr\u003e\nBoth charging outputs are equipped with high-current XT90 connectors to ensure continuous power transmission.\u003c\/p\u003e\n\n\u003cp\u003eA USB-C PD port for charging smartphones etc. (5V\/3A, 9V\/2A, 12V\/1.5A) or for software updates is also installed. The Micro SD slot can be used for data logging, but also for future updates.\u003c\/p\u003e\n\n\u003cp\u003eA new feature is \"Digital Power,\" which allows one output to be used as a stabilized power supply. The output voltage can be set from 2V to 32V, and the current from 1A-45A (Please note that an appropriate power supply must be provided for this!)\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eLatest Synchronous Buck-Boost Technology for maximum power up to 2200W, for 1-8s LiXx\u003c\/li\u003e\n\t\u003cli\u003eDUO charger with 2 equivalent charging outputs, each with max. 1600W \/ total 2200W, 10-49V input voltage\u003c\/li\u003e\n\t\u003cli\u003eUSB-C Port with PD (Power Delivery) for charging current smartphones etc. 5V\/3A, 9V\/2A, 12V\/1.5A\u003c\/li\u003e\n\t\u003cli\u003eMicro SD slot for data log \/\/ Integrated servo tester \/\/ Channel 1 can be used as power supply 2V-32V, 1A-45A\u003c\/li\u003e\n\t\u003cli\u003eTotal 4A balancer current (2A per output) discharge power 140W total, 80W per channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAll Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! AGM batteries may not be charged in the PB program!\u003c\/p\u003e","brand":"JUNSI Electronic","offers":[{"title":"Default Title","offer_id":53446260162903,"sku":"RC-iCharger458Duo","price":352.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-iCharger458Duo_b1.jpg?v=1779814303"},{"product_id":"junsi-icharger-dx12-12s-lipo-2x-1200w-oder-1x-1800w","title":"Junsi iCharger DX12 - 12S LiPo, 2x 1200W or 1x 1800W","description":"\u003ch1 style=\"text-align: center;\"\u003eJunsi iCharger DX12 - 12S LiPo, 2x 1200W\u003cbr\u003e\nor 1x 1800W\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eAll Junsi chargers of the X and DUO series are designed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! AGM batteries may not be charged in the PB program! \u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eWith the new iCharger DX12, the renowned manufacturer Junsi has launched a DUO charger in a compact format.\u003c\/p\u003e\n\n\u003cp\u003eThe new DX12 charger combines the advantages of the well-known Junsi iCharger DUO series with the portability of a small pocket charger. Despite the small dimensions of 111.5 x 128.5 x 40 mm, no compromises were made in terms of performance and usability. The newly developed rotary wheel has a very good pressure point and makes operation enormously easier.\u003c\/p\u003e\n\n\u003cp\u003eThe technical data are impressive: 1700W charging power (from \u003e25V), 1-12s LiXx cells and up to 30 amps charging current are sufficient even for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can also be charged.\u003c\/p\u003e\n\n\u003cp\u003eThe discharge power is 80 watts total (50W per output if only one output is used), but can be increased to up to 3000W by means of an external load (discharge resistor). Of course, the iCharger DX12 also supports regenerative charging. Here, the battery capacity of, for example, a full flight battery is fed back into the supply battery.\u003c\/p\u003e\n\n\u003cp\u003eThe balancer current of 4 amps total (2A per output) always ensures perfectly matched cell voltages.\u003c\/p\u003e\n\n\u003cp\u003eA USB-C PD port for charging smartphones etc. (5V\/3A, 9V\/2A, 12V\/1.5A) or for software updates is also installed. The Micro SD slot can be used for logging data, but also for future updates.\u003c\/p\u003e\n\n\u003cp\u003eA servo tester is also integrated; please note that an external power supply is required here!\u003c\/p\u003e\n\n\u003cp\u003eThe menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.\u003c\/p\u003e\n\n\u003cp\u003eA 2.8\" IPS LCD display ensures good readability even in low light.\u003c\/p\u003e\n\n\u003cp\u003eInstructions in English are included with the charger on a CD, the German version can be downloaded from our website.\u003c\/p\u003e\n\n\u003cp\u003eAll Junsi chargers of the X and DUO series are designed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! AGM batteries may not be charged in the PB program!\u003c\/p\u003e\n\n\u003cp\u003eATTENTION! To charge 12s, a 13-pin XH connector strip on the battery is required! NO balancer board is included to charge, for example, 2x6s as 12s! (CB-12XH\/EH)\u003c\/p\u003e\n\n\u003cp\u003eFor 10s as 2x 5s, the well-known CB-1010 with the 11-11 Wire can be used!\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003e* Charging a 12S battery with 2 balancer plugs *\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003eYou will need a board with a connection cable suitable for the battery and the charger. Then be sure to observe the following sequence:\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003e- First, connect the charger to the power supply or a supply battery. If you are using a power supply, switch it on first.\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003eBe careful! Only connect the batteries to the charger after they have been correctly connected to the balancer board!\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003e- First, plug the first balancer plug of cells 1 - 6 \"battery negative side, black cable\" into the appropriate 6S slot of the board from the negative side,\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003e- then plug the second balancer plug of cells 6–12 into the second 6S slot from the positive side \"battery positive side, red cable\". Now connect it to the charger. If it hasn't flashed and smoked by then, you've done everything correctly!\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003e- Only now connect the thick red main charging cable \"+\" of the battery to the charger, then the thick black main charging cable \"-\".\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eConnections: Avoid short circuits, otherwise there is a risk of injury! This described sequence also applies when charging several batteries in series!\u003c\/b\u003e\u003cbr\u003e\n\u003cb\u003eYou are responsible for any damage and defects that may occur if these instructions are not followed!\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\nScope of delivery: Only the device itself is supplied!\u003c\/p\u003e","brand":"JUNSI Electronic","offers":[{"title":"Default Title","offer_id":53446260195671,"sku":"RC-iCharger-DX12","price":319.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-iCharger-DX12_b1_b3d37eeb-7534-405a-a031-968c1fa3e448.jpg?v=1779930069"},{"product_id":"junsi-icharger-dx6-2x-6s-lipo-1x-1500w","title":"Junsi iCharger DX6 - 2x 6S LiPo, 1x 1500W","description":"\u003ch1 style=\"text-align: center;\"\u003eJunsi iCharger DX6 - 2x 6S LiPo, 1x 1500W\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eAll Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! AGM batteries may not be charged in the PB program!\u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe new DX6 charger combines the advantages of the well-known Junsi iCharger 406DUO with the portability of a small pocket charger. Despite its small dimensions of 92 x 112 x 40 mm, there have been no compromises in performance and usability. The newly developed rotary knob has an excellent pressure point and greatly facilitates operation.\u003c\/p\u003e\n\n\u003cp\u003eThe technical data is impressive: 1500W charging power (from \u003e25V), 1-6s LiXx cells and up to 32 amps charging current are sufficient even for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can also be charged.\u003c\/p\u003e\n\n\u003cp\u003eThe discharge power is 60 watts total (40W per output if only one output is used), but can be increased to up to 1600W using an external load (discharge resistor). Of course, the iCharger DX6 also supports regenerative charging. In this process, the battery capacity, for example from a full flight battery, is fed back into the supply battery.\u003c\/p\u003e\n\n\u003cp\u003eThe balancing current of 4 amps total (2A per output) always ensures perfectly matched cell voltages.\u003c\/p\u003e\n\n\u003cp\u003eA USB-C PD port for charging smartphones etc (5V\/3A, 9V\/2A, 12V\/1.5A) or for software updates is also installed. The Micro SD slot can be used for data logging, but also for future updates.\u003c\/p\u003e\n\n\u003cp\u003ePower is supplied via an XT-90 connector on the back.\u003c\/p\u003e\n\n\u003cp\u003eThe charging outputs are located on the front and are designed as XT-60.\u003c\/p\u003e\n\n\u003cp\u003eAlso integrated is a servo tester; please note that an external power supply is necessary!\u003c\/p\u003e\n\n\u003cp\u003eThe menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.\u003c\/p\u003e\n\n\u003cp\u003eA 2.4\" IPS LCD display ensures good readability even in low light.\u003c\/p\u003e\n\n\u003cp\u003eInstructions in English are included with the charger on a CD; the German version can be downloaded from us.\u003c\/p\u003e\n\n\u003cp\u003eAll Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! \u003cbr\u003e\nAGM batteries may not be charged in the PB program!\u003c\/p\u003e","brand":"JUNSI Electronic","offers":[{"title":"Default Title","offer_id":53446260228439,"sku":"RC-iCharger-DX6","price":235.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-iCharger-DX6_b1_017d1d9d-1a6c-4c8b-a711-0a3e788a3697.jpg?v=1779930106"},{"product_id":"junsi-icharger-dx8-2x-8s-lipo-2x-1100w-oder-1x-1600w","title":"Junsi iCharger DX8 - 2x 8S LiPo, 2x 1100W or 1x 1600W","description":"\u003ch1 style=\"text-align: center;\"\u003eJunsi iCharger DX8 - 2x 8S LiPo, 2x 1100W or 1x 1600W\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eAll Junsi chargers of the X and DUO series are developed and approved for use in model building. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model building! AGM batteries may not be charged in the PB program! \u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe new DX8 charger combines the advantages of the well-known Junsi iCharger 308DUO with the size of a small pocket charger. Despite its small size of 97.5x128.5x40 mm, no compromises were made in terms of performance and usability. The newly developed rotary wheel has a very good pressure point and makes operation much easier.\u003c\/p\u003e\n\n\u003cp\u003eThe technical data is impressive: 1600W charging power (from \u003e25V), 1-8s LiXx cells and up to 30 amps of charging current are sufficient even for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can also be charged.\u003c\/p\u003e\n\n\u003cp\u003eThe discharge power is 70 watts total (45W per output if only one output is used), but can be increased to up to 2100W by means of an external load (discharge resistor). Of course, the iCharger DX8 also supports regenerative charging. Here, the battery capacity, for example, from a full flight battery, is fed back into the power supply battery.\u003c\/p\u003e\n\n\u003cp\u003eThe balancer current of 4 amps total (2A per output) always ensures perfectly balanced cell voltages.\u003c\/p\u003e\n\n\u003cp\u003eA USB-C PD port for charging smartphones etc (5V\/3A, 9V\/2A, 12V\/1.5A) or for software updates is also installed. The Micro SD slot can be used for logging data, but also for future updates.\u003c\/p\u003e\n\n\u003cp\u003eA servo tester is also integrated, please note that an external power supply is required here!\u003c\/p\u003e\n\n\u003cp\u003eThe menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.\u003c\/p\u003e\n\n\u003cp\u003eA 2.4 inch IPS LCD display ensures good readability even in low light.\u003c\/p\u003e\n\n\u003cp\u003eInstructions in English are included with the charger in the form of a CD; the German version can be downloaded from our website.\u003c\/p\u003e","brand":"JUNSI Electronic","offers":[{"title":"Default Title","offer_id":53446260326743,"sku":"RC-iCharger-DX8","price":282.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-iCharger-DX8_b1.jpg?v=1779930156"},{"product_id":"junsi-icharger-s6-1-6s-lipo-1100w","title":"Junsi iCharger S6, 1-6S LiPo, 1100W","description":"\u003ch1 style=\"text-align: center;\"\u003eJunsi iCharger S6, 1-6S LiPo, 1100W\u003c\/h1\u003e\n\n\u003cp\u003eWith the new iCharger S6, the renowned manufacturer Junsi has launched a pocket-sized charger that is unique in its class. Up to 6s can be charged directly with up to 40A!\u003c\/p\u003e\n\n\u003cp\u003eOperation is only via the significantly more stable rocker switch, as known from the Junsi X8!\u003c\/p\u003e\n\n\u003cp\u003eDespite the small dimensions of 83x71x36.5 mm, no compromises were made in terms of performance and usability.\u003c\/p\u003e\n\n\u003cp\u003eThe technical data are impressive: 1100W charging power (from 23.5V), 1-6s LiPo cells and up to 40 amps charging current are sufficient even for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can also be charged.\u003c\/p\u003e\n\n\u003cp\u003eThe discharge power is 50 watts, but can be increased to up to 1100W using an external load (discharge resistor). Of course, the iCharger S6 also supports regenerative charging. Here, the battery capacity, for example from a full flight battery, is fed back into the supply battery.\u003c\/p\u003e\n\n\u003cp\u003eThe 2 amp balancer current always ensures perfectly balanced cell voltages.\u003c\/p\u003e\n\n\u003cp\u003eA USB port and Micro SD slot can be used for logging data, but also for future updates.\u003c\/p\u003e\n\n\u003cp\u003eThe menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.\u003c\/p\u003e\n\n\u003cp\u003eA 2.4\" IPS LCD display ensures good readability even in low light.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eAll Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted!\u003c\/b\u003e\u003c\/p\u003e","brand":"JUNSI Electronic","offers":[{"title":"Default Title","offer_id":53446260588887,"sku":"RC-iCharger-S6","price":163.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-iCharger-S6_b1.jpg?v=1779814360"},{"product_id":"junsi-icharger-x12-lader-bis-1100-watt-dc-11-53-volt-1-12-liio-lipo-life-lihv","title":"Junsi iCharger X12 Charger, up to 1100 Watts, DC 11-53 Volts, 1-12 LiIo\/LiPo\/LiFe\/LIHV","description":"\u003ch1 style=\"text-align: center;\"\u003eJunsi iCharger X12 Charger, up to 1100 Watt, DC 11-53 Volt, 1-12 LiXX\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eAll Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! AGM batteries may not be charged in the PB program! \u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eVery compact 1100W charger with integrated balancer, USB port and card slot for Micro SD cards and 2A balancer current! With the new iCharger X12, the renowned manufacturer Junsi has launched a pocket-sized charger that can charge up to 12S LiXX! Despite its small size of 112x64x37 mm, there were no compromises in terms of performance and usability.\u003cbr\u003e\nThe technical data is impressive: 1100W charging power (from 23.5V input voltage), 1-12S LiXX cells and up to 30 amps charging current are sufficient even for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can also be charged.\u003cbr\u003e\nThe discharge power is 50W, but can be increased to up to 1100W by means of an external load (discharge resistor). The iCharger X12 can, of course, also perform regenerative charging. Here, the battery capacity, for example, of a full flight battery, is fed back into the supply battery. The balancer current of 2 amps always ensures perfectly balanced cell voltages, even with large batteries. A USB port and Micro SD slot can be used for logging data, but also for future updates. The menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.\u003cbr\u003e\nA 2.4\" IPS LCD display ensures good readability even in low light.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eATTENTION! \u003cspan\u003eTo be able to charge 12S, a 13-pin XH connector strip on the battery is required! There is \u003cb\u003e\u003cu\u003eNO\u003c\/u\u003e balancer board included to charge e.g. 2x6S as 12S! This must be purchased separately (CB-12XH). For 10S as 2x 5S, the well-known CB-1010 with the 11-11 Wire can be used!\u003c\/b\u003e\u003c\/span\u003e\u003cb\u003e   \u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e \u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMicroprocessor-controlled high-performance quick charger\/discharger and balancer\u003c\/li\u003e\n\t\u003cli\u003e2.4 inch IPS LCD color display - 320x240\u003c\/li\u003e\n\t\u003cli\u003eSupported battery types: LiIo\/LiPo\/LiFe\/LIHV\/LTO\/NiZn, NiMH\/NiCd, Pb\u003c\/li\u003e\n\t\u003cli\u003eCell count: 1-12 LiIo\/LiPo\/LiFe\/LIHV\/LTO\/NiZn\u003c\/li\u003e\n\t\u003cli\u003e1-32 NiMH\/NiCd\u003c\/li\u003e\n\t\u003cli\u003e1-20Pb (2-40 V)\u003c\/li\u003e\n\t\u003cli\u003eInput voltage: DC 11-53 V\u003c\/li\u003e\n\t\u003cli\u003eInput current: \u0026lt; 35A\u003c\/li\u003e\n\t\u003cli\u003eMax. charging power: 1100W from approx. 23.5V input voltage\u003c\/li\u003e\n\t\u003cli\u003eCharging current: 0.05 - 30A\u003c\/li\u003e\n\t\u003cli\u003eMax. discharge power: 50W\u003c\/li\u003e\n\t\u003cli\u003eDischarge current: 0.05 - 30A\u003c\/li\u003e\n\t\u003cli\u003eRegenerative discharge: up to 1100W\u003c\/li\u003e\n\t\u003cli\u003eDischarge with external load max.: 1500W 50V\/30A\u003c\/li\u003e\n\t\u003cli\u003eBalancer current: 2A per cell\u003c\/li\u003e\n\t\u003cli\u003eAutomatic fan control - 1 fan\u003c\/li\u003e\n\t\u003cli\u003eMicro USB Port\u003c\/li\u003e\n\t\u003cli\u003eMicro SD slot for storing logs and data\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 112x64x37 +\/- 0.5mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: 230g\u003c\/li\u003e\n\t\u003cli\u003eFurther functions: Storage of charging programs and export to SD card\u003c\/li\u003e\n\t\u003cli\u003eInternal resistance measurement of the cells\u003c\/li\u003e\n\t\u003cli\u003eServo tester\u003c\/li\u003e\n\t\u003cli\u003eFirmware update possible via USB connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e \u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eJunsi iCharger X12\u003c\/li\u003e\n\t\u003cli\u003e1x output cable with XT60 socket\u003c\/li\u003e\n\t\u003cli\u003e1x input cable with XT60 socket\u003c\/li\u003e\n\t\u003cli\u003eInstallation CD with software      \u003cb\u003e  \u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JUNSI Electronic","offers":[{"title":"Default Title","offer_id":53446260654423,"sku":"RC-iCharger-X12","price":207.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-iCharger-X12_b1.jpg?v=1779980058"},{"product_id":"junsi-icharger-x6-ladegerat-800w-6s","title":"Junsi iCharger X6, Charger 800W, 6S","description":"\u003ch1\u003e\u003cb\u003eJunsi iCharger X6, Charger 800W, 6S\u003c\/b\u003e\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eAll Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! AGM batteries may not be charged in the PB program!\u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eCompact 800W charger with integrated balancer, USB port and card slot for Micro SD cards. 2A balancer current\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003eMicroprocessor controlled high-performance fast charger\/discharger and balancer\u003c\/li\u003e\n\t\u003cli\u003e2.4\" IPS LCD color display - 320x240\u003c\/li\u003e\n\t\u003cli\u003eSupported battery types: LiIo\/LiPo\/LiFe\/LIHV\/LTO\/NiZn, NiMH\/NiCd, Pb\u003c\/li\u003e\n\t\u003cli\u003eCell count: 1-6 LiIo\/LiPo\/LiFe\/LIHV\/LTO\/NiZn, 1-16 NiMH\/NiCd, 1-12 Pb (2-24 V)\u003c\/li\u003e\n\t\u003cli\u003eInput voltage: DC 7-32 V\u003c\/li\u003e\n\t\u003cli\u003eInput current: \u0026lt; 35A\u003c\/li\u003e\n\t\u003cli\u003eMax. charging power: 800W from approx. 23.5V input voltage\u003c\/li\u003e\n\t\u003cli\u003eCharging power at 12V input voltage: \u003e400W\u003c\/li\u003e\n\t\u003cli\u003eCharging current: 0.05 - 30A\u003c\/li\u003e\n\t\u003cli\u003eMax. discharge power: 30W\u003c\/li\u003e\n\t\u003cli\u003eDischarge current: 0.05 - 30A\u003c\/li\u003e\n\t\u003cli\u003eRegenerative discharge: up to 800W\u003c\/li\u003e\n\t\u003cli\u003eDischarge with external load max.: 900W 30V\/30A\u003c\/li\u003e\n\t\u003cli\u003eBalancer current: 2A per cell\u003c\/li\u003e\n\t\u003cli\u003eAutomatic fan control - 1 fan\u003c\/li\u003e\n\t\u003cli\u003eMicro USB Port\u003c\/li\u003e\n\t\u003cli\u003eMicro SD slot for saving logs and data\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 83×64.5×37 ±0.5mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: 168g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eFurther functions:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003eStorage of charging programs and export to SD card\u003c\/li\u003e\n\t\u003cli\u003eInternal resistance measurement of cells\u003c\/li\u003e\n\t\u003cli\u003eServo test\u003c\/li\u003e\n\t\u003cli\u003eFirmware update possible via USB connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003eJunsi iCharger X6\u003c\/li\u003e\n\t\u003cli\u003e1x Output cable 3.3 mm² with XT60 socket\u003c\/li\u003e\n\t\u003cli\u003e1x Input cable 3.3 mm² with XT60 socket\u003c\/li\u003e\n\t\u003cli\u003eInstallation CD with software and instructions in English\u003c\/li\u003e\n\t\u003cli\u003ePrinted German instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JUNSI Electronic","offers":[{"title":"Default Title","offer_id":53446260687191,"sku":"RC-iCharger-X6","price":138.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-iCharger-X6_b1.jpg?v=1779814396"},{"product_id":"junsi-icharger-x8-lader-bis-1100-watt-dc-9-49-volt-1-8-liio-lipo-life-lihv","title":"Junsi iCharger X8 Charger, up to 1100 Watts, DC 9-49 Volts, 1-8 LiIo\/LiPo\/LiFe\/LIHV","description":"\u003ch1 style=\"text-align: center;\"\u003eJunsi iCharger X8 Charger, up to 1100 Watt, DC 9-49 Volt, 1-8 LiIo\/LiPo\/LiFe\/LIHV\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eAll Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! AGM batteries may not be charged with the PB program!\u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eCompact 1100W charger with integrated balancer, USB port and card slot for Micro SD cards. 2A balancer current\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMicroprocessor-controlled high-performance fast charger\/discharger and balancer\u003c\/li\u003e\n\t\u003cli\u003e2.4\" IPS LCD color display - 320x240\u003c\/li\u003e\n\t\u003cli\u003eSupported battery types: LiIo\/LiPo\/LiFe\/LIHV\/LTO\/NiZn, NiMH\/NiCd, Pb\u003c\/li\u003e\n\t\u003cli\u003eCell count: 1-8 LiIo\/LiPo\/LiFe\/LIHV\/LTO\/NiZn\u003c\/li\u003e\n\t\u003cli\u003e1-20 NiMH\/NiCd\u003c\/li\u003e\n\t\u003cli\u003e1-15Pb (2-30 V)\u003c\/li\u003e\n\t\u003cli\u003eInput voltage: DC 9-49 V\u003c\/li\u003e\n\t\u003cli\u003eInput current: \u0026lt; 35A\u003c\/li\u003e\n\t\u003cli\u003eMax. charging power: 1100W from approx. 32V input voltage\u003c\/li\u003e\n\t\u003cli\u003eCharging power at 12V input voltage: approx. 400W\u003c\/li\u003e\n\t\u003cli\u003eCharging power at 24V input voltage: approx. 800W\u003c\/li\u003e\n\t\u003cli\u003eCharging power at 30V input voltage: approx. 1000W\u003c\/li\u003e\n\t\u003cli\u003eCharging current: 0.05 - 30A\u003c\/li\u003e\n\t\u003cli\u003eMax. discharge power: 50W\u003c\/li\u003e\n\t\u003cli\u003eDischarge current: 0.05 - 30A\u003c\/li\u003e\n\t\u003cli\u003eRegenerative discharge: up to 1100W\u003c\/li\u003e\n\t\u003cli\u003eDischarge with external load max.: 1000W 33.5V\/30A\u003c\/li\u003e\n\t\u003cli\u003eBalancer current: 2A per cell\u003c\/li\u003e\n\t\u003cli\u003eAutomatic fan control - 1 fan\u003c\/li\u003e\n\t\u003cli\u003eMicro USB Port\u003c\/li\u003e\n\t\u003cli\u003eMicro SD slot for saving logs and data\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 97.5×64.5×37 ±0.5mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: 200g\u003c\/li\u003e\n\t\u003cli\u003eAdditional functions: Storage of charging programs and export to SD card\u003c\/li\u003e\n\t\u003cli\u003eInternal resistance measurement of cells\u003c\/li\u003e\n\t\u003cli\u003eServo test\u003c\/li\u003e\n\t\u003cli\u003eFirmware update possible via USB connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eJunsi iCharger X8\u003c\/li\u003e\n\t\u003cli\u003e1x Output cable 3.3 mm² with XT60 socket\u003c\/li\u003e\n\t\u003cli\u003e1x Input cable 3.3 mm² with XT60 socket\u003c\/li\u003e\n\t\u003cli\u003eInstallation CD with software and instructions in English\u003c\/li\u003e\n\t\u003cli\u003ePrinted German instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JUNSI Electronic","offers":[{"title":"Default Title","offer_id":53446260752727,"sku":"RC-iCharger-X8","price":160.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-iCharger-X8_b1.jpg?v=1779814414"},{"product_id":"isdt-smart-charger-k1-duo-lader-100-250w-110-240v-ac-und-10-30v-dc","title":"ISDT SMART CHARGER K1, Dual Charger, 100\/250W, 110\/240V AC and 10-30V DC","description":"\u003ch1 style=\"text-align: center;\"\u003eISDT SMART CHARGER K1, Duo Charger, 100W at 110\/240V \/ 250W at AC 10-30V DC\u003c\/h1\u003e\n\n\u003cp\u003eThe new iSDT K1 DUO charger is a powerful, compact, all-around charger. Thanks to the integrated power supply with 100W output, it can charge quickly at home from a 230V socket with up to 100W, which is distributed per port as needed.\u003cbr\u003e\nIf the K1 DUO charger is supplied with DC voltage, for example from a battery or an external, more powerful power supply, up to 2x 250W output is possible! (\u003e 24V required!)\u003c\/p\u003e\n\n\u003cp\u003eIt can charge 1-6s LiXx cells. The powerful balancer provides up to 0.5A per cell, ensuring optimal battery care and maximum performance.\u003c\/p\u003e\n\n\u003cp\u003eThe excellent 2.4-inch IPS display is easy to read even in sunlight and simplifies operation. This is done very intuitively and precisely with the 3 buttons per charging output.\u003c\/p\u003e\n\n\u003cp\u003eThe USB-C port can be used for software updates. Thanks to its compact design of 135 x 115 x 49 and a weight of only 485g, the K1 is easy to use on the go.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eNo balancer board is included with the charger!\u003c\/b\u003e\u003cb\u003e\u003ci\u003e \u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53446260818263,"sku":"RC-K1","price":96.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-K1_b1.jpg?v=1779814432"},{"product_id":"isdt-smart-charger-k2-zip-duo-lader-2x-8s-2x-500w-110-240v-ac-und-10-30v-dc","title":"ISDT SMART-CHARGER K2-ZIP, Dual Charger, 2x 8S, 2x 500W, 110\/240V AC and 10-30V DC","description":"\u003ch1 style=\"text-align: center;\"\u003eISDT SMART-CHARGER K2-ZIP, Duo Charger, 2x 8S, 2x 500W, 110\/240V AC and 10-30V DC\u003c\/h1\u003e\n\n\u003cp\u003eThe new iSDT K2 ZIP DUO charger is a powerful, compact all-round charger and the successor to the proven K2. Thanks to the integrated 200W power supply, charging at home from a 230V outlet is fast, with up to 200W of power, which is distributed among the individual outputs as needed.\u003cbr\u003e\nIf the K2 AIR DUO charger is supplied with DC voltage, for example by a battery or a more powerful external power supply, up to 2x 500W of power is possible! (Input voltage \u003e 24V required!)\u003c\/p\u003e\n\n\u003cp\u003e2x 2-8S LiXx cells can be charged simultaneously, or in parallel mode, 1 pack with up to 800W. \u003cbr\u003e\nThe extremely powerful balancer delivers up to 1.5A per cell, ensuring your batteries are optimally maintained and guaranteeing maximum performance and short charging times.\u003cbr\u003e\nThe easy-to-read 2.8-inch IPS display is also easy to use in sunlight. Operation is very intuitive and precise with the 3 buttons per charging output.\u003c\/p\u003e\n\n\u003cp\u003eThe USB-C port can be used for software updates and offers the function of charging a smartphone, for example, with 5V\/2A.\u003c\/p\u003e\n\n\u003cp\u003eThanks to its compact design of 133 x 126 x 57.7mm and a weight of only 776g, the K2 ZIP is easy to use on the go. \u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eNo balancer board is included with the charger!\u003c\/b\u003e\u003c\/p\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53446260851031,"sku":"RC-K2-ZIP","price":125.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-K2-ZIP_b1_3277210f-ec24-41d3-a53e-92f1b8d64460.jpg?v=1780599888"},{"product_id":"isdt-smart-charger-k4-duo-800-60w-20a-bis-8s-lipo","title":"iSDT SMART CHARGER K4 DUO, 800\/60W, 20A, up to 8S Lipo","description":"\u003ch1 style=\"text-align: center;\"\u003eiSDT SMART CHARGER K4 DUO, 800\/60W,\u003cbr\u003e\n20A, up to 8S Lipo\u003c\/h1\u003e\n\n\u003cp\u003eThe new iSDT K4 DUO charger is a powerful, compact, all-round charger. Thanks to the integrated power supply with 400W output, it can quickly charge with up to 400W at home via a 230V socket, which is distributed per port as required.\u003c\/p\u003e\n\n\u003cp\u003eIf the K4 DUO charger is supplied with DC voltage, for example from a battery or an external, more powerful power supply unit, up to 2x 600W output is possible! (min. 24V required!)\u003c\/p\u003e\n\n\u003cp\u003e1-8s LiXX cells can be charged, with up to 800W possible in parallel mode. The extremely powerful balancer delivers up to 1.5A per cell, ensuring your batteries are optimally maintained and maximum performance is guaranteed.\u003c\/p\u003e\n\n\u003cp\u003eThe 2.8-inch IPS display is easy to read even in direct sunlight and simplifies operation. Operation is very intuitive and precise with the 3 buttons per charging output. \u0026nbsp;\u003c\/p\u003e\n\n\u003cp\u003eThe USB-C port can be used for software updates and offers the function of charging a smartphone, for example, with 5V\/2A.\u003c\/p\u003e\n\n\u003cp\u003eThanks to its compact design of 176 x 183 x 57mm and a weight of only 1230g, the K4 is easy to use on the go.\u003c\/p\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53446260883799,"sku":"RC-K4","price":201.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-K4_b1_14acd868-8ac5-4c16-a9b8-33dfe114ffbe.jpg?v=1779907309"},{"product_id":"isdt-smart-p10-duo-lader-2x6s-max-2x-250w-max-10a-10-30v-dc","title":"iSDT SMART P10 Duo Charger, 2x6S max. 2x 250W, max. 10A, 10-30V DC","description":"\u003ch1 style=\"text-align: center;\"\u003eiSDT P10 Duo Charger, 2x6S max. 2x 250W, max. 10A \u003c\/h1\u003e\n\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003e !!!ATTENTION - THIS CHARGER CANNOT DISCHARGE!!! \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eVery compact 2-channel charger with 2x 250 watts charging power and up to 2x 6 cell Lipo. A single channel delivers up to 10A charging current. The balancer works with up to 500mA\/cell. The new ScOS 2.0 operating system has been optimized for improved system stability and expands the functionality with additional programs:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eDC Power - one output can be used as a DC output, voltage and current are adjustable\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003edark mode - the display switches for use in the dark\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWith the \"parallel task\" program, both charging outputs are connected. This allows a battery pack to be charged with the full 400W. One of the two balancer ports can be used for balancing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eInput voltage: 10-30V - DC voltage\u003c\/li\u003e\n\t\u003cli\u003eInput current max: 20A\u003c\/li\u003e\n\t\u003cli\u003eOutput voltage: 1-34V\u003c\/li\u003e\n\t\u003cli\u003eTotal charging power: 500W (from 25V input voltage)\u003c\/li\u003e\n\t\u003cli\u003eCharging power: 250W per channel \u003c\/li\u003e\n\t\u003cli\u003eCharging current per channel: 0.2-10A\u003c\/li\u003e\n\t\u003cli\u003eBalancer current: 500mA\/cell\u003c\/li\u003e\n\t\u003cli\u003eAdjustable charging termination voltage: up to 4.35V for LiHV\u003c\/li\u003e\n\t\u003cli\u003eCell count - battery type: 1-6 LiXX, 1-6 LiHv, 1-16 NiXX, 1-10 PB per channel \u003c\/li\u003e\n\t\u003cli\u003eWeight: 250 g\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cspan\u003eDimensions: \u003c\/span\u003e90.5×90.5x47 mm\u003c\/li\u003e\n\t\u003cli\u003eColor display: 2.4 inch IPS LCD, easy to read even in daylight and at an oblique viewing angle\u003c\/li\u003e\n\t\u003cli\u003eUpdatable via USB\u003c\/li\u003e\n\t\u003cli\u003eMultilingual menu navigation, German also possible \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eNo balancer board is included with the charger!\u003c\/b\u003e\u003c\/p\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53446261014871,"sku":"RC-P10","price":60.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-P10_b1.jpg?v=1779814490"},{"product_id":"isdt-smart-p20-duo-lader-battgo-2x-500w-20a-8s-lipo-10-30v-dc","title":"iSDT SMART P20 Duo Charger, BATTGO, 2x 500W, 20A, 8S Lipo, 10-30V DC","description":"\u003ch1 style=\"text-align: center;\"\u003eiSDT SMART DUO CHARGER P20, 2x 500W, 20A, 8S Lipo, 10-30V DC\u003c\/h1\u003e\n\n\u003cp\u003eVery compact 2-channel charger with 2x 500 watts of charging power and up to 2x 8-cell LiPo. A single channel can deliver a maximum of 500W. The max. charging current per output is 20A. The balancer works with up to 1500mA\/cell.\u003c\/p\u003e\n\n\u003cp\u003eThe new ScOS 2.0 operating system has been optimized for improved system stability and expands the functionality with additional programs:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eDC Power - the output can be used as a DC output, voltage and current are adjustable\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003edark mode - the display is switched for use in the dark\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003ebattery scrap - if a battery is to be disposed of, it can be discharged to 0V with this function\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWith the \"parallel task\" program, both charging outputs are connected. This allows a battery pack to be charged with a maximum of 800W. One of the two balancer ports can be used for balancing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eInput voltage: 10-34V - DC voltage\u003c\/li\u003e\n\t\u003cli\u003eMax input current: 35A\u003c\/li\u003e\n\t\u003cli\u003eOutput voltage: 2-30V max. 150W\u003c\/li\u003e\n\t\u003cli\u003eTotal charging power: 1000W (from 25V input voltage)\u003c\/li\u003e\n\t\u003cli\u003eCharging power: 500W per channel\u003c\/li\u003e\n\t\u003cli\u003eDischarge power per channel: 15W\u003c\/li\u003e\n\t\u003cli\u003eCharging current per channel: 0.2-20A\u003c\/li\u003e\n\t\u003cli\u003eDischarge current per channel: \u003c\/li\u003e\n\t\u003cli\u003eBalancer current: 1500mA\/cell\u003c\/li\u003e\n\t\u003cli\u003eAdjustable end-of-charge voltage: up to 4.35V for LiHV\u003c\/li\u003e\n\t\u003cli\u003eNumber of cells - battery type: 1-8 LiXX, 1-7 LiHv, 1-16 NiXX, 1-12 Pb per channel\u003c\/li\u003e\n\t\u003cli\u003eWeight: 250 g\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 105x105x65 mm\u003c\/li\u003e\n\t\u003cli\u003eColor display: 2.4 inch IPS LCD, easy to read even in daylight and at an oblique viewing angle\u003c\/li\u003e\n\t\u003cli\u003eUpdatable via USB\u003c\/li\u003e\n\t\u003cli\u003eMultilingual menu navigation also available in German\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eNo balancer board is included with the charger!\u003c\/b\u003e\u003c\/p\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53446261047639,"sku":"RC-P20","price":109.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-P20_b1_e01c18e1-3f8b-48e0-9021-b1bea51f01a7.jpg?v=1779930198"},{"product_id":"isdt-smart-p30-duo-lader-1500w-30a-8s-lipo-10-34v-dc","title":"iSDT SMART P30 Duo Charger, 1500W, 30A, 8S Lipo, 10-34V DC","description":"\u003ch1 style=\"text-align: center;\"\u003eiSDT SMART DUO CHARGER P30, 1500W, 30A, 8S Lipo\u003c\/h1\u003e\n\n\u003cp\u003eVery compact 2-channel charger with 1500 watts total charging power and up to 8-cell Lipo. A single channel can be operated with up to 1000W charging power. The max. charging current is 30A. The balancer works with up to 1500mA\/cell.\u003c\/p\u003e\n\n\u003cp\u003eThe new ScOS 2.0 operating system has been optimized for improved system stability and extends the functionality with additional programs:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDC Power - the output can be used as a DC output, voltage and current are adjustable\u003c\/li\u003e\n\t\u003cli\u003edark mode - the display switches for use in the dark\u003c\/li\u003e\n\t\u003cli\u003ebattery scrap - if a battery is to be disposed of, it can be discharged to 0V with this function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe P30 can also run both channels with the same program using the \"Dual Task\" program. This means you only enter the charging parameters once.\u003c\/p\u003e\n\n\u003cp\u003eWith the \"parallel task\" program, both charging outputs are connected together. This allows a battery pack to be charged with the full 1500W. One of the two balancer ports can be used for balancing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eInput voltage: 10-34V - DC voltage\u003c\/li\u003e\n\t\u003cli\u003eMax input current: 60A\u003c\/li\u003e\n\t\u003cli\u003eOutput voltage: 1-34V\u003c\/li\u003e\n\t\u003cli\u003eTotal charging power: 1500W (from 25V input voltage)\u003c\/li\u003e\n\t\u003cli\u003eCharging power: 1000W per channel (the limit is the possible total charging power of 1500W, e.g. 2x 750W)\u003c\/li\u003e\n\t\u003cli\u003eDischarge power per channel: 30W\u003c\/li\u003e\n\t\u003cli\u003eCharging current per channel: 0.2-30A\u003c\/li\u003e\n\t\u003cli\u003eDischarge current per channel: 0.2-3A\u003c\/li\u003e\n\t\u003cli\u003eBalancer current: 1500mA\/cell\u003c\/li\u003e\n\t\u003cli\u003eAdjustable charging termination voltage: up to 4.35V for LiHV\u003c\/li\u003e\n\t\u003cli\u003eNumber of cells - battery type: 1-8 LiXX, 1-7 LiHv, 1-16 NiXX, 1-12 Pb per channel\u003c\/li\u003e\n\t\u003cli\u003eWeight: 730 g\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 110x110x65 mm\u003c\/li\u003e\n\t\u003cli\u003eColor display: 2.8\" 240x320 IPS LCD, easy to read even in daylight and at an acute angle\u003c\/li\u003e\n\t\u003cli\u003eUpdatable via USB\u003c\/li\u003e\n\t\u003cli\u003eMultilingual menu navigation, also available in German\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eNo balancer board is included with the charger!\u003c\/b\u003e\u003c\/p\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53446261113175,"sku":"RC-P30","price":184.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-P30_b1.jpg?v=1779814525"},{"product_id":"isdt-smart-charger-q6-nano-200w-8a-6s-lipo","title":"iSDT SMART CHARGER Q6 Nano, 200W, 8A, 6S LiPo","description":"\u003ch1 style=\"text-align: center;\"\u003eiSDT SMART CHARGER Q6 Nano, 200W, 8A, 6S Lipo\u003c\/h1\u003e\n\n\u003cp\u003e200 watts charging power with up to 8A charging current, powerful balancer with 500mA\/cell, up to 6 cells LiFe\/LiIon\/LiPo\/LiHV. Very compact charger with bright color display.\u003c\/p\u003e\n\n\u003cp\u003eThe new operating system ScOS 2.0 has been optimized for improved system stability and expands functionality with additional programs:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDC Power - the output can be used as a DC output; voltage and current are adjustable\u003c\/li\u003e\n\t\u003cli\u003edark mode - for use in the dark, the display switches modes\u003c\/li\u003e\n\t\u003cli\u003ebattery scrap - if a battery needs to be disposed of, this function can discharge it to 0V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eInput voltage: 10-30V - DC voltage\u003c\/li\u003e\n\t\u003cli\u003eMax input current: 9A\u003c\/li\u003e\n\t\u003cli\u003eOutput voltage: 1-30V\u003c\/li\u003e\n\t\u003cli\u003eCharging power: 200W (from 24V input voltage)\u003c\/li\u003e\n\t\u003cli\u003eDischarge power: 10W\u003c\/li\u003e\n\t\u003cli\u003eCharging current: 0.1-8A\u003c\/li\u003e\n\t\u003cli\u003eDischarge current: 0.1-1A\u003c\/li\u003e\n\t\u003cli\u003eBalancer current: 500mA\/cell\u003c\/li\u003e\n\t\u003cli\u003eAdjustable charge termination voltage: up to 4.35V for LiHV\u003c\/li\u003e\n\t\u003cli\u003eCell count - battery type: 1-6 LiXX, 1-16 NiXX, 1-12 Pb\u003c\/li\u003e\n\t\u003cli\u003eWeight: 120 g\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 72x72x32 mm\u003c\/li\u003e\n\t\u003cli\u003eColor display: 1.5\" 240x240 IPS LCD, easily readable even in daylight and at an oblique angle\u003c\/li\u003e\n\t\u003cli\u003eUpdateable via USB\u003c\/li\u003e\n\t\u003cli\u003eMultilingual menu navigation, also available in German\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003cbr\u003e\n\u003cbr\u003e\nCharger in white\u003cbr\u003e\nDetailed instructions in German\u003c\/p\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53446261277015,"sku":"RC-Q6","price":33.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-Q6_b1.jpg?v=1779983591"},{"product_id":"isdt-q6-retro-2-6s-lader-max-350w","title":"iSDT Q6 Retro, 2-6S Charger, max. 350W","description":"\u003ch1 style=\"text-align: center;\"\u003eiSDT Q6 Retro, 2-6S Charger, max. 350W\u003c\/h1\u003e\n\n\u003cp\u003eThe new iSDT Q6 Retro charger is a powerful compact charger and the performance-optimized successor to the popular Q6.\u003c\/p\u003e\n\n\u003cp\u003eThe Q6 Retro supports the BattAir system. The data from the BAPs (BattAirPlugs) is transmitted directly wirelessly to the Q6 Retro.\u003c\/p\u003e\n\n\u003cp\u003e1-6s LiXx cells can be charged with up to 16A (max. 350W).\u003c\/p\u003e\n\n\u003cp\u003eThe extremely powerful balancer provides up to 1.5A \/ cell, ensuring optimal battery care and maximum performance.\u003c\/p\u003e\n\n\u003cp\u003eThe 2.4 inch IPS display is easy to read even in sunlight and significantly simplifies operation. This is done very intuitively and precisely with just one rotary wheel in the center.\u003c\/p\u003e\n\n\u003cp\u003eThe USB-C port can be used for software updates.\u003c\/p\u003e\n\n\u003cp\u003eThanks to its compact design of 80 x 80 x 33.5 and a weight of only 190g, the Q6 Retro is ideal for on the go.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eInput voltage: 10-30V - DC voltage\u003c\/li\u003e\n\t\u003cli\u003eCharging power: 350W (from 27V input voltage)\u003c\/li\u003e\n\t\u003cli\u003eDischarge power: 10W\u003c\/li\u003e\n\t\u003cli\u003eCharging current: 0.1-16A\u003c\/li\u003e\n\t\u003cli\u003eBalancer current: 1500mA\/cell\u003c\/li\u003e\n\t\u003cli\u003eAdjustable charge termination voltage: up to 4.35V for LiHV\u003c\/li\u003e\n\t\u003cli\u003eNumber of cells - battery type: 1-6 LiXX, 1-6 LiHV \u0026amp; ULiHv 1-16 NiXX, 1-12 Pb\u003c\/li\u003e\n\t\u003cli\u003eWeight: 190 g\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 80x80x35mm\u003c\/li\u003e\n\t\u003cli\u003eColor display: 2.4 inch IPS LCD, easy to read even in daylight and at an oblique viewing angle of up to 178°\u003c\/li\u003e\n\t\u003cli\u003eUpdatable via USB\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53446262391127,"sku":"RC-Q6-Retro","price":54.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-Q6-Retro_b1.jpg?v=1780483458"},{"product_id":"isdt-smart-charger-q8-max-1000w-30a-8s-lipo","title":"iSDT SMART CHARGER Q8 Max, 1000W, 30A, 8S Lipo","description":"\u003ch1 style=\"text-align: center;\"\u003eiSDT SMART CHARGER Q8 Max, 1000W, 30A, 8S Lipo\u003c\/h1\u003e\n\n\u003cp\u003e1000 watts of charging power with up to 30A charging current, powerful balancer with 1500mA\/cell, up to 8 cells LiFe\/LiIon\/LiPo, 7 cells LiHv. A very compact charger for such high performance. The display is a high-brightness color display.\u003c\/p\u003e\n\n\u003cp\u003eThe new ScOS 2.0 operating system has been optimized for improved system stability and extends the functionality with additional programs:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDC Power - the output can be used as a DC output; voltage and current are adjustable\u003c\/li\u003e\n\t\u003cli\u003edark mode - the display switches for use in the dark\u003c\/li\u003e\n\t\u003cli\u003ebattery scrap - if a battery needs to be disposed of, it can be discharged to 0V with this function\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eInput voltage: 10-34V - DC voltage\u003c\/li\u003e\n\t\u003cli\u003eMax input current: 33A\u003c\/li\u003e\n\t\u003cli\u003eOutput voltage: 1-34V\u003c\/li\u003e\n\t\u003cli\u003eCharging power: 1000W (from 32V input voltage)\u003c\/li\u003e\n\t\u003cli\u003eDischarge power: 30W\u003c\/li\u003e\n\t\u003cli\u003eCharging current: 0.2-30A\u003c\/li\u003e\n\t\u003cli\u003eDischarge current: 0.2-3A\u003c\/li\u003e\n\t\u003cli\u003eBalancer current: 1500mA\/cell\u003c\/li\u003e\n\t\u003cli\u003eAdjustable charge termination voltage: up to 4.35V for LiHV\u003c\/li\u003e\n\t\u003cli\u003eCell count - battery type: 1-8 LiXX, 1-7 LiHv, 1-16 NiXX, 1-12 Pb\u003c\/li\u003e\n\t\u003cli\u003eWeight: 288 g\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 95x95x45 mm\u003c\/li\u003e\n\t\u003cli\u003eColor display: 2.8\" 240x320 IPS LCD, easily readable even in daylight and at an oblique viewing angle\u003c\/li\u003e\n\t\u003cli\u003eUSB updateable\u003c\/li\u003e\n\t\u003cli\u003eMulti-language menu, also available in German\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of Delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCharger in black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eRequired Accessories:\u003c\/b\u003e \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cb\u003e\u003cb\u003e\u003cb\u003eUniversal Balancer Board for 8S: Item No. M118339\u003c\/b\u003e\u003c\/b\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53446262718807,"sku":"RC-Q8Max","price":96.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RC-Q8Max_b1.jpg?v=1779814571"},{"product_id":"expert-ld-300-ladegerat-fur-1-6s-lipo-max-16a-300w-dc","title":"Expert LD 300 Charger for 1-6S LiPo, max. 16A, 300W DC","description":"\u003ch1\u003eExpert LD 300 Charger for 1-6S LiPo, max. 16A, 300W DC\u003c\/h1\u003e\n\n\u003cp\u003eCompact dimensions and excellent charging performance are combined in the Robitronic Expert LD 300 charger. The easy-to-read and high-contrast color display shows all parameters important for the charging\/discharging process. The Expert LD 300 is operated simply and intuitively via a rotary push-button. The small charger offers all common charging and discharging programs such as: Charge, Balance-Charge, Fast-Charge, Storage and Discharge. This small charger should always be with you!\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eHandy dimensions\u003c\/li\u003e\n\t\u003cli\u003eExcellent performance data\u003c\/li\u003e\n\t\u003cli\u003eMenu language selectable: DE\/EN\/FR\/ES\u003c\/li\u003e\n\t\u003cli\u003eHigh-contrast color display\u003c\/li\u003e\n\t\u003cli\u003eEasiest operation via just one rotary button\u003c\/li\u003e\n\t\u003cli\u003eXT-60 connector at input and output\u003c\/li\u003e\n\t\u003cli\u003eXH balancer port on charger\u003c\/li\u003e\n\t\u003cli\u003eVarious safety monitoring features\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1x Expert LD 300 Charger\u003c\/li\u003e\n\t\u003cli\u003e1x Cable with XT60 male-female connector\u003c\/li\u003e\n\t\u003cli\u003e1x Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Robitronic","offers":[{"title":"Default Title","offer_id":53447394885975,"sku":"RO-R01014","price":41.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RO-R01014_b1.jpg?v=1779816790"},{"product_id":"skyrc-e680-ladegerat-lipo-1-6s-10a-80w-12-oder-220v","title":"SkyRC e680 Charger, LiPo 1-6S, 10A, 80W, 12 or 220V","description":"\u003ch1\u003eSkyRC e680 Charger, LiPo 1-6S, 10A, 80W, 12 or 220V\u003c\/h1\u003e\n\n\u003cp\u003eThe SkyRC e680 Universal Charger is easy to use while offering a variety of features. All common battery types such as LiPo\/LiIon\/LiFe\/LiHV\/NiMH\/NiCd\/Pb and the DJI Mavic system battery are supported by the microprocessor. The charger masters all common charging and discharging modes like Charge, Balance-Charge, Fast-Charge, Storage, and Discharge. Especially in the Pb program, the charger offers an AGM and cold charging mode. DJI Mavic batteries are also supported with their own mode (optional charging cable required). In addition, the e680 can supply power to consumers such as tire grinders, LED-Pit lamps, motor testers, etc., directly with 13.8V and a maximum of 80W output via the power supply function.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eExcellent performance data max. 8A\/80W\u003c\/li\u003e\n\t\u003cli\u003eIntegrated power supply function 13.8V\/80W\u003c\/li\u003e\n\t\u003cli\u003e10 profile memories\u003c\/li\u003e\n\t\u003cli\u003eTVC Terminal Voltage Control\u003c\/li\u003e\n\t\u003cli\u003eInternal balancer with XH connection\u003c\/li\u003e\n\t\u003cli\u003eEasiest 4-button operation\u003c\/li\u003e\n\t\u003cli\u003eLead-acid battery AGM and cold charging mode\u003c\/li\u003e\n\t\u003cli\u003eSuitable for LiPo\/LiHV\/LiIon\/LiFe\/NiCd\/NiMH\/Pb and DJI Mavic batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eInput voltage AC: 100V -240V\u003c\/li\u003e\n\t\u003cli\u003eInput voltage DC: 11V - 18V\u003c\/li\u003e\n\t\u003cli\u003eCharge power: 80W\u003c\/li\u003e\n\t\u003cli\u003eDischarge power: 10W\u003c\/li\u003e\n\t\u003cli\u003eCharge current: 0.1A - 8.0A\u003c\/li\u003e\n\t\u003cli\u003eDischarge current: 0.1A - 2.0A\u003c\/li\u003e\n\t\u003cli\u003eBalancer current: max. 300mAh\u003c\/li\u003e\n\t\u003cli\u003eCell count: LiPo\/LiFe\/LiIon\/LiHV 1S - 6S\u003c\/li\u003e\n\t\u003cli\u003eCell count: NiMH\/NiCd 1 - 15\u003c\/li\u003e\n\t\u003cli\u003ePb battery voltage: 2V - 20V\u003c\/li\u003e\n\t\u003cli\u003eWeight: 390g\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 135x110x60mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of Delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1x e680 charger\u003c\/li\u003e\n\t\u003cli\u003e1x power cable\u003c\/li\u003e\n\t\u003cli\u003e1x XT60 charging cable\u003c\/li\u003e\n\t\u003cli\u003e1x DC input connection cable\u003c\/li\u003e\n\t\u003cli\u003e1x XH balancer board\u003c\/li\u003e\n\t\u003cli\u003e1x manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SkyRC","offers":[{"title":"Default Title","offer_id":53447396917591,"sku":"RO-SK100149","price":42.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RO-SK100149_b1.jpg?v=1779995337"},{"product_id":"skyrc-d260-ac-dc-ladegerat-lipo-1-6s-14a-260w-sk100157","title":"SkyRC D260 AC\/DC Charger LiPo 1-6s 14A 260W, # SK100157","description":"\u003ch1\u003eSkyRC D260 AC\/DC Charger LiPo 1-6s 14A 260W # SK100157\u003c\/h1\u003e\n\n\u003cp\u003eThe SKYRC D260 charger is an AC\/DC charger that makes charging batteries easier than ever thanks to its intuitive operation. With two independent circuits, two batteries of different types can be charged simultaneously. With 130W and a maximum of 14A, the D260 becomes a fantastic solution for all RC drivers. The device is equipped with five buttons and an LCD display including backlight and offers the simplest operation even for beginners. Just as professionals are used to from previous models.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cu\u003eFeatures:\u003c\/u\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTwo separate charging channels with max. 130W per channel (260W total)\u003c\/li\u003e\n\t\u003cli\u003eUser-friendly and simple menu navigation\u003c\/li\u003e\n\t\u003cli\u003eMicro-USB socket for firmware upgrade\u003c\/li\u003e\n\t\u003cli\u003eCharge, discharge, and storage charge\u003c\/li\u003e\n\t\u003cli\u003eDisplay of individual cell voltage, total voltage, capacity, operating temperature, charging time, etc.\u003c\/li\u003e\n\t\u003cli\u003eMany different charging programs, including a special one for perfect long-term battery storage.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for various battery types (LiPo, LiFe, LiIon, LiHV, NiCd, NiMH, PB).\u003c\/li\u003e\n\t\u003cli\u003eProfile memory for 10 charge or discharge data each.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cu\u003eTechnical Data:\u003c\/u\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eInput voltage DC: 11-18V\u003c\/li\u003e\n\t\u003cli\u003eInput voltage AC: 100-240V\u003c\/li\u003e\n\t\u003cli\u003eMax. charging power: 2x 130W\u003c\/li\u003e\n\t\u003cli\u003eMax. discharge power: 2x 10W\u003c\/li\u003e\n\t\u003cli\u003eCharging current: 2x 0.1-14.0A\u003c\/li\u003e\n\t\u003cli\u003eDischarge current: 2x 0.1-2.0A\u003c\/li\u003e\n\t\u003cli\u003eMax. balancer compensation current: 500mA\/cell\u003c\/li\u003e\n\t\u003cli\u003ePower supply output voltage: 5-25V \/ 2x 130W\u003c\/li\u003e\n\t\u003cli\u003eCell count (LiPo\/LiIon\/LiFe\/LiHV): 1-6 cells\u003c\/li\u003e\n\t\u003cli\u003eCell count (NiMH \/ NiCd): 1-15 cells\u003c\/li\u003e\n\t\u003cli\u003ePb battery voltage: 2-20V\u003c\/li\u003e\n\t\u003cli\u003eWeight: 896g\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 160x150x71mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cu\u003eScope of delivery:\u003c\/u\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1x SKYRC D260 charger\u003c\/li\u003e\n\t\u003cli\u003e2x charging cables\u003c\/li\u003e\n\t\u003cli\u003e1x power cable\u003c\/li\u003e\n\t\u003cli\u003e1x instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SkyRC","offers":[{"title":"Default Title","offer_id":53447397114199,"sku":"RO-SK100157","price":107.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RO-SK100157_b1_d439da33-33f1-4d97-8d90-46be3041d822.jpg?v=1779816825"},{"product_id":"skyrc-d200-neo-1-6-lipo-20a-12-220v-200w-nfc-sk100196-06","title":"SkyRC D200 Neo+, 1-6 LiPo, 20A, 12 - 220V, 200W, NFC, # SK100196-06","description":"\u003ch1\u003eSkyRC D200 Neo+, 1-6 LiPo, 20A, 12 - 220V 200W, # SK100196-06\u003c\/h1\u003e\n\n\u003cp\u003eThe D200 neo+ AC\/DC multi-function charger is the updated version of the D200. Specifically designed for model aircraft, it offers two separate charging interfaces and supports most battery types used in the RC industry.\u003c\/p\u003e\n\n\u003cp\u003eDue to the two independent inputs, the charger can be used for a wide range of charging situations. It also features a particularly user-friendly interface and powerful functions directly adopted from the T1000. For example, the BD350 discharge unit can be connected to significantly increase discharge performance. The new appearance and improved scroll button control make charging more convenient and easier all around. Of course, the D200 neo+ also features \"SkyCharger\" app control and an interface for the Charger Master software for Windows\/Mac OS. This means more freedom in programming and detailed information during charging and discharging.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e200W AC charging power\u003c\/li\u003e\n\t\u003cli\u003e800W DC charging power\u003c\/li\u003e\n\t\u003cli\u003eControl via scroll wheel button\u003c\/li\u003e\n\t\u003cli\u003eLightweight and compact\u003c\/li\u003e\n\t\u003cli\u003eWith PD\/QC3.0 fast charging\u003c\/li\u003e\n\t\u003cli\u003eCompatible with SkyCharger App and Charger Master\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1x D200 NEO charger\u003c\/li\u003e\n\t\u003cli\u003e1x Manual\u003c\/li\u003e\n\t\u003cli\u003e1x Power cable\u003c\/li\u003e\n\t\u003cli\u003e3x NFC tags\u003c\/li\u003e\n\t\u003cli\u003e12x QR codes         \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SkyRC","offers":[{"title":"Default Title","offer_id":53447397769559,"sku":"RO-SK100196-06","price":117.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RO-SK100196-06_b1_df80f5f6-c0f3-4e6b-8f51-44969ef5b938.jpg?v=1780388085"},{"product_id":"skyrc-q200-neo-1-6-lipo-10a-10-220v-200w-sk100197-01","title":"SkyRC Q200 Neo, 1-6 LiPo, 10A, 10 - 220V, 200W, # SK100197-01","description":"\u003ch1\u003eSkyRC Q200 Neo, 1-6 LiPo, 10A, 10 - 220V, 200W # SK100197-01\u003c\/h1\u003e\n\n\u003cp\u003eLike its predecessor, the Q200neo offers quadruple power with astonishing strength and precision. To achieve this, the modern and indigo-colored housing contains high-quality components that allow for a DC charging power of up to 400W - distributed among the four channels of the charger, of course. This translates to 100W per channel to charge lithium, nickel, and lead-acid batteries completely independently. In AC operation, the Q200neo can still deliver an impressive 200W total output.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to the many different charging modes for various battery types, this charger is also capable of safely and quickly discharging batteries. Gone are the days of discharging batteries overnight, as the 25W discharge power reduces the time needed from around 6.5 hours to an average of 1.5 hours. This is only possible because the discharge power itself is more than twice as good as with the classic Q200.\u003cbr\u003e\nAnd to make this technology as easy to use as possible, the Q200neo uses the same new operating system as other current SkyRC chargers. Large icons, different colors, and clear fonts - these and other visual features make using this charger easy to understand. Those who still prefer computer control will get their money's worth with the free \"Charger Master\" software. And even via smartphone, the Q200neo can be conveniently remotely controlled thanks to built-in Bluetooth and the app \"\".\u003c\/p\u003e\n\n\u003cp\u003eWhether you are an experienced professional or a passionate hobbyist, the Q200neo ensures that your batteries are always ready for exciting RC adventures. Say goodbye to unnecessary downtime and unlock boundless potential with the SkyRC Q200neo charger!\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMuch more powerful than the Q200\u003c\/li\u003e\n\t\u003cli\u003eLarge LCD color display\u003c\/li\u003e\n\t\u003cli\u003eRe-peak Mode for NiMH\/NiCd batteries\u003c\/li\u003e\n\t\u003cli\u003eAlso ideal for monitoring and measuring batteries\u003c\/li\u003e\n\t\u003cli\u003ePC Communication: USB port for PC operation \u0026amp; firmware upgrade\u003c\/li\u003e\n\t\u003cli\u003eSmart Phone operation \u0026amp; display with built-in Bluetooth module\u003c\/li\u003e\n\t\u003cli\u003eWith the optionally available PD3.0, additional smartphones\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eSoftware\u003cb\u003e:\u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCharge Master Software (PC)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SkyRC","offers":[{"title":"Default Title","offer_id":53447398031703,"sku":"RO-SK100197-01","price":130.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RO-SK100197-01_b1_90e1dde8-1a75-49a9-bfbc-f9ee01571fc6.jpg?v=1779933792"},{"product_id":"skyrc-b6ac-neo-1-6-lipo-10a-200w-12-oder-220v-sk100200-1","title":"SkyRC B6AC Neo, 1-6 LiPo, 10A, 200W, 12 or 220V, # SK100200-1","description":"\u003ch1\u003eSkyRC B6AC Neo, 1-6 LiPo, 10A, 200W, 12 or 220V, # SK100200-1\u003c\/h1\u003e\n\n\u003cp\u003eExternally a beauty and internally a real beast - that's the B6AC neo. A truly compact yet extremely powerful charger that incorporates the basic functions of the original B6AC V2. An impressive charging power of up to 200W DC or 60W AC is packed into this small housing, and thanks to various connections such as XT60 and USB Type-C, this charger is almost universally applicable.\u003c\/p\u003e\n\n\u003cp\u003eWhat exactly makes the B6AC neo better than its predecessor? In direct figures, the charge and discharge power has been increased by many times. This, of course, saves a lot of time, and the new color display and new software, which is standard for neo chargers, also give the charger a modern touch. Even for digital power supply, the small pocket-sized device can easily keep up. All it takes is a few clicks in the menu and you're good to go. It offers an optimal voltage of 2-27V and adjustable current flow of 1-10A.\u003c\/p\u003e\n\n\u003cp\u003eThe B6AC neo also uses a proprietary rectifier circuit to efficiently convert AC to safe DC for charging a battery. And the integrated MCU precisely controls the charging process to minimize power loss. The gallium nitride built into the device also ensures consistent performance while providing better heat dissipation and lower energy loss compared to silicon.\u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003eFeatures:\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e60W AC charging power\u003c\/li\u003e\n\t\u003cli\u003e200W DC charging power\u003c\/li\u003e\n\t\u003cli\u003eWith 1.77'' color display\u003c\/li\u003e\n\t\u003cli\u003eIncreased efficiency through the use of gallium nitride (GaN) instead of conventional silicon\u003c\/li\u003e\n\t\u003cli\u003eSmall size - ideal for any pocket\u003c\/li\u003e\n\t\u003cli\u003eVersatile thanks to XT60 and USB Type-C ports\u003c\/li\u003e\n\t\u003cli\u003eIncludes balancer connection for stronger discharge\u003c\/li\u003e\n\t\u003cli\u003eIntegrated battery tester program\u003c\/li\u003e\n\t\u003cli\u003eWith PD\/QC3.0 fast charging\u003c\/li\u003e\n\t\u003cli\u003eCompatible with Charger Master software\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cu\u003eScope of delivery:\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1x B6AC NEO charger\u003c\/li\u003e\n\t\u003cli\u003e1x manual\u003c\/li\u003e\n\t\u003cli\u003e1x power cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SkyRC","offers":[{"title":"Default Title","offer_id":53447398392151,"sku":"RO-SK100200-01","price":49.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RO-SK100200-01_b1.jpg?v=1779933825"},{"product_id":"toolkitrc-m6d-2x-1-6s-lipo-lader-bis-500w-ladeleistung-dc-7-28v","title":"ToolkitRC M6D, 2x 1-6S LiPo Charger, up to 500W Charging Power, DC 7-28V","description":"ToolkitRC M6D, 1-6S LiPo Charger, up to 500W Charging Power, DC 7-28V \u003cp\u003e The M6D charger is smaller, lighter, and almost as powerful as the M6DAC charger. With the two available charging channels and helpful functions for discharging, cyclic charging, and general settings, you can hardly go wrong with this smart dual device. Due to its special design, the charger is even able to charge two batteries synchronously or asynchronously.\u003cbr\u003eThe synchronous charging process charges 2 identical batteries (same charge level and capacity) synchronously with up to 25A (500 watts). Different batteries are charged asynchronously with up to 15A (250) each. \u003c\/p\u003e \u003cp\u003e \u003cb\u003eFeatures:\u003c\/b\u003e \u003c\/p\u003e \u003cul\u003e \u003cli\u003e Up to 500W charging power and a maximum of 25A charging current in synchronous mode \u003c\/li\u003e \u003cli\u003eMax. 250W discharge power and a maximum of 15A\u003c\/li\u003e \u003cli\u003eOperation via DC input (7-28V) \u003c\/li\u003e \u003cli\u003eEasy operation with scroll wheel and one button\u003c\/li\u003e \u003cli\u003eMultilingual user interface including voice output\u003c\/li\u003e \u003cli\u003eUpgradable via USB\u003c\/li\u003e \u003cli\u003eVarious safety monitoring functions\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003ca href=\"Elektroaltgeraeteentsorgung.htm?shop=hoellein\u0026amp;SessionId=\u0026amp;a=catalog\u0026amp;t=1084\u0026amp;c=1084\u0026amp;p=1084\" rel=\"nofollow\"\u003e\u003c\/a\u003e \u003c\/p\u003e","brand":"ToolkitRC","offers":[{"title":"Default Title","offer_id":53447399539031,"sku":"RO-TK10800","price":58.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RO-TK10800_b1.jpg?v=1779933854"},{"product_id":"toolkitrc-m7-lipo-1-6s-10a-ladegerat-dc-7-28v","title":"ToolkitRC M7 LiPo 1-6S, 10A, Charger DC 7-28V","description":"ToolkitRC M7 LiPo 1-6S, 10A, Charger DC 7-28V \u003cp\u003e The M7 charger is smaller, lighter, and almost as powerful as the M7AC charger. It offers a variety of functions, such as balance charging and discharging. It can also be used as a signal meter or directly as a signal source for PWM, PPM, and SBUS signals. \u003c\/p\u003e \u003cp\u003e \u003cb\u003eFeatures: \u003c\/b\u003e\u003c\/p\u003e\u003cb\u003e \u003cul\u003e \u003cli\u003eUp to 200W charging power and a maximum of 15A charging current\u003c\/li\u003e \u003cli\u003eMax. 250W discharge power (with external load)\u003c\/li\u003e \u003cli\u003e Multifunction device \u003cul\u003e \u003cli\u003eCharger\u003c\/li\u003e \u003cli\u003e Meter for voltage, resistance, PWM\/PPM\/SBUS signals \u003c\/li\u003e \u003cli\u003ePlayback of PWM\/PPM\/SBUS signals\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003eMultilingual user interface including voice output\u003c\/li\u003e \u003cli\u003eUpgradable via USB\u003c\/li\u003e \u003cli\u003eVarious safety monitoring features\u003c\/li\u003e \u003c\/ul\u003e \u003c\/b\u003e\u003cp\u003e \u003cb\u003eTechnical Data:\u003c\/b\u003e \u003c\/p\u003e Input voltage: DC 7-28V, max. 12A Charging current: 0.1-10A, 200W Discharge current: 0.1-10A, 250W (Rec\/Ext. Mode)\u003cbr\u003e0.1-3A, 12W (Int. Mode) Charging accuracy: \u0026lt;0.005V USB: 2.1A, 5V (or Upgrade) Balancer current: 400mA, 2-6S Cell count: LiPo\/LiFe\/LiIon\/LiHV 1-6S Cell count: NiMH\/NiCd 1-16S Pb battery voltage: 1-10S Voltage: 1.0V-5.0V, 1-6S Display: IPS 2.0'' 320x240px LCD Dimensions: 73x51x27mm Weight: 90g \u003cp\u003e \u003ca href=\"Elektroaltgeraeteentsorgung.htm?shop=hoellein\u0026amp;SessionId=\u0026amp;a=catalog\u0026amp;t=1084\u0026amp;c=1084\u0026amp;p=1084\" rel=\"nofollow\"\u003e\u003c\/a\u003e \u003c\/p\u003e","brand":"ToolkitRC","offers":[{"title":"Default Title","offer_id":53447399735639,"sku":"RO-TK11400","price":41.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RO-TK11400_b1_69901671-f430-483d-b04e-c81f1515e557.jpg?v=1780604892"},{"product_id":"toolkitrc-m6dac-2x-1-6s-lipo-lader-max-700w-ac-dc","title":"ToolkitRC M6DAC, 2x 1-6S LiPo Charger, max. 700W, AC\/DC","description":" ToolkitRC M6DAC LiPo 1-6S 15A 2 Channel Charger AC\/DC\n\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003e The M6DAC is a two-channel charger with some useful functions for discharging, cyclic charging, and general settings. Thanks to its special design, the charger is able to not only simply supply two batteries with new energy. This charging process can take place synchronously as well as asynchronously with the M6DAC, and that's precisely what makes this charger so versatile. \u003c\/p\u003e \u003cp\u003e Synchronous charging charges 2 identical batteries (same charge level and capacity) synchronously with up to 25A (700 W). Different batteries are charged asynchronously with up to 15A (350W) each. \u003c\/p\u003e \u003cp\u003e Additionally, enjoy short charging times for many mobile devices such as smartphones, tablets, and laptops thanks to the 65-watt USB-C fast charging output. \u003c\/p\u003e \u003cp\u003e \u003cb\u003eFeatures:\u003c\/b\u003e \u003c\/p\u003e \u003cul\u003e \u003cli\u003e Up to 700W charging power and a maximum of 25A charging current in synchronous mode \u003c\/li\u003e \u003cli\u003eDischarge: 0.1-3A, 15W x2 (Normal Mode) \/ 0.1-15A, 350W x2 (Recycle Mode)\u003c\/li\u003e \u003cli\u003eIncludes DC (7-28V) and AC (100-240V) input \u003c\/li\u003e \u003cli\u003eEasy operation with scroll wheel and a button\u003c\/li\u003e \u003cli\u003eMultilingual user interface including voice output\u003c\/li\u003e \u003cli\u003eUpgradable via USB\u003c\/li\u003e \u003cli\u003eVarious safety monitoring features\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003c\/p\u003e \u003cp\u003e \u003ca href=\"Elektroaltgeraeteentsorgung.htm?shop=hoellein\u0026amp;SessionId=\u0026amp;a=catalog\u0026amp;t=1084\u0026amp;c=1084\u0026amp;p=1084\" rel=\"nofollow\"\u003e\u003c\/a\u003e \u003c\/p\u003e","brand":"ToolkitRC","offers":[{"title":"Default Title","offer_id":53447399866711,"sku":"RO-TK11500","price":114.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RO-TK11500_b1_c418536c-803f-4feb-b61e-c07db1768075.jpg?v=1779816949"},{"product_id":"toolkitrc-m9-1-8s-lipo-ladegerat-dc-7-35v-max-20a-ladestrom","title":"ToolkitRC M9, 1-8S LiPo Charger, DC 7-35V, max. 20A Charging Current","description":"ToolkitRC M9, 1-8S LiPo Charger, DC 7-35V, max. 20A Charging Current Extreme performance, unparalleled design, and numerous customization options are the highlights of the M9 charger. And the foldable color display ensures the necessary comfort and clear visibility even in bright sunshine. \u003cbr\u003eUp to 600W of charging power is possible with the M9, making it easy to charge 2-8S LiPo batteries and up to 20S NiMH batteries. Even mobile devices like smartphones, MP3 players, etc., can be recharged with 65W via the USB Type-A and Type-C outputs. \u003cbr\u003eBut the M9 is not just for charging; it also features several additional programs designed to simplify RC everyday life. Balancer Charger, Watt Measurement, Signal Source, and DC Output are all combined in this handy device. \u003cp\u003e \u003c\/p\u003e \u003cp\u003e \u003cb\u003eFeatures: \u003c\/b\u003e\u003c\/p\u003e\u003cb\u003e \u003cul\u003e \u003cli\u003eMax. 600W DC charging power and maximum 20A charging current\u003c\/li\u003e \u003cli\u003eCompact design - ideal for on the go\u003c\/li\u003e \u003cli\u003e High-contrast LCD color display that can be angled up to 80° \u003c\/li\u003e \u003cli\u003e Customizable home screen and voice prompts \u003c\/li\u003e \u003cli\u003e Serves as a signal source and tester (PWM, PPM, SBUS)\u003c\/li\u003e \u003c\/ul\u003e \u003c\/b\u003e\u003cp\u003e \u003ca href=\"Elektroaltgeraeteentsorgung.htm?shop=hoellein\u0026amp;SessionId=\u0026amp;a=catalog\u0026amp;t=1084\u0026amp;c=1084\u0026amp;p=1084\" rel=\"nofollow\"\u003e\u003c\/a\u003e \u003c\/p\u003e","brand":"ToolkitRC","offers":[{"title":"Default Title","offer_id":53447399899479,"sku":"RO-TK11900","price":71.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RO-TK11900_b1.jpg?v=1779933891"},{"product_id":"toolkitrc-q4ac-1-4s-lipo-5a-4-kanal-ladegerat-ac-dc-tk12000","title":"ToolkitRC Q4AC, 1-4S LiPo, 5A, 4-Channel Charger AC\/DC, # TK12000","description":"\u003cp\u003e\u003cb\u003eToolkitRC Q4AC, 1 - 4S LiPo, 5A, \u003cbr\u003e4 Channel Charger AC\/DC, # TK12000\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003eThe Q4AC is a four-channel charger with up to 50W charging power, also equipped with a balancer function and IPS display. The menu navigation via the roller makes operation simple and straightforward.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMax. 50W charging power on all four channels and max. 5A charging current\u003c\/li\u003e \u003cli\u003eMax. 5W discharge power per channel at approx. 2A\u003c\/li\u003e \u003cli\u003eAdjustable cut-off voltage for lithium batteries\u003c\/li\u003e \u003cli\u003eStore 5 battery information and 3 power supply information for faster handling\u003c\/li\u003e \u003cli\u003eMultilingual user interface\u003c\/li\u003e \u003cli\u003eFirmware upgrade via USB\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003e1x Q4AC charger\u003cbr\u003e1x power cable\u003cbr\u003e1x USB cable\u003cbr\u003e1x display protective film\u003cbr\u003e1x manual\u003c\/p\u003e \u003cp\u003e \u003ca href=\"Elektroaltgeraeteentsorgung.htm?shop=hoellein\u0026amp;SessionId=\u0026amp;a=catalog\u0026amp;t=1084\u0026amp;c=1084\u0026amp;p=1084\" rel=\"nofollow\"\u003e\u003c\/a\u003e \u003c\/p\u003e","brand":"ToolkitRC","offers":[{"title":"Default Title","offer_id":53447401111895,"sku":"RO-TK12000","price":81.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/RO-TK12000_b1_d2e8c2ef-25df-4d52-93b7-16e9b64b6431.jpg?v=1779961123"},{"product_id":"isdt-f160-4-fach-ladegerat-0-2-5a-4-x-40w-4x-4s-lipo-230v","title":"ISDT F160, 4-channel charger, 0.2 - 5A, 4 x 40W, 4x 4S LiPo, 230V","description":"\u003ch1 style=\"text-align: center;\"\u003eISDT F160, 4-Channel Charger 0.2 - 5A, 4 x 40W, 4x 4S LiPo, 230V\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eATTENTION: The charger is currently only available in English! If you do not speak English, please refrain from purchasing!\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe new F160 from iSDT is a very compact charger with an integrated power supply for 230V AC connection with the latest GaN technology.\u003cbr\u003e\nIt is the ideal charger for the indoor season or for charging up to 4 receiver, flight or drive batteries simultaneously with just one device.\u003cbr\u003e\nIt can charge 4x 1-4s LiXx batteries with a charging current of 0.1 to max. 5A. The maximum power is 40W per output.\u003cbr\u003e\nThe integrated balancer provides 500mA per cell.\u003cbr\u003e\nThe F160 offers 3 charging modes: Charge, Discharge \u0026 Storage.\u003cbr\u003e\nOperation is via the buttons on the charger itself using 5 pre-made charging programs. All settings can be conveniently adjusted via the iSD Link app on your smartphone.\u003c\/p\u003e\n\n\u003ch4\u003eProduct features:\u003c\/h4\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCompact 4-channel charger for 4x 1-4s LiXx\u003c\/li\u003e\n\t\u003cli\u003eLatest GaN (Gallium Nitride) Technology with 160W 230V power supply integrated\u003c\/li\u003e\n\t\u003cli\u003eEasy operation and connection via iSD Link APP\u003c\/li\u003e\n\t\u003cli\u003e4x 1-4s LiXx with 40W per output (LiFe, LiPo, LiHv, PB \u0026 NiMh\u003c\/li\u003e\n\t\u003cli\u003eMax charging current from 0.2-5A, balancer power up to 0.5A per cell\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53449204400471,"sku":"RC-F160","price":79.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/ISDT-F160-4-Fach-Ladegeraet-0-2-5A-4-x-40W-4x-4S-LiPo-230V-RC-F160_b_0.jpg?v=1779820117"},{"product_id":"isdt-x16-smart-dual-channel-ladegerat-2-1100w-hochleistungs-lipo-charger","title":"ISDT X16 Smart Dual Channel Charger – 2×1100W High-Power Lipo Charger","description":"\u003ch1 style=\"text-align: center;\"\u003eISDT X16 Smart Dual Channel Charger – 2×1100W High-Power LiPo Charger\u003c\/h1\u003e\n\n\u003cp\u003eThe ISDT X16 is a powerful dual-channel smart charger for demanding RC pilots, racers, and model builders. With up to 1100W charging power per channel and support for 2–16S lithium batteries, the X16 offers maximum performance for fast, safe, and precise charging.\u003c\/p\u003e\n\n\u003cp\u003eThanks to the two completely independent charging channels, two batteries can be charged simultaneously – ideal for use with RC cars, drones, model aircraft, or boats. The integrated high-performance power supply supports AC input from 100–240V, so the charger can be used worldwide.\u003c\/p\u003e\n\n\u003cp\u003eThe large 2.8-inch IPS display with a wide viewing angle clearly shows all important information such as voltage, current, capacity, and charging time. Additionally, the Bluetooth connection allows control via the ISDT app – including charging profiles, parameter monitoring, and convenient one-key charging. With extensive safety features such as over-temperature, short-circuit, over-voltage, and overload protection, the ISDT X16 ensures safe operation and maximum battery life at all times.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eHighlights:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDual-channel charger with 2×1100W power, up to 20A charging current per channel\u003c\/li\u003e\n\t\u003cli\u003eSupports LiPo, LiHV, LiFe, ULiHV, and other battery types (2–16S)\u003c\/li\u003e\n\t\u003cli\u003e2.8″ IPS color display with high readability\u003c\/li\u003e\n\t\u003cli\u003eBluetooth app control with charging profiles\u003c\/li\u003e\n\t\u003cli\u003eParallel and balance charging function\u003c\/li\u003e\n\t\u003cli\u003eIntegrated AC power supply (100–240V)\u003c\/li\u003e\n\t\u003cli\u003eExtensive safety and protection functions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eATTENTION: The charger only has an 18-pin connector on the balancer; an adapter is necessary for common modeling batteries with XH connectors! (CNV1612)\u003c\/b\u003e\u003c\/p\u003e","brand":"ISDT","offers":[{"title":"Default Title","offer_id":53449269674327,"sku":"RC-X16","price":579.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/16S-2_052c6d11-340e-4974-91f4-3dbe83d7e294.jpg?v=1779915460"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/collections\/ladegeraete.jpg?v=1770975264","url":"https:\/\/hoelleinshop.com\/en\/collections\/akkus-lader-lader-nimh.oembed","provider":"hoelleinshop","version":"1.0","type":"link"}