{"title":"Other Sensors \u0026 Accessories","description":"","products":[{"product_id":"general-air-modul-fur-2-6s-mit-vario-graupner-hott-2-4ghz-d-power-33611","title":"General Air Module for 2-6S, with Vario, Graupner HoTT 2.4GHz, D-Power # 33611","description":"\u003ch1 style=\"text-align: center;\"\u003eGeneral Air Module 2-6S, with Vario, HoTT 2.4GHz System\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eProduct Information:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe General Air Module is a universal sensor for Graupner HoTT receivers and models with internal combustion or electric motors.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFunctions:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eVario with altitude signals and climb and sink signals, and additional warning thresholds for min. altitude, max. altitude, climb and sink rate in two stages, altitude display (- 500 ... 3000 m), and storage of min. and max. altitude.\u003c\/li\u003e\n\t\u003cli\u003e2 x temperature and voltage measurements with warning thresholds for min. and max. voltage and min. and max. temperature.\u003c\/li\u003e\n\t\u003cli\u003eSingle cell measurement with warning thresholds for min. voltage.\u003c\/li\u003e\n\t\u003cli\u003eVoltage, current, and capacity measurement with warning thresholds for min. and max. voltage, max. capacity, and max. current.\u003c\/li\u003e\n\t\u003cli\u003eRPM measurement with RPM control (programmable) and warning thresholds for min. and max. RPM.\u003c\/li\u003e\n\t\u003cli\u003eFuel measurement with warning thresholds in 25% increments. Adjustable warning time: OFF, 5, 10, 15, 20, 25, 30 seconds, always.\u003c\/li\u003e\n\t\u003cli\u003eAdjustable warning repeat time: Always, 1, 2, 3, 4, 5 min, once.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eConnections: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e2 x temperature optionally 0 to 120°C or 200°C and voltage measurement up to 80V DC.\u003c\/li\u003e\n\t\u003cli\u003e1 x RPM measurement up to 100,000 rpm with two-blade propeller.\u003c\/li\u003e\n\t\u003cli\u003e1 x speed controller\/servo input.\u003c\/li\u003e\n\t\u003cli\u003e1 x RPM control input.\u003c\/li\u003e\n\t\u003cli\u003e1 x speed controller\/servo output for RPM control.\u003c\/li\u003e\n\t\u003cli\u003e1 x current, voltage, and capacity measurement up to 40A (pulse up to 60A) and up to 30V.\u003c\/li\u003e\n\t\u003cli\u003e1 x single cell monitoring for 2-6S lithium batteries (LiPo, LiIo, LiFe).\u003c\/li\u003e\n\t\u003cli\u003e1 x receiver power supply input and output.\u003c\/li\u003e\n\t\u003cli\u003e1 x telemetry connection for receiver.\u003c\/li\u003e\n\t\u003cli\u003e1 x fuel sensor 0% - 25% - 50% - 75% - 100%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data General Air Module HoTT:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eWeight approx. 31g\u003c\/li\u003e\n\t\u003cli\u003eDimensions approx. 41 (48) x 44 (56) x 16mm\u003c\/li\u003e\n\t\u003cli\u003eOperating voltage: 3.6 ... 8.4V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eImportant warning notice when using modules 33600, 33601, 33610, 33611 and 33620:\u003c\/b\u003e\u003cbr\u003e\nDo not make any programming changes to the sensors during flight, to prevent your model from losing control due to carelessness!\u003cbr\u003e\nWhen using two or more receivers in the model, you must under no circumstances make any programming changes during flight, as this can lead to incorrect settings in receivers without connected telemetry, and in the worst case, to the crash of the model! Therefore, always program on the ground and ensure that only the receiver to be programmed with the connected sensor is switched on.\u003c\/p\u003e","brand":"Graupner Co., Ltd","offers":[{"title":"Default Title","offer_id":53440114065751,"sku":"DP33611","price":83.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/DP33611_b1.jpg?v=1779788282"},{"product_id":"temperatursensor-200-c-mit-spannungssensor-80v-graupner-hott-2-4ghz-33613","title":"Temperature sensor 200°C with voltage sensor 80V, Graupner HoTT 2.4GHz, # 33613","description":"","brand":"Graupner Co., Ltd","offers":[{"title":"Default Title","offer_id":53440118849879,"sku":"DP33613","price":20.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/DP33613_b1.jpg?v=1779788290"},{"product_id":"magnet-sensor-zur-drehzahlmessung-rpm-sensor-graupner-hott-2-4ghz-33616","title":"Magnetic Sensor for RPM Measurement (RPM Sensor) Graupner HoTT 2.4GHz, # 33616","description":"\u003ch1 style=\"text-align: center;\"\u003eMagnetic Sensor for RPM Measurement (RPM Sensor)\u003cbr\u003e\n Graupner HoTT \u003cb\u003e \u003c\/b\u003e\n\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003e Product Information:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eRPM measurement up to 100,000 rpm with two-bladed propeller\u003c\/p\u003e\n\n\u003cp\u003eNote: The sensor only works with:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e#33610 General Engine Module 2-6S\u003c\/li\u003e\n\t\u003cli\u003e#33611 General Air Module 2-6S, Vario Graupner HoTT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Graupner Co., Ltd","offers":[{"title":"Default Title","offer_id":53440119144791,"sku":"DP33616","price":19.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/DP33616_b1.jpg?v=1779788300"},{"product_id":"voltage-module-einzelspannungssensor-fur-2-4s-eh-anschluss-d-power-33630","title":"Voltage Module (Single Voltage Sensor) for 2-4S, EH Connector, D-Power # 33630","description":"\u003ch1\u003eVoltage Module (Single Voltage Sensor) for 2-4S, EH Connector, D-Power # 33630\u003c\/h1\u003e\n\n\u003cp\u003eThe Voltage Module 2-4 S is used for simple monitoring of a 2 to 4 cell (7.4 - 14.8 V C) LiXX battery via Graupner HoTT telemetry. The battery is connected to the module via the balancer connector. The cell voltage is permanently monitored, and the programmable audible voltage alarm provides the user with a reliable warning of undervoltage.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eAvailable information and settings:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery voltage (total – individual cells)\u003c\/li\u003e\n\t\u003cli\u003eMinimum cell voltage adjustable\u003c\/li\u003e\n\t\u003cli\u003eVoltage calibratable\u003c\/li\u003e\n\t\u003cli\u003eWarning duration adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe user updateability always keeps the Voltage Module up to date and ensures the expansion with future functions or languages. The necessary programs and files can be found under \"Download\" for the respective products on www.graupner.de.\u003c\/p\u003e","brand":"Graupner Co., Ltd","offers":[{"title":"Default Title","offer_id":53440119177559,"sku":"DP33630","price":15.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/DP33630_b1_e65b7dd3-3471-4cab-856c-13ce979c87bd.jpg?v=1779920471"},{"product_id":"voltage-module-einzelspannungssensor-fur-2-4s-xh-anschluss-d-power-33631","title":"Voltage Module (Single Voltage Sensor) for 2-4S, XH Connector, D-Power # 33631","description":"\u003ch1 style=\"text-align: center;\"\u003eVoltage Module (Single Voltage Sensor) for 2-4S, XH Connector, D-Power# 33631\u003c\/h1\u003e\n\n\u003cp\u003eThe 2-4S Voltage Module is used for easy monitoring of a 2 to 4 cell (7.4 - 14.8 V C) LiXX battery via Graupner HoTT telemetry. The battery is connected to the module via the balancer plug. The cell voltage is continuously monitored, and the programmable audible voltage alarm provides the user with a reliable warning of undervoltage.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eAvailable information and settings:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery voltage (total – individual cells)\u003c\/li\u003e\n\t\u003cli\u003eMinimum cell voltage adjustable\u003c\/li\u003e\n\t\u003cli\u003eVoltage calibratable\u003c\/li\u003e\n\t\u003cli\u003eWarning duration adjustable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Graupner Co., Ltd","offers":[{"title":"Default Title","offer_id":53440119243095,"sku":"DP33631","price":15.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/DP33631_b1_b1478d66-bd2a-480d-865f-4f9bba71e2d8.jpg?v=1779896981"},{"product_id":"usb-schnittstelle-fur-graupner-gm-genius-d-power-7168-6","title":"USB interface for Graupner\/GM-GENIUS, D-Power # 7168.6","description":"","brand":"Graupner Co., Ltd","offers":[{"title":"Default Title","offer_id":53440127631703,"sku":"DP7168.6","price":26.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/DP7168.6_b1.jpg?v=1779788470"},{"product_id":"durchflussmesser-mflow2-turbine-3000-jeti-duplex-2-4ex-hacker-80001323","title":"Flow Meter MFlow2 Turbine 3000, Jeti DUPLEX 2.4EX, Hacker # 80001323","description":"\u003ch1 style=\"text-align: center;\"\u003eFlow Meter MFlow2 Turbine 3000, Jeti DUPLEX 2.4EX\u003cbr\u003e\nHacker # 80001323\u003c\/h1\u003e\n\n\u003cp\u003eThis telemetry sensor measures the flow of jet fuel from the tank to large turbines and can thus reliably display the tank level.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\nThe \u003cb\u003eMFlow2-T3000-Turbine\u003c\/b\u003e is suitable for models with turbine propulsion.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe sensor is compatible with the Duplex \u003cb\u003eEX-Bus System\u003c\/b\u003e\u003c\/li\u003e\n\t\u003cli\u003eConfiguration via the device overview of the JETI DC\/DS transmitter (file \"MFLOW2.bin\" required)\u003c\/li\u003e\n\t\u003cli\u003eSelectable switch\/button on the DC\/DS transmitter to clear average and maximum values.\u003c\/li\u003e\n\t\u003cli\u003eEX Telemetry Values: Current flow and tank level\u003c\/li\u003e\n\t\u003cli\u003eUser-adjustable parameters, such as tank volume, alarm for minimum level\u003c\/li\u003e\n\t\u003cli\u003eFirmware update via JETI USBa\u003c\/li\u003e\n\t\u003cli\u003eCalibration of the sensor specifically for turbine fuel\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data MFlow2-T3000:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMeasurement range [ml\/min]: 50-3000\u003c\/li\u003e\n\t\u003cli\u003eMeasurement tolerance [%]: ±2\u003c\/li\u003e\n\t\u003cli\u003eHose connection [mm]: 2x Festo 4mm\u003c\/li\u003e\n\t\u003cli\u003eDimensions [mm]: 77x41x30\u003c\/li\u003e\n\t\u003cli\u003eWeight [g]: 40\u003c\/li\u003e\n\t\u003cli\u003eVoltage range [V]: 5-8.4\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature [°C]: -20 to 80\u003c\/li\u003e\n\t\u003cli\u003eInstallation: on the \"pressure side\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JETI model, s. R. O.","offers":[{"title":"Default Title","offer_id":53441112670551,"sku":"H80001323","price":217.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/H80001323_b1.jpg?v=1779796243"},{"product_id":"mengendurchflussmesser-mflow2-gas-800-duplex-2-4ex-hacker-80001325","title":"Flow meter MFlow2 Gas 800, DUPLEX 2.4EX, Hacker # 80001325","description":"\u003ch1 style=\"text-align: center;\"\u003eFlow Meter MFlow2 Gas 800, DUPLEX 2.4EX\u003c\/h1\u003e\n\n\u003cp\u003eThis telemetry sensor measures the flow of gasoline from the tank to combustion engines and can therefore reliably display the fuel level.\u003c\/p\u003e\n\n\u003cp\u003eThe MFlow2-Gas is suitable for models with \"gasoline\" engines.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe sensor is compatible with the Duplex \u003cb\u003eEX-Bus System\u003c\/b\u003e\u003c\/li\u003e\n\t\u003cli\u003eConfiguration via the device overview of the JETI DC\/DS transmitter (\"MFLOW2.bin\" file required)\u003c\/li\u003e\n\t\u003cli\u003eSelectable switch\/button on the DC\/DS transmitter that clears the average and maximum values.\u003c\/li\u003e\n\t\u003cli\u003eEX Telemetry values: Current flow and tank level\u003c\/li\u003e\n\t\u003cli\u003eUser-adjustable parameters, such as tank volume, alarm for minimum level\u003c\/li\u003e\n\t\u003cli\u003eFirmware update via JETI USBa\u003c\/li\u003e\n\t\u003cli\u003eSensor calibrated specifically for gasoline\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cb\u003eTechnical data MFlow2-Gas:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMeasuring range [ml\/min]: 20 - 800\u003c\/li\u003e\n\t\u003cli\u003eMeasurement tolerance [%]: ±2\u003c\/li\u003e\n\t\u003cli\u003eHose connection [mm]: 2x 4mm\u003c\/li\u003e\n\t\u003cli\u003eDimensions [mm]: 77x41x30\u003c\/li\u003e\n\t\u003cli\u003eWeight [g]: 40\u003c\/li\u003e\n\t\u003cli\u003eVoltage range [V]: 5-8.4\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature [°C]: -20 to 80\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JETI model, s. R. O.","offers":[{"title":"Default Title","offer_id":53441113293143,"sku":"H80001325","price":188.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/H80001325_b1.jpg?v=1779796251"},{"product_id":"duplex-2-4ex-mrpm-hall-drehzahlmessmodul-hacker-80001327","title":"DUPLEX 2.4EX MRPM Hall RPM Sensor, Hacker # 80001327","description":"\u003ch1 style=\"text-align: center;\"\u003eDUPLEX 2.4EX MRPM Hall RPM Sensor Module\u003c\/h1\u003e\n\n\u003cp\u003eThe DUPLEX 2.4EX MRPM-Hall sensor is used for RPM measurement via Hall sensor. For this purpose, a magnet is attached to the rotating part to be measured. The Hall sensor records the RPM contact-free. It is therefore ideally suited for measurements on flywheels, gear wheels, etc.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions [mm]: 12.5x25x5.5\u003c\/li\u003e\n\t\u003cli\u003eMagnet: 3mm (diameter) x 1mm\u003c\/li\u003e\n\t\u003cli\u003eWeight with cables [g]: 5\u003c\/li\u003e\n\t\u003cli\u003eMeasurement accuracy: 10 rpm\u003c\/li\u003e\n\t\u003cli\u003eOperating temperature [°C]: -10 to +85\u003c\/li\u003e\n\t\u003cli\u003eSupply voltage [V]: 3.5 – 8.4\u003c\/li\u003e\n\t\u003cli\u003eCurrent consumption [mA]: 15\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JETI model, s. R. O.","offers":[{"title":"Default Title","offer_id":53441113915735,"sku":"H80001327","price":46.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/H80001327_b1.jpg?v=1779796270"},{"product_id":"jeti-duplex-2-4-ex-hacker-topfuel-mtag-battery-reader","title":"Jeti Duplex 2.4 EX Hacker TopFuel MTAG Battery Reader","description":"\u003ch1 style=\"text-align: center;\"\u003eJeti Duplex 2.4 EX Hacker TopFuel MTAG Battery Reader\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eProduct description and features\u003c\/b\u003e\u003cbr\u003e\nThe Duplex 2.4 EX TopFuel MTAG Battery Reader is installed in the model under the battery. Connected to the Ext. input on the receiver, this sensor sends all data stored on the MTAG chip for telemetry to the JETI Duplex transmitter or the JETIBOX.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eThe following values can be stored and displayed on the MTAG chip:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery ID\u003c\/li\u003e\n\t\u003cli\u003eCycle count\u003c\/li\u003e\n\t\u003cli\u003eCapacity\u003c\/li\u003e\n\t\u003cli\u003eNumber of cells\u003c\/li\u003e\n\t\u003cli\u003eDischarge rate\u003c\/li\u003e\n\t\u003cli\u003eStatus\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAll preset values and names are only recommendations and can be renamed, deleted, and overwritten by the user with this sensor.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eCompatible JETI Duplex Transmitters:\u003c\/b\u003e\u003cbr\u003e\nTelemetry display is possible in any JETI Duplex transmitter with the current firmware.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eJETI Duplex DS-12\u003c\/li\u003e\n\t\u003cli\u003eJETI Duplex DS\/DC-14\u003c\/li\u003e\n\t\u003cli\u003eJETI Duplex DS\/DC-16\u003c\/li\u003e\n\t\u003cli\u003eJETI Duplex DS\/DC-24\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTemperature range: -10°C to +85°C\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 53mm x 26mm x 3mm\u003c\/li\u003e\n\t\u003cli\u003eMaximum distance to the MTAG chip on the battery: 3cm\u003c\/li\u003e\n\t\u003cli\u003ePower supply:\u003c\/li\u003e\n\t\u003cli\u003eCurrent consumption: 15mA\u003c\/li\u003e\n\t\u003cli\u003eWeight: 7g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1 Duplex 2.4EX TopFuel MTAG Battery Reader\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JETI model, s. R. O.","offers":[{"title":"Default Title","offer_id":53441115324759,"sku":"H80001330","price":50.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/H80001330_b1.jpg?v=1780480147"},{"product_id":"hacker-topfuel-mtag-battery-sticker-ve-4-stuck","title":"Hacker TopFuel MTAG Battery Sticker, 4 pieces","description":"\u003ch1 style=\"text-align: center;\"\u003eHacker TopFuel MTAG Battery Sticker, PU 4 pieces\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eProduct description and features:\u003c\/b\u003e\u003cbr\u003e\nThe TopFuel MTAG Battery Sticker is self-adhesive and can be easily applied to any battery. In conjunction with the JETI Duplex MTAG Battery Reader, the battery values can be saved by the user and used in the telemetry of the JETI Duplex systems. We also offer a free LUA app, which can be found under the \"Downloads\" tab.\u003c\/p\u003e\n\n\u003cp\u003eThe following values can be stored and displayed on the TopFuel MTAG Battery Sticker:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBattery ID\u003c\/li\u003e\n\t\u003cli\u003eNumber of cycles\u003c\/li\u003e\n\t\u003cli\u003eCapacity\u003c\/li\u003e\n\t\u003cli\u003eNumber of cells\u003c\/li\u003e\n\t\u003cli\u003eDischarge rate\u003c\/li\u003e\n\t\u003cli\u003eStatus\u003c\/li\u003e\n\t\u003cli\u003eAll preset values and names are only recommendations and can be renamed, deleted and overwritten by the user.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCurrently compatible JETI Duplex transmitters\u003cbr\u003e\nTelemetry display is possible in any JETI Duplex transmitter with the current firmware.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eJETI Duplex DS-12\u003c\/li\u003e\n\t\u003cli\u003eJETI Duplex DS\/DC-14\u003c\/li\u003e\n\t\u003cli\u003eJETI Duplex DS\/DC-16\u003c\/li\u003e\n\t\u003cli\u003eJETI Duplex DS\/DC-24\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e25mm x 35mm x 1mm\u003c\/li\u003e\n\t\u003cli\u003e1.5g per sticker\u003c\/li\u003e\n\t\u003cli\u003eMaximum distance to the MTAG chip on the battery: 3cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e4 TopFuel MTAG Battery Stickers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hacker Motor GmbH","offers":[{"title":"Default Title","offer_id":53441115455831,"sku":"H80001331","price":9.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/H80001331_b1_529c0d93-0189-490d-aed7-284d0b02839d.jpg?v=1777574288"},{"product_id":"duplex-usba-adapter-hacker-80001414","title":"DUPLEX USBa adapter, Hacker # 80001414","description":"\u003ch1 style=\"text-align: center;\"\u003eDUPLEX USBa adapter, Hacker # 80001414\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eDescription: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis USB adapter can be used to update the firmware of JetiDuplex products (e.g., update to \"EX\", see also information on the Duplex main page). From the MGPS, you can directly save the stored data of the MGPS module to your computer and then visualize it in Google Maps or process it otherwise. To download the data from the MGPS, you will need additional software.\u003c\/p\u003e","brand":"JETI model, s. R. O.","offers":[{"title":"Default Title","offer_id":53441121943895,"sku":"H80001414","price":16.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/H80001414_b1_f4e37160-f8aa-406c-94d5-ffaa9cdf20a2.jpg?v=1780826616"},{"product_id":"duplex-pitot-rohr-mit-2x1m-silikonschlauch-80001415","title":"DUPLEX Pitot tube with 2x1m silicone hose, # 80001415","description":"\u003ch1 style=\"text-align: center;\"\u003eDUPLEX Pitot Tube, Hacker\/Jeti # 80001415\u003c\/h1\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eincl. 2x1m silicone tubing\u003c\/li\u003e\n\t\u003cli\u003eas a spare part for Duplex MSpeed sensor\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JETI model, s. R. O.","offers":[{"title":"Default Title","offer_id":53441122337111,"sku":"H80001415","price":19.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/H80001415_b1.jpg?v=1779796380"},{"product_id":"spektrum-flug-telemetrie-flugakkusensor-3-pin-horizon-spma9570","title":"Spectrum Flight Telemetry Flight Battery Sensor 3-pin, Horizon # SPMA9570","description":"","brand":"SPEKTRUM","offers":[{"title":"Default Title","offer_id":53441743061335,"sku":"HHSPMA9570","price":8.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/HHSPMA9570_b1_4796df3a-7f20-4f7a-9aac-e2496f1d0ec5.jpg?v=1779899781"},{"product_id":"spektrum-dsm-temperatursensor-spma9571","title":"Spektrum DSM Temperature Sensor, #SPMA9571","description":"","brand":"SPEKTRUM","offers":[{"title":"Default Title","offer_id":53441744470359,"sku":"HHSPMA9571","price":16.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/HHSPMA9571_b1.jpg?v=1779798925"},{"product_id":"telme-modul-fur-futaba-telemetrie-und-kontronik-kosmik-regler-09740","title":"TelMe Module for Futaba Telemetry and Kontronik Kosmik ESC, # 09740","description":"\u003ch1\u003eTelMe Module for Futaba Telemetry and Kontronik Kosmik Controllers, # 09740\u003c\/h1\u003e\n\n\u003cp\u003eAlmost all major remote control manufacturers now offer telemetry-capable systems. The KOSMIK and Jive Pro ESC series already have such an interface implemented.\u003c\/p\u003e\n\n\u003cp\u003eSimply connect the appropriate TelMe to the sensor output, and the KOSMIK or Jive Pro will automatically output the most important logging data in the correct format. The data can then be displayed both directly on the transmitter and in a telemetry box. TelMe ensures interference-free transmission of telemetry signals from the KOSMIK or Jive to the respective telemetry-capable receiver, which automatically recognizes the modules.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cspan\u003e\u003cb\u003eFor example, the following data is displayed:\u003c\/b\u003e\u003c\/span\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cspan\u003eMotor current \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eBattery voltage of the flight battery\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eCapacity drawn from the battery \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003ePower stage temperature \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eBEC current (if the speed controller has BEC current measurement) \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eBEC temperature \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003ePWM % \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003eMotor speed, if applicable rotor speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SOBEK Drives GmbH","offers":[{"title":"Default Title","offer_id":53445279252823,"sku":"K09740","price":86.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/K09740_b1_de55cf63-476a-418b-9594-ed8f43c6e770.jpg?v=1779800199"},{"product_id":"telme-modul-fur-graupner-hott-telemetrie-und-kontronik-kosmik-regler-09750","title":"TelMe module for Graupner HoTT Telemetry and Kontronik Kosmik ESC, # 09750","description":"\u003ch1\u003eTelMe module for Graupner HoTT telemetry and Kontronik Kosmik controllers, # 09750\u003c\/h1\u003e\n\n\u003cp\u003eAlmost all major remote control manufacturers now have telemetry-capable systems in their product range. Such an interface has already been implemented in the KOSMIK and Jive Pro controller series.\u003c\/p\u003e\n\n\u003cp\u003eSimply connect the appropriate TelMe to the sensor output and the KOSMIK or Jive Pro automatically outputs the most important logging data accordingly. The data can then be displayed both directly in the transmitter and in a telemetry box. TelMe ensures interference-free transmission of the telemetry signals from the KOSMIK or Jive to the respective telemetry-capable receiver, which automatically recognizes the modules.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cspan\u003e\u003cb\u003eThe following data is displayed, for example:\u003c\/b\u003e\u003c\/span\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cspan\u003eMotor current \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eBattery voltage from the flight battery\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eCapacity drawn from the battery \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eOutput stage temperature \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eBEC current (if the speed controller has BEC current measurement) \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eBEC temperature \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003ePWM % \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003eMotor speed, if applicable rotor speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SOBEK Drives GmbH","offers":[{"title":"Default Title","offer_id":53445279285591,"sku":"K09750","price":67.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/K09750_b1_7ded87f8-eb5e-4b86-ab2a-a1361a2bbbfc.jpg?v=1779800208"},{"product_id":"telme-modul-fur-multiplex-m-link-telemetrie-und-kontronik-kosmik-regler-09760","title":"TelMe module for Multiplex M-Link telemetry and Kontronik Kosmik ESCs, # 09760","description":"\u003ch1\u003eTelMe Module for Multiplex M-Link Telemetry and Kontronik Kosmik Controllers, # 09760\u003c\/h1\u003e\n\n\u003cp\u003eAlmost all major remote control manufacturers now have telemetry-capable systems in their product range. Such an interface has already been implemented in the KOSMIK and Jive Pro controller series.\u003c\/p\u003e\n\n\u003cp\u003eSimply connect the appropriate TelMe to the sensor output and the KOSMIK or Jive Pro will automatically output the most important logging data accordingly. The data can then be displayed both directly in the transmitter and in a telemetry box. TelMe ensures the interference-free transmission of telemetry signals from the KOSMIK or Jive to the respective telemetry-capable receiver, which automatically recognizes the modules.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cspan\u003e\u003cb\u003eFor example, the following data is displayed:\u003c\/b\u003e\u003c\/span\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\u003cspan\u003eMotor current \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eBattery voltage of the flight battery\u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eCapacity drawn from the battery \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eController temperature \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eBEC current (if the speed controller has BEC current measurement) \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003eBEC temperature \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003cspan\u003ePWM % \u003c\/span\u003e\u003c\/li\u003e\n\t\u003cli\u003eMotor speed, if applicable rotor speed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e","brand":"SOBEK Drives GmbH","offers":[{"title":"Default Title","offer_id":53445279318359,"sku":"K09760","price":67.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/K09760_b1_5d963d02-ecb9-4f85-a552-bcd242afda1e.jpg?v=1779800217"},{"product_id":"telme-modul-fur-jeti-telemetrie-und-kontronik-jive-pro-und-kosmik-regler","title":"TelMe module for JETI Telemetry and Kontronik Jive Pro and Kosmik controllers","description":"\u003ch1\u003eTelMe Module for JETI Duplex Telemetry and Kontronik Jive Pro and Kosmik Controllers\u003c\/h1\u003e\n\n\u003cp\u003eThe TelMe module serves as an interface between KONTRONIK Kosmik and Jive Pro controllers with a module interface and a telemetry-capable Jeti receiver. The module is automatically recognized by the controller, and the data output is adjusted accordingly.\u003cbr\u003e\nA fundamental prerequisite is that the remote control uses the Ex-Bus protocol. This is the case with all Jeti transmitters. The TelMe outputs numerous parameters, alarms, and limits, e.g., via:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eRPM\u003c\/li\u003e\n\t\u003cli\u003eBattery current and voltage\u003c\/li\u003e\n\t\u003cli\u003eMotor current\u003c\/li\u003e\n\t\u003cli\u003eBattery capacity\u003c\/li\u003e\n\t\u003cli\u003ePWM\u003c\/li\u003e\n\t\u003cli\u003ePower stage temperature\u003c\/li\u003e\n\t\u003cli\u003eBEC voltage \/ -current \/ -temperature\u003c\/li\u003e\n\t\u003cli\u003eand much more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SOBEK Drives GmbH","offers":[{"title":"Default Title","offer_id":53445279351127,"sku":"K09770","price":86.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/K09770_b1_d49d38dc-6d5a-4e52-bce5-57cd6a1c53aa.jpg?v=1779800226"},{"product_id":"telme-modul-fur-mikado-telemetrie-mit-kontronik-jive-pro-und-kosmik-regler","title":"TelMe module for Mikado Telemetry with Kontronik Jive Pro and Kosmik controllers","description":"\u003ch1\u003eTelMe Module for Mikado Telemetry with Kontronik Jive Pro and Kosmik Controllers\u003c\/h1\u003e\n\n\u003cp\u003eThe TelMe module serves as an interface between KONTRONIK Kosmik and Jive Pro controllers with a module interface and a telemetry-capable Mikado receiver. The module is automatically recognized by the controller, and the data output is adjusted accordingly.\u003cbr\u003e\nA fundamental prerequisite is that the remote control uses the Ex-Bus protocol. This is the case with all Jeti transmitters. The TelMe outputs numerous parameters, alarms, and limits, e.g., for:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eRPM\u003c\/li\u003e\n\t\u003cli\u003eBattery current and voltage\u003c\/li\u003e\n\t\u003cli\u003eMotor current\u003c\/li\u003e\n\t\u003cli\u003eBattery capacity\u003c\/li\u003e\n\t\u003cli\u003ePWM\u003c\/li\u003e\n\t\u003cli\u003eMOSFET temperature\u003c\/li\u003e\n\t\u003cli\u003eBEC voltage \/ -current \/ -temperature\u003c\/li\u003e\n\t\u003cli\u003eand much more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SOBEK Drives GmbH","offers":[{"title":"Default Title","offer_id":53445279383895,"sku":"K09775","price":86.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/K09775_b1_30f58ab4-c9e0-44d6-bd65-2d5873289544.jpg?v=1779800236"},{"product_id":"temperatursensor-fur-m-link-empfanger-multiplex-85402","title":"Temperature sensor for M-LINK receivers, Multiplex # 85402","description":"\u003ch1 style=\"text-align: center;\"\u003eTemperature Sensor for M-LINK Receivers\u003c\/h1\u003e\n\n\u003cp\u003eAfter activating the second measuring channel with the MPX MULTImate (# M82094) or via the PC program \"Sensor DataManager\" and connecting another temperature sensor (optional), a second temperature can be recorded.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBasic temperature sensor unit\u003c\/li\u003e\n\t\u003cli\u003eTemperature probe up to 200°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eAccessories:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTemperature probe up to 200°C # M85412\u003c\/li\u003e\n\t\u003cli\u003eHigh-temperature probe up to 500°C # M85413\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMeasuring range: - 20°C ... + 200 °C\u003c\/li\u003e\n\t\u003cli\u003eResolution: 1 °C\u003c\/li\u003e\n\t\u003cli\u003eDimensions (LxWxH): 30 x 15 x 7 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: approx. 10g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445650153815,"sku":"M85402","price":45.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M85402_b1_92ab28ce-7f1a-4a27-af8c-a4db001d6d8a.jpg?v=1779805559"},{"product_id":"temperaturfuhler-fur-temperatursensor-bis-200-c-multiplex-85412","title":"Temperature sensor probe up to 200°C, Multiplex #85412","description":"\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445650284887,"sku":"M85412","price":21.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M85412_b1_041e1592-aa0a-4732-bbec-31af4d5f98b3.jpg?v=1779805595"},{"product_id":"hochtemperaturfuhler-bis-500-c-fur-m-link-temperatursensor-multiplex-85413","title":"High-temperature sensor (up to 500°C) for M-Link temperature sensor, Multiplex #85413","description":"","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445650317655,"sku":"M85413","price":37.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M85413_b1_f0a6bf6b-279c-4d63-be48-7d72429e3092.jpg?v=1779805605"},{"product_id":"rpm-sensor-optisch-fur-m-link-multiplex-85414","title":"RPM Sensor (optical) for M-Link, Multiplex # 85414","description":"","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445650350423,"sku":"M85414","price":33.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M85414_b1_e1e3cc91-2b2f-448a-acb6-056159f8013b.jpg?v=1779805614"},{"product_id":"drehzahlsensor-rpm-sensor-magnetisch-fur-m-link-empfanger-85415","title":"RPM sensor (magnetic RPM sensor) for M-Link receivers, # 85415","description":"","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445650383191,"sku":"M85415","price":52.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M85415_b1_b6736330-613a-4515-9cc5-77c86c4fcafa.jpg?v=1779805623"},{"product_id":"true-air-speed-sensor-fur-m-link-telemetrie-multiplex-85418","title":"True Air Speed Sensor for M-Link Telemetry, Multiplex # 85418","description":"\u003ch1 style=\"text-align: center;\"\u003eTrue Air Speed Sensor for M-Link Telemetry, Multiplex # 85418\u003c\/h1\u003e\n\n\u003cp\u003eThe True Air Speed Sensor expands the M-Link program with an interesting sensor offering great possibilities. It displays real speed, and also integrates altitude and variometer functions. Warning thresholds can be individually set to alert you to critical flight conditions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eWarns of stalls\u003c\/b\u003e\u003cbr\u003e\nThe sensor measures the actual speed relative to the surrounding air and warns, for example, of a stall at too low an airspeed during approach.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003ePrecision Vario\u003c\/b\u003e\u003cbr\u003e\nThis vario sensor takes weather and atmospheric pressure changes into account when switched on, thus operating with extreme precision.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMeasurement of real airspeed via pitot pressure\u003c\/li\u003e\n\t\u003cli\u003eMeasurement of current altitude via ambient pressure\u003c\/li\u003e\n\t\u003cli\u003eMeasurement of sink\/climb rate via the additionally integrated variometer\/altitude sensor\u003c\/li\u003e\n\t\u003cli\u003eAutomatic calibration of sensors\u003c\/li\u003e\n\t\u003cli\u003eAdjustable warning thresholds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTrue-Airspeed + Vario Sensor\u003c\/li\u003e\n\t\u003cli\u003ePitot tube\u003c\/li\u003e\n\t\u003cli\u003e2 x Connection hose 2.5m\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445650514263,"sku":"M85418","price":97.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M85418_b1.jpg?v=1780481114"},{"product_id":"lipo-saver-sensor-6s-60a-fur-m-link-telemetrie-multiplex-85419","title":"LiPo Saver Sensor 6S - 60A for M-LINK Telemetry, Multiplex # 85419","description":"\u003ch1 style=\"text-align: center;\"\u003eLiPo Saver Sensor 6S - 60A for M-LINK Telemetry, Multiplex # 85419\u003c\/h1\u003e\n\n\u003cp\u003eFrom now on, protect your model and battery from the consequences of dangerous individual cell undervoltage with the M-Link LiPo SAVER 2...6S.\u003cbr\u003e\nThe LiPo SAVER precisely monitors the state of each individual cell and reports the voltage of the lowest cell to your Multiplex M-LINK remote control. The safety undervoltage warning occurs in two stages (absolute undervoltage of the selected battery type and pre-warning threshold).\u003cbr\u003e\nThe LiPo SAVER 2...6S - 60A also offers the ability to measure the current and display the remaining battery capacity (electronic fuel gauge). The current strength is included in the undervoltage evaluation, dynamically adjusting the undervoltage warning threshold. The automatic remaining capacity detection ensures safe operation, even when using partially charged batteries.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCell count: 2 - 6S\u003c\/li\u003e\n\t\u003cli\u003eCell type: LiFe, LiPo, LiIo\u003c\/li\u003e\n\t\u003cli\u003eBalancer system: XH, EH, TP\/FP\u003c\/li\u003e\n\t\u003cli\u003eIndividual cell measurement range: 1.0V ... 4.45V\u003c\/li\u003e\n\t\u003cli\u003eResolution: 0.1V\u003c\/li\u003e\n\t\u003cli\u003eMax. Current: 60A\u003c\/li\u003e\n\t\u003cli\u003eSensor weight: 5 \/ 7g\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 36x31x6.5mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445650547031,"sku":"M85419","price":54.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M85419_b1_1c737391-f306-4ad4-abc5-0910d74cd1c4.jpg?v=1779805660"},{"product_id":"flight-recorder-msb-data-logger-multiplex-85420","title":"Flight Recorder\/MSB Data Logger, Multiplex # 85420","description":"\u003ch1 style=\"text-align: center;\"\u003eFlight Recorder\/MSB Data Logger, # 85420\u003c\/h1\u003e\n\n\u003cp\u003eExtremely small, lightweight data logger that records all data available on the MULTIPLEX Sensor Bus (MSB) to a Micro-SD card.\u003c\/p\u003e\n\n\u003cp\u003eThe data is saved in .csv format and transferred to a PC via the Micro-SD card (Micro-SD USB card reader included). The data can then be displayed and analyzed using Microsoft Excel or LogView.\u003c\/p\u003e\n\n\u003cp\u003eThe Flight Recorder is connected to the sensor port (\"S\") of a telemetry-capable M-LINK receiver or any sensor in the model.\u003c\/p\u003e\n\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eThe recording duration with a 2GB Micro SD card is at least 100 hours with maximum data volume and maximum number of sensors. It is possible to replace it with a larger, commercially available Micro-SD card for even more recordings at any time.\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eRecording start\/stop is done via the remote control or alternatively automatically when switching on\/off.\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eFlight path display via GPS data in GoogleEarth:\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cblockquote\u003e\n\u003cp\u003eData export via LogView in \".kml\" data format for GoogleEarth is possible with the MULTIPLEX GPS # M85417 from version 1.30.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eOperation as a data logger in the transmitter possible\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cblockquote\u003e\n\u003cp\u003eThe FlightRecorder can also be operated as a telemetry data logger in the transmitter. The FlightRecorder is connected to the \"COM.\" interface* on the HFM3, HFM4, HFMx V2, HFMG or COCKPIT SX M-LINK. However, only when operated in the model as a true FlightRecorder is seamless data recording with maximum data rate of the telemetry or sensor values guaranteed. The operation of the FlightRecorder in the transmitter is also possible simultaneously with the Telemetry-Display # 4 5182! * For older modules HFM3 and HFM4 M-LINK as well as the COCKPIT SX M-LINK, a hardware or software update may be required.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003e\"Stand-alone operation\" possible\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cblockquote\u003e\n\u003cp\u003eOperation of the FlightRecorder is also possible without an M-LINK system (receiver and transmitter). The data of directly connected sensors is recorded (e.g., in models without 2.4GHz or third-party RC systems or independently of model sports during: hiking, bike tours, etc.)\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eThe firmware can be updated via PC\/Internet update (MULTIPLEX-Launcher) with USB-PC cable (UNI) # M85149.\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eFlightRecorder\u003c\/li\u003e\n\t\u003cli\u003e2GB Micro-SD card\u0026nbsp;\u003c\/li\u003e\n\t\u003cli\u003eMicro-SD USB card reader\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445650579799,"sku":"M85420","price":63.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M85420_b1_b663d125-cbf1-4dc0-a232-e3d82eceaf3a.jpg?v=1779805668"},{"product_id":"lipo-saver-sensor-6s-einzelspannung-fur-m-link-telemetrie-multiplex-85421","title":"LiPo Saver Sensor 6S - Individual Voltage for M-LINK Telemetry, Multiplex # 85421","description":"\u003ch1 style=\"text-align: center;\"\u003eLiPo Saver Sensor 6S - Individual Voltage for M-LINK Telemetry, Multiplex # 85421\u003c\/h1\u003e\n\n\u003cp\u003eFrom now on, protect your model and battery from the consequences of dangerous individual cell undervoltages with the M-Link LiPo SAVER 2...6S.\u003cbr\u003e\nThe LiPo SAVER meticulously monitors the condition of each individual cell and reports the voltage of the lowest cell to your Multiplex M-LINK remote control. The safety undervoltage warning occurs in two stages (absolute undervoltage of the selected battery type and pre-warning threshold).\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCell Count: 2 - 6S\u003c\/li\u003e\n\t\u003cli\u003eCell Type: LiFe, LiPo, LiIo\u003c\/li\u003e\n\t\u003cli\u003eBalancer System: XH, EH, TP\/FP\u003c\/li\u003e\n\t\u003cli\u003eIndividual Cell Measurement Range: 1.0V ... 4.45V\u003c\/li\u003e\n\t\u003cli\u003eResolution: 0.1V\u003c\/li\u003e\n\t\u003cli\u003eSensor Weight: 4 \/ 6g\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 31x21x6.5mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445650612567,"sku":"M85421","price":42.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M85421_b1_2d34de67-8569-49be-b6a9-9795f750e9ab.jpg?v=1779805677"},{"product_id":"silikonschlauch-set-5m-fur-true-airspeed-sensor-fur-m-link-multiplex-85422","title":"Silicone Tube Set 5m for True Airspeed Sensor for M-Link, Multiplex # 85422","description":"\u003cp\u003eSilicone Hose Set 5m for True Airspeed Sensor for M-Link, Multiplex # 85422\u003c\/p\u003e","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445650678103,"sku":"M85422","price":12.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M85422_b1.jpg?v=1777595613"},{"product_id":"prandtl-rohr-fur-true-airspeed-sensor-fur-m-link-multiplex-85423","title":"Prandtl Tube for True Airspeed Sensor for M-Link, Multiplex # 85423","description":"\u003cp\u003ePitot tube for True Airspeed Sensor for M-Link, Multiplex # 85423\u003c\/p\u003e","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445650710871,"sku":"M85423","price":24.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M85423_b1.jpg?v=1777595623"},{"product_id":"futaba-bl-rpm-sensor-sbs01rb-drehzahlsensor-zu-futaba-telemetrie","title":"FUTABA BL RPM Sensor SBS01RB, RPM sensor for Futaba Telemetry","description":"\u003ch1 style=\"text-align: center;\"\u003eFUTABA BL RPM Sensor SBS01RB, Speed Sensor\u003cbr\u003e\nfor Futaba Telemetry\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eDescription\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eTelemetry sensor for electronic measurement of motor speeds of brushless motors in all model types. No complicated magnet installation, super easy connection to 2 motor cables.\u003c\/p\u003e\n\n\u003cp\u003eEqually suitable for aircraft, heli, multicopter, boat, and car models. Connection is made to the S.BUS2 input of the telemetry receiver.\u003c\/p\u003e\n\n\u003cp\u003eThe sensor can be used with the following transmitters, but please note that for older transmitters, the corresponding software version may be required.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eHandheld transmitters: T4PM, T4PV, T6K, T10J, T12K, T14SG, T16SZ, T18SZ, T18MZ,\u003c\/li\u003e\n\t\u003cli\u003eTray transmitters: FX-22, FX-32, FX-36\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMeasuring range: 360 - 300,000 RPM\u003c\/li\u003e\n\t\u003cli\u003eOperating voltage: 3.7 - 7.4 V\u003c\/li\u003e\n\t\u003cli\u003eCurrent consumption: approx. 8 mA\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 42 x 11 x 5 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: 3.8 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FUTABA","offers":[{"title":"Default Title","offer_id":53445690261847,"sku":"MC-SBS01RB","price":25.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/MC-SBS01RB_b1.jpg?v=1779902506"},{"product_id":"futaba-rpm-sensor-magnetisch-sbs01rm-zu-futaba-telemetrie","title":"FUTABA RPM Sensor Magnetic SBS01RM for Futaba Telemetry","description":"\u003ch1 style=\"text-align: center;\"\u003eFUTABA Magnetic RPM Sensor SBS01RM\u003cbr\u003e\nfor Futaba Telemetry\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eRPM sensor for the Futaba telemetry system on the S.BUS2. Can be used for aircraft, helicopters, boats, and car models. Includes mounting material and magnets.\u003c\/p\u003e\n\n\u003cp\u003eThe sensor can be used with the following transmitters, but please note that older transmitters may require the appropriate software version.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eHandheld Transmitters:\u003c\/b\u003e T4PM, T4PV, T4PLS, T4GRS, T4PX\/R, T6K, T7PX, T7XC, T10J, T12K, T14SG, T16SZ, T18SZ, T18MZ,\u003cbr\u003e\n\u003cb\u003eTray Transmitters:\u003c\/b\u003e FX-22, FX-32, FX-36\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMeasurement Range: 360 - 100,000 RPM\u003c\/li\u003e\n\t\u003cli\u003eLength: 255mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: approx. 4.7g\u003c\/li\u003e\n\t\u003cli\u003eOperating Voltage: 3.7 - 7.4 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"FUTABA","offers":[{"title":"Default Title","offer_id":53445690491223,"sku":"MC-SBS01RM","price":47.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/MC-SBS01RM_b1_5cb4d052-79d5-4c54-9bc6-d4ee35b9aeea.jpg?v=1779806248"},{"product_id":"drehzahlsensor-sbs01ro-optisch-fur-futaba-telemetrie","title":"RPM Sensor SBS01RO Optical for Futaba Telemetry","description":"\u003ch1 style=\"text-align: center;\"\u003eSBS01RO Optical Speed Sensor for Futaba Telemetry\u003c\/h1\u003e\n\n\u003cp\u003eSpeed sensor for the Futaba telemetry system at the S.BUS2 output of Futaba telemetry receivers. Suitable for the transmitters: 4PLS, 4PX, T10J, T14SG, FX-22, FX-32, T18MZ, and for the Telemetry Box.\u003c\/p\u003e\n\n\u003cp\u003eCan be used equally for aircraft, helicopters, multicopters, boats, and car models.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMeasurement range: 360...300,000 rpm\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 26 x 13 x 13 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: 4.9 g\u003c\/li\u003e\n\t\u003cli\u003eOperating voltage: 3.7...7.4 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of Delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1 x Sensor unit with connector\u003c\/li\u003e\n\t\u003cli\u003e1 x Sensor holder\u003c\/li\u003e\n\t\u003cli\u003e2 x Adhesive pads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FUTABA","offers":[{"title":"Default Title","offer_id":53445690523991,"sku":"MC-SBS01RO","price":45.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/MC-SBS01RO_b1_b3e89c81-2fde-4878-8051-03aa614af099.jpg?v=1779806257"},{"product_id":"pitot-schlitten-powerbox-6618","title":"Pitot sled, PowerBox # 6618","description":"\u003ch1\u003ePitot Slide, PowerBox # 6618\u003c\/h1\u003e\n\n\u003cp\u003eThe Pitot Slide was developed to prevent transport damage caused by the protruding Pitot tube. The Pitot tube can be pushed in for transport and pulled out for flight. The built-in magnets lock the slide in both positions.\u003cbr\u003e\nThe Pitot Slide is supplied as a GRP kit including magnets and can be assembled in a few minutes with superglue.\u003c\/p\u003e","brand":"PowerBox Systems DEUTSCH","offers":[{"title":"Default Title","offer_id":53445700387159,"sku":"MD6618","price":20.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/MD6618_b1.jpg?v=1777597648"},{"product_id":"temperatursensor-5-fach-pbs-t250-powerbox","title":"Temperature sensor 5-way PBS - T250, Powerbox","description":"\u003ch1\u003e5-channel temperature sensor PBS - T250, Powerbox\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eProduct description:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe PBS-T250 can measure up to 5 temperatures simultaneously, allowing even the cylinder head temperatures of radial engines to be fully monitored. The set includes 2 temperature sensors; additional sensors are available as accessories. The PBS-T250 is Plug n' Play for the CORE telemetry system, but can also be configured for Jeti, Futaba, and Multiplex using the PowerBox Terminal. \u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eProduct features:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTemperature measurement up to 250°C\u003c\/li\u003e\n\t\u003cli\u003eConnections for 5 temperature sensors\u003c\/li\u003e\n\t\u003cli\u003eSmall design\u003c\/li\u003e\n\t\u003cli\u003eLow weight\u003c\/li\u003e\n\t\u003cli\u003eSupports the following telemetry systems: PowerBox CORE P²BUS, Multiplex M-Link, Jeti EX-Bus, Futaba \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOperating voltage 4.0V - 9.0V\u003c\/li\u003e\n\t\u003cli\u003eCurrent consumption (operation) max. 20mA\u003c\/li\u003e\n\t\u003cli\u003eSupported remote control systems PowerBox, Jeti, Multiplex, Futaba\u003c\/li\u003e\n\t\u003cli\u003eDimensions 32 x 18 x 10 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight 7g\u003c\/li\u003e\n\t\u003cli\u003eTemperature range -30°C to +85°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"PowerBox Systems DEUTSCH","offers":[{"title":"Default Title","offer_id":53445700714839,"sku":"MD6621","price":41.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/MD6621_b1_f154551e-9cae-4884-9bde-181becdae087.jpg?v=1779806719"},{"product_id":"pbs-dock-5-fach-verteiler-fur-powerbox-bus-powerbox","title":"PBS Dock, 5-way distributor for PowerBox Bus, Powerbox","description":"\u003ch1\u003ePBS Dock, 5-way distributor for PowerBox Bus, Powerbox\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eProduct description:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf multiple sensors need to be connected to the P²BUS, the PBS-Dock can ensure clean wiring. There is no electronics built into the PBS-Dock as the P²BUS is a true bus with addressing. The PBS-Dock can therefore also serve as a servo distributor for BUS-enabled servos or as a power distributor for other applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eProduct features:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eConnection option for 5 sensors\u003c\/li\u003e\n\t\u003cli\u003eCan be used for P²BUS sensors or other purposes\u003c\/li\u003e\n\t\u003cli\u003eSmall design, low weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOperating voltage 4.0V - 16.0V\u003c\/li\u003e\n\t\u003cli\u003eDimensions 32 x 18 x 10 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight 7g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"PowerBox Systems DEUTSCH","offers":[{"title":"Default Title","offer_id":53445700747607,"sku":"MD6624","price":21.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/MD6624_b1_abf5f4b2-1706-4526-ab26-10bdd4be4c21.jpg?v=1779806729"},{"product_id":"drehzahlsensor-optisch-fur-unitest-2-unilog-unilog-2-2210","title":"Optical RPM Sensor for UniTest 2, UniLog, UniLog 2, # 2210","description":"\u003ch1\u003eOptical speed sensor for UniTest 2, UniLog, UniLog 2, # 2210\u003c\/h1\u003e\n\n\u003cp\u003eExternal optical speed sensor for connection to UniTest2, UniLog 1+ 2. On UniTest 2, you can switch between the internal and external sensor via software. Ideal for setting up permanent test benches.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448645247319,"sku":"SM2210","price":8.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM2210_b1_6afdf11f-e862-4f06-869d-996a7dca008e.jpg?v=1779817507"},{"product_id":"drehzahlsensor-magnetisch-fur-unitest-2-unilog-unilog-2-und-jlog2-2211","title":"Magnetic RPM Sensor for UniTest 2, UniLog, UniLog 2 and JLog2, # 2211","description":"\u003ch1\u003eMagnetic speed sensor for UniTest 2, UniLog, UniLog2 and JLog2 SM-Modellbau # 2211\u003c\/h1\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eWith this sensor and 2 magnets, RPM measurements are possible regardless of light sources or artificial light influences. The magnets must be attached to the motor shaft, and the sensor itself is mounted in the model flush with the magnets at a maximum distance of 10 mm. The underside with the small black sensor points towards the magnet.\u003c\/p\u003e\n\n\u003cp\u003eA built-in LED allows for easy function control. As soon as the magnet with the correct magnetic side approaches the sensor, the LED lights up. While the connection is automatically recognized on the UniLog, the UniTest 2 only requires switching between the internal and external sensor via software.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003emagnetic speed sensor only\u003c\/li\u003e\n\t\u003cli\u003e2 neodymium magnets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448646230359,"sku":"SM2211","price":8.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM2211_b1_1a2047ed-fcbf-4e6c-9eb0-e29ad81cc280.jpg?v=1779817516"},{"product_id":"brushless-drehzahlsensor-fur-unitest-2-unilog-unilog-2-und-jlog2-sm-2213","title":"Brushless speed sensor for UniTest 2, UniLog, UniLog 2 and JLog2, SM # 2213","description":"\u003ch1\u003eBrushless RPM Sensor for UniTest 2, UniLog, UniLog 2 and JLog 2 SM-Modellbau # 2213\u003c\/h1\u003e\n\n\u003cp\u003eThe brushless RPM sensor is simply connected to one of the brushless motor's leads for measurement. In the setup of the UniLog \/ UniTest 2 \/ JLog 2, the correct number of measurement pulses per revolution must be specified for RPM measurement. For the brushless RPM sensor, this is the number of motor poles. A classic inrunner, such as a Lehner or Hacker motor, has 2 poles. An outrunner usually has 10 or 14 poles. Additionally, the gear ratio can also be specified. So, if the RPM of an inrunner with a gearbox is measured with the brushless RPM sensor, an attached gearbox can also be factored in. This way, the actual propeller RPM is obtained.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ebrushless RPM sensor\u003c\/li\u003e\n\t\u003cli\u003econnector for connecting to the motor cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448646852951,"sku":"SM2213","price":12.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM2213_b1_4810dcc7-1303-4650-b500-2efbcaf6185e.jpg?v=1779817525"},{"product_id":"temperatursensor-40-c-bis-125-c-fur-unitest-2-unilog-1-2-und-lipowatch","title":"Temperature sensor, -40°C to +125°C, for UniTest 2, UniLog 1+2 and LiPoWatch","description":"\u003ch1\u003eTemperature sensor, -40°C to +125°C, for UniTest 2, UniLog 1+2 and LiPoWatch\u003c\/h1\u003e\n\n\u003cp\u003eExternal temperature sensor for connection to UniTest 2, UniLog 1 + 2 and LiPoWatch.\u003cbr\u003e\nWith this sensor, a temperature in the range of -40 °C to +125 °C can be displayed and recorded in parallel with the drive measurement data. For recording battery or motor temperatures.\u003cbr\u003e\nThis sensor is without magnet and therefore particularly small and thin.\u003cbr\u003e\nOne sensor can be connected to the LiPoWatch, a maximum of two to the UniTest 2 and even three temperature sensors can be connected simultaneously to the UniLog 1 + 2.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eIn the setup of UniLog 1 + 2, the \"Temperature\" setting must be selected for this sensor at the desired input A1 to A3.\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448647835991,"sku":"SM2221","price":6.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM2221_b1_56ae9407-52f4-485e-880a-677f3341cba3.jpg?v=1779817534"},{"product_id":"temperatursensor-pt1000-50-c-bis-300-c-fur-unilog2-sm-2225","title":"Temperature sensor PT1000 (-50°C to +300°C) for UniLog2, SM # 2225","description":"\u003ch1\u003ePT1000 Temperature Sensor for UniLog2 SM-Modellbau # 2225\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eExternal PT1000 temperature sensor for connection to the UniLog 2.\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eWith this sensor, a temperature in the range of -50 °C to +300 °C can be displayed and recorded in parallel with the drive measurement data. For recording battery or motor temperatures. This sensor corresponds to the PT1000 standard and is very small and thin. The sensor element is only 5 x 2 x 0.7 mm.\u003c\/p\u003e\n\n\u003cp\u003eIn the UniLog 2 setup, the \"PT1000\" setting must be selected for this sensor at the desired input A1 to A3.\u003c\/p\u003e\n\n\u003cp\u003eA maximum of 3 sensors can be connected to the UniLog 2.\u003c\/p\u003e\n\n\u003cp\u003ePlease note: this sensor is not suitable for the JLog2!\u003c\/p\u003e\n\n\u003cp\u003eFor the JLog2, sensor item no. 2221 (analog) and sensor item no. 2820 can be used.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eTemperature sensor only\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448649277783,"sku":"SM2225","price":12.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM2225_b1_1e6eefa7-5c9c-4dfd-9e97-73e2b6e4d9ac.jpg?v=1779817543"},{"product_id":"unidisplay-komplett-mit-anschlusskabel-sm-2400","title":"UniDisplay+, complete with connection cable, SM # 2400","description":"\u003ch1\u003eUniDisplay+, complete with connection cable SM # 2400\u003c\/h1\u003e\n\n\u003cp\u003eConvenient evaluation and setting options for UniLog, GPS-Logger, LiPoWatch, InfoSwitch and JLog2. With the UniDisplay, all measured values of UniLog, GPS-Logger, LiPoWatch, InfoSwitch and JLog2 can be displayed live and parameters can be set directly. In addition, the entire data memory of the UniLog or LiPoWatch can be quickly viewed. In this way, one can quickly determine the maximum power consumption of a drive (e.g. at the airfield) even without extensive data evaluation.\u003c\/p\u003e\n\n\u003cp\u003eOperation is very simple and self-explanatory via four buttons.\u003c\/p\u003e\n\n\u003cp\u003eThe firmware of the UniDisplay can be updated at any time from the PC using the USB interface cable (item no. 2550 or already included with the UniLog). This means the UniDisplay is well equipped for future extensions, such as upcoming innovations from SM-Modellbau. Updates are provided free of charge on the SM-Modellbau homepage.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eUniDisplay complete with connection cable\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448651047255,"sku":"SM2400","price":31.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM2400_b1_6766ce0f-0baa-4e3c-85a5-f45dd205dcac.jpg?v=1780475680"},{"product_id":"anschlusskabel-zu-uni-display-2401","title":"Connecting cable for uni-display, # 2401","description":"","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448652030295,"sku":"SM2401","price":2.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM2401_b1_ed3f2a80-e76e-4559-9e1a-8ecbd5a56597.jpg?v=1779817570"},{"product_id":"com-anschluss-verlangerungskabel-sm-2522","title":"COM Port Extension Cable, SM # 2522","description":"\u003ch1\u003eCOM Port Extension Cable, # 2522\u003c\/h1\u003e\n\n\u003cp\u003eExtension cable for the serial interface (COM) on UniSens-E, UniLog 1\/2, GPS-Logger 1\/2, LiPoWatch and InfoSwitch.\u003cbr\u003e\nThis cable allows the port to be moved to an easily accessible location. This enables comfortable data reading or external connection of the UniDisplay, even if the device is installed in an inaccessible position within the model.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eExtension cable for the serial interface (COM), 10 cm long\u003c\/li\u003e\n\t\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448658485591,"sku":"SM2522","price":4.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM2522_b1_48aa9931-a69f-4585-a417-00ac2d3c1a7a.jpg?v=1779817634"},{"product_id":"usb-interface-fur-unisens-unilog-infoswitch-lipowatch-micro-vario-sm-2550","title":"USB Interface for UniSens, UniLog, InfoSwitch, LipoWatch, Micro-Vario SM # 2550","description":"\u003ch1\u003eUSB Interface, UniSens and UniLog, InfoSwitch, LipoWatch, Micro-Vario SM # 2550\u003c\/h1\u003e\n\n\u003cp\u003eThis connection cable enables firmware updates for GPS-Logger, InfoSwitch, UniDisplay, UniLog 1, LiPoWatch, UniSens-E and Micro-Vario via PC.\u003c\/p\u003e\n\n\u003cp\u003eCorresponding updates can be downloaded free of charge from the SM-Modellbau website. In addition, the measured values stored in UniLog 1 or LiPoWatch can be transferred to the PC and then conveniently evaluated graphically.\u003c\/p\u003e\n\n\u003cp\u003eWith the GPS-Logger, UniLog 1, UniLog 2, JLog2, Micro-Vario and UniSens-E, this cable can also be used to display live measured values on the PC.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eUSB interface cable only\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448664023383,"sku":"SM2550","price":15.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM2550_b1_5b36188f-8909-4fda-bae6-cd2b18091dbc.jpg?v=1780475689"},{"product_id":"com-kabel-fur-jeti-duplex-interface-100-mm-sm-modellbau-2558","title":"COM Cable for Jeti Duplex Interface, (100 mm), SM-Modellbau # 2558","description":"\u003ch1\u003eCOM cable for Jeti Duplex Interface, short version (100 mm) SM-Modellbau # 2558\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1x COM cable for the Jeti Duplex Interface, 100 mm long\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448664908119,"sku":"SM2558","price":1.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM2558_b1_03c9bf55-f796-4fd0-8b83-22f1fb6a9aae.jpg?v=1779817708"},{"product_id":"speedsensor-250-450km-h-sm-2560","title":"Speed sensor 250\/450 km\/h, SM # 2560","description":"\u003ch1\u003eSpeed Sensor 250\/450km\/h, SM # 2560\u003c\/h1\u003e\n\n\u003cp\u003eTrue speed measurement up to 450 km\/h! With the Speed Sensor as an addition to the UniLog, it is possible to measure and record flight speeds from 0 - 450 km\/h. Speed is measured by detecting dynamic pressure (i.e., the air pressure generated by flight speed) and ambient air pressure.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe Speed Sensor consists of two parts:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe \u003cb\u003ePitot tube\u003c\/b\u003e is designed as a Prandtl tube. The ambient pressure is measured directly at the Pitot tube via the annular bores. This way, the system is independent of the pressure conditions in the fuselage (e.g., incoming cooling air).\u003c\/li\u003e\n\t\u003cli\u003ePrecision \u003cb\u003edifferential pressure sensor\u003c\/b\u003e with connection to the UniLog.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePower is supplied by the UniLog. The connection between the Pitot tube and the sensor is established via two thin silicone hoses.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eElectronics dimensions: 17 x 15 x 15 mm plus hose connectors\u003c\/li\u003e\n\t\u003cli\u003eMass 6 g\u003c\/li\u003e\n\t\u003cli\u003ePitot (Prandtl) tube dimensions: ø4 x 65 mm\u003c\/li\u003e\n\t\u003cli\u003eMass 4 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eScope of Delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSpeed Sensor\u003c\/li\u003e\n\t\u003cli\u003ePitot tube\u003c\/li\u003e\n\t\u003cli\u003e2 x 1 m silicone hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448666317143,"sku":"SM2560","price":54.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM2560_b1_e27bf20f-ac4c-4389-b0fb-03e605eae820.jpg?v=1779817717"},{"product_id":"staudruckrohr-mit-schlauchen-einzeln-sm-modellbau-2561","title":"Pitot tube with hoses, single, SM-Modellbau # 2561","description":"\u003ch1\u003ePitot tube with hoses, individual SM-Modellbau # 2561\u003c\/h1\u003e\n\n\u003cp\u003eSpare part for the speed sensors.\u003c\/p\u003e\n\n\u003cp\u003eThis also allows several models to be permanently equipped with the pitot tube, and the electronics can then be swapped as needed.\u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448667300183,"sku":"SM2561","price":24.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM2561_b1.jpg?v=1777647975"},{"product_id":"speedsensor-nur-elektronik-einzeln-250-450km-h-fur-unilog-1-2-sm-2563","title":"Speed sensor (electronics only), 250\/450km\/h, for UniLog 1+2, SM # 2563","description":"\u003ch1\u003eSpeed sensor (electronics only), 250\/450km\/h, for UniLog 1+2 SM # 2563\u003c\/h1\u003e\n\n\u003cp\u003ePitot speed sensor \u003cb\u003e(electronics only)\u003c\/b\u003e suitable for UniLog 1+2, as a spare part, \u003cb\u003ewithout pitot tube and hoses\u003c\/b\u003e.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448667857239,"sku":"SM2563","price":32.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM2563_b1_ac4bbb8c-43fd-4116-88eb-b4a67244618b.jpg?v=1779817726"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/collections\/MSpeed-450-Duplex-2-4EX-Geschwindigkeitssensor-80-450km-h-Hacker-80001318-H80001318_b_0.jpg?v=1771326042","url":"https:\/\/hoelleinshop.com\/en\/collections\/fernsteuerungen-zubehor-telemetrie-diverse-sensoren.oembed","provider":"hoelleinshop","version":"1.0","type":"link"}