{"title":"Vario","description":"","products":[{"product_id":"vario-sensor-fur-futaba-telemetrie-ff1712","title":"Vario Sensor for Futaba Telemetry, # FF1712","description":"\u003ch1\u003eVario-Sensor for Futaba Telemetry, # FF1712\u003c\/h1\u003e\n\n\u003cp\u003eInexpensive, small and lightweight vario altitude sensor for the Robbe-Futaba FASSTest® telemetry system. The individual sensor ID automatically configures the sequence and display unit when the sensor is registered (on the transmitter or telemetry box).\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures of the Vario Sensor: \u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003eVario sensor with altitude measurement\u003c\/li\u003e\n\t\u003cli\u003eTone signal output with 5 tones for climbing or sinking\u003c\/li\u003e\n\t\u003cli\u003e2-stage warning threshold for climb and sink rate\u003c\/li\u003e\n\t\u003cli\u003e2-stage warning threshold for minimum and maximum altitude\u003c\/li\u003e\n\t\u003cli\u003eDisplay and storage of minimum and maximum altitude\u003c\/li\u003e\n\t\u003cli\u003eAdjustable alarm time: Off, 5…30 sec. or always on\u003c\/li\u003e\n\t\u003cli\u003eAdjustable alarm repeat time: always on, 1… 5x per\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eVario measuring range: -50m\/s …+50m\/s\u003c\/p\u003e\n\n\u003cp\u003eVario resolution: approx. 10cm\/s\u003c\/p\u003e\n\n\u003cp\u003eAltitude measurement: -500m ... +3000m\u003c\/p\u003e\n\n\u003cp\u003eAltitude measurement resolution: 1m\u003c\/p\u003e\n\n\u003cp\u003eDimensions approx.: 30x14x8mm\u003c\/p\u003e\n\n\u003cp\u003eWeight approx.: 5.5g\u003c\/p\u003e\n\n\u003cp\u003eOperating voltage: 3.6 ... 8.4V\u003c\/p\u003e\n\n\u003cp\u003eCurrent consumption: approx. 30mA\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"ROBBE-Modellsport","offers":[{"title":"Default Title","offer_id":53439862079831,"sku":"AVFF1712","price":38.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/AVFF1712_b1_46c83283-00d9-4b4a-a84c-b9506ee3c9c0.jpg?v=1779893364"},{"product_id":"vario-modul-graupner-hott-2-4ghz-d-power-33601","title":"Vario Module Graupner HoTT 2.4GHz, D-Power # 33601","description":"\u003ch1 style=\"text-align: center;\"\u003eVario Module Graupner HoTT\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eProduct Information:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eVario module with altitude display for the Graupner HoTT system\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eClimb and descent signals \u003c\/li\u003e\n\t\u003cli\u003eAdditional warning thresholds for min. altitude, max. altitude, climb and descent speed in two stages\u003c\/li\u003e\n\t\u003cli\u003eAltitude display and storage of minimum and maximum altitude\u003c\/li\u003e\n\t\u003cli\u003eAdjustable warning time: OFF, 5, 10, 15, 20, 25, 30 seconds, always\u003c\/li\u003e\n\t\u003cli\u003eAdjustable warning repeat time: Always, 1, 2, 3, 4, 5 min, once\u003c\/li\u003e\n\t\u003cli\u003eAltitude measurement: from -500 to 3000m\u003c\/li\u003e\n\t\u003cli\u003e23 x 17(26.5) x 7.5mm, 5g\u003c\/li\u003e\n\t\u003cli\u003eOperating voltage range from 3.6-8.4V\u003cbr\u003e\n\t \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eImportant warning when using modules 33600, 33601, 33610, 33611 and 33620:\u003c\/b\u003e\u003cbr\u003e\nDo not make any programming changes to the sensors during flight, so that your model cannot get out of control due to carelessness!\u003cbr\u003e\nWhen using two or more receivers in the model, you must never make programming changes during flight, as this can lead to incorrect settings in the receivers without connected telemetry and thus, in the worst case, to the loss of the model! Therefore, always program on the ground and make sure that only the receiver to be programmed with the connected sensor is switched on.\u003c\/p\u003e","brand":"Graupner Co., Ltd","offers":[{"title":"Default Title","offer_id":53440106955095,"sku":"DP33601","price":57.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/DP33601_b1_51b6293b-1d00-449c-8915-5ba612b96dcd.jpg?v=1779920455"},{"product_id":"general-air-modul-fur-2-6s-mit-vario-graupner-hott-2-4ghz-d-power-33611","title":"General Air Module for 2-6S, with Vario, Graupner HoTT 2.4GHz, D-Power # 33611","description":"\u003ch1 style=\"text-align: center;\"\u003eGeneral Air Module 2-6S, with Vario, HoTT 2.4GHz System\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eProduct Information:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe General Air Module is a universal sensor for Graupner HoTT receivers and models with internal combustion or electric motors.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFunctions:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eVario with altitude signals and climb and sink signals, and additional warning thresholds for min. altitude, max. altitude, climb and sink rate in two stages, altitude display (- 500 ... 3000 m), and storage of min. and max. altitude.\u003c\/li\u003e\n\t\u003cli\u003e2 x temperature and voltage measurements with warning thresholds for min. and max. voltage and min. and max. temperature.\u003c\/li\u003e\n\t\u003cli\u003eSingle cell measurement with warning thresholds for min. voltage.\u003c\/li\u003e\n\t\u003cli\u003eVoltage, current, and capacity measurement with warning thresholds for min. and max. voltage, max. capacity, and max. current.\u003c\/li\u003e\n\t\u003cli\u003eRPM measurement with RPM control (programmable) and warning thresholds for min. and max. RPM.\u003c\/li\u003e\n\t\u003cli\u003eFuel measurement with warning thresholds in 25% increments. Adjustable warning time: OFF, 5, 10, 15, 20, 25, 30 seconds, always.\u003c\/li\u003e\n\t\u003cli\u003eAdjustable warning repeat time: Always, 1, 2, 3, 4, 5 min, once.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eConnections: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e2 x temperature optionally 0 to 120°C or 200°C and voltage measurement up to 80V DC.\u003c\/li\u003e\n\t\u003cli\u003e1 x RPM measurement up to 100,000 rpm with two-blade propeller.\u003c\/li\u003e\n\t\u003cli\u003e1 x speed controller\/servo input.\u003c\/li\u003e\n\t\u003cli\u003e1 x RPM control input.\u003c\/li\u003e\n\t\u003cli\u003e1 x speed controller\/servo output for RPM control.\u003c\/li\u003e\n\t\u003cli\u003e1 x current, voltage, and capacity measurement up to 40A (pulse up to 60A) and up to 30V.\u003c\/li\u003e\n\t\u003cli\u003e1 x single cell monitoring for 2-6S lithium batteries (LiPo, LiIo, LiFe).\u003c\/li\u003e\n\t\u003cli\u003e1 x receiver power supply input and output.\u003c\/li\u003e\n\t\u003cli\u003e1 x telemetry connection for receiver.\u003c\/li\u003e\n\t\u003cli\u003e1 x fuel sensor 0% - 25% - 50% - 75% - 100%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data General Air Module HoTT:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eWeight approx. 31g\u003c\/li\u003e\n\t\u003cli\u003eDimensions approx. 41 (48) x 44 (56) x 16mm\u003c\/li\u003e\n\t\u003cli\u003eOperating voltage: 3.6 ... 8.4V\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eImportant warning notice when using modules 33600, 33601, 33610, 33611 and 33620:\u003c\/b\u003e\u003cbr\u003e\nDo not make any programming changes to the sensors during flight, to prevent your model from losing control due to carelessness!\u003cbr\u003e\nWhen using two or more receivers in the model, you must under no circumstances make any programming changes during flight, as this can lead to incorrect settings in receivers without connected telemetry, and in the worst case, to the crash of the model! Therefore, always program on the ground and ensure that only the receiver to be programmed with the connected sensor is switched on.\u003c\/p\u003e","brand":"Graupner Co., Ltd","offers":[{"title":"Default Title","offer_id":53440114065751,"sku":"DP33611","price":83.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/DP33611_b1.jpg?v=1779788282"},{"product_id":"gps-vario-module-alpha-d-power-s8437","title":"GPS\/VARIO Module ALPHA D-Power # S8437","description":"\u003ch1 style=\"text-align: center;\"\u003eGPS\/VARIO Module Alpha\u003cbr\u003e\nD-Power # S8437\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eNew:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eFast and precise GPS for multirotors, flight models, car and boat models.\u003c\/p\u003e\n\n\u003cp\u003eUblox 8 GPS receiver for GPS\/GLONASS satellites. Enables, for example, lap time measurement using the HoTT Viewer App.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eVario with altitude signals and 5 climb and 5 sink tones each\u003c\/li\u003e\n\t\u003cli\u003eAdditional warning thresholds for min. altitude, max. altitude, climb and sink rate in two stages\u003c\/li\u003e\n\t\u003cli\u003eAltitude display and storage of min. and max. altitude\u003c\/li\u003e\n\t\u003cli\u003eGPS with distance measurement, track measurement, speed display, flight direction and coordinate display,\u003c\/li\u003e\n\t\u003cli\u003emax. distance\u003c\/li\u003e\n\t\u003cli\u003emax. speed\u003c\/li\u003e\n\t\u003cli\u003eAdjustable warning time: OFF, 5, 10, 15, 20, 25, 30 seconds, continuous\u003c\/li\u003e\n\t\u003cli\u003eAdjustable warning repeat time: Always, 1, 2, 3, 4, 5 min, once\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe GPS\/Vario sensor can be connected directly to the telemetry input of the receiver.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eImportant note when using modules 33600, 33601, 33610, 33611 and 33620: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eDo not make any programming changes to the sensors during flight to prevent your model from getting out of control due to carelessness! When using two or more receivers in the model, you must under no circumstances make programming changes during flight, as this can lead to incorrect settings in receivers without connected telemetry and, in the worst case, to a crash of the model! Therefore, always program on the ground and make sure that only the receiver to be programmed with the connected sensor is switched on.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eVario: Altitude measurement: -500 m ... +3000 m\u003c\/li\u003e\n\t\u003cli\u003eResolution: 0.1 m\u003c\/li\u003e\n\t\u003cli\u003eVario sensitivity: 0.5 m \/ 3s, 1 m \/ 3 s, 0.5 m \/ s, 1 m \/ 1 s, 3 m \/ s per tone programmable\u003c\/li\u003e\n\t\u003cli\u003eAveraging: 4 - 40 measurements per reading programmable\u003c\/li\u003e\n\t\u003cli\u003ePower consumption GPS + Vario: approx. 110 mA \u003c\/li\u003e\n\t\u003cli\u003eDimensions approx.: 38 x 30 (45) x 16 mm\u003c\/li\u003e\n\t\u003cli\u003eOperating voltage: 5 ... 8.4 V\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Graupner Co., Ltd","offers":[{"title":"Default Title","offer_id":53440435618135,"sku":"DPS8437","price":97.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/DPS8437_b1.jpg?v=1780905809"},{"product_id":"mvario-2-rev-2-hohen-variosensor-fur-jeti-duplex-2-4ex-80001328","title":"MVario 2 rev.2 Altitude\/Vario Sensor for Jeti Duplex 2.4EX, # 80001328","description":"\u003ch1 style=\"text-align: center;\"\u003eMVario 2 \/V2 Altitude\/Vario Sensor for Jeti Duplex 2.4EX\u003cbr\u003e\n# 80001328\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eProduct Description and Features\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe JETI MVario2 \/V2 is a full-fledged glider variometer. This sensor evaluates changes in atmospheric air pressure. From the measured data, the MVario 2 EX calculates altitude above sea level, relative altitude above ground, and climb and descent rates.\u003c\/p\u003e\n\n\u003cp\u003eTrue glider variometer function with variometer acoustics, including display and voice output of values in real-time via JETI Duplex DC and DS transmitters.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eVery fast and accurate detection of climb and descent rates.\u003c\/li\u003e\n\t\u003cli\u003eMeasurement of altitude, air pressure, temperature, climb\/descent.\u003c\/li\u003e\n\t\u003cli\u003eVariometer tone via JETI Duplex DC \/ DS-12\/14\/16\/24 transmitters\u003c\/li\u003e\n\t\u003cli\u003eOption for acoustic alarms with JETI Duplex transmitter modules and the JETI Box Profi.\u003c\/li\u003e\n\t\u003cli\u003eUse as an expander for connecting additional sensors.\u003c\/li\u003e\n\t\u003cli\u003eAdjustable energy compensation (TEK) in conjunction with the MSPEED EX sensor.\u003c\/li\u003e\n\t\u003cli\u003eUse as a \"motor OFF\" switch when programmed altitude limits are reached (FAI F5J or ALES competition categories).\u003c\/li\u003e\n\t\u003cli\u003eThe MVario 2 is compatible with the EX Bus protocol for convenient setup via the device overview of the DC\/DS-16 transmitters.\u003c\/li\u003e\n\t\u003cli\u003eVery small design.\u003c\/li\u003e\n\t\u003cli\u003eFirmware updates possible via JETI USBa adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDimensions: 35x16x7mm\u003c\/li\u003e\n\t\u003cli\u003eWeight incl. cable: 5 g\u003c\/li\u003e\n\t\u003cli\u003eMeasurement accuracy of absolute\/relative altitude: ±9m\/±3m\u003c\/li\u003e\n\t\u003cli\u003eAltitude measurement resolution: 0.1m\u003c\/li\u003e\n\t\u003cli\u003eMeasurement range: 450÷1100hPa\u003c\/li\u003e\n\t\u003cli\u003eTemperature range: -10÷85°C\u003c\/li\u003e\n\t\u003cli\u003ePower supply range: 3.5 ÷ 8.4V\u003c\/li\u003e\n\t\u003cli\u003eCurrent consumption: 15mA\u003c\/li\u003e\n\t\u003cli\u003eCable length: 260mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of Delivery\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMVario 2 \/V2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JETI model, s. R. O.","offers":[{"title":"Default Title","offer_id":53441114112343,"sku":"H80001328","price":83.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/H80001328_b1_529e3f3f-f6fb-4027-9bf2-284e6e742ef1.jpg?v=1781274524"},{"product_id":"hepf-micro-vario-hohenmesser-und-variometer","title":"HEPF Micro Vario, Altimeter and Variometer","description":"\u003ch1 style=\"text-align: center;\"\u003eHEPF Micro Vario, Altimeter and Variometer\u003c\/h1\u003e\n\n\u003cp\u003eThe HEPF MicroVario is a sensitive altimeter\/variometer that uses the latest MEMS technology to achieve high accuracy while maintaining miniature dimensions.\u003cbr\u003e\nThe sensor can detect tiny changes in air pressure to indicate the climb\/sink rate.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eEssential for training with DLG's\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eTiny dimensions. The sensor plugs directly into the receiver's telemetry port. \u003c\/li\u003e\n\t\u003cli\u003eAccurate measurement of absolute\/relative altitude and climb\/sink rate. \u003c\/li\u003e\n\t\u003cli\u003eAutomatic telemetry detection: Duplex EX, Hott, MSB, S.Bus2. \u003c\/li\u003e\n\t\u003cli\u003eConfigurable alarms for altitude and climb rate. \u003c\/li\u003e\n\t\u003cli\u003eConfiguration via the transmitter\u003c\/li\u003e\n\t\u003cli\u003eFirmware updates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eThe Micro Vario plugs directly into the receiver's telemetry port. Alternatively, a servo extension cable could be plugged in between the receiver and the Micro Vario.\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTelemetry and Settings:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe device is compatible with the JETIBOX and can be used for programming.\u003cbr\u003e\nThe JETIBOX menu is divided into three sections:\u003c\/p\u003e\n\n\u003col\u003e\n\t\u003cli\u003eActual values - Displays the current telemetry values (altitude, variation, pressure, temperature) along with minimum and maximum values. \u003c\/li\u003e\n\t\u003cli\u003eReset Min\/Max - Press the left + right buttons simultaneously to reset all minimums and maximums.\u003c\/li\u003e\n\t\u003cli\u003eSettings\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eLanguage - You can select the language of the JETIBOX screen.\u003c\/li\u003e\n\t\u003cli\u003eVario Sensitivity - defines the filter amount for the pressure sensor data. Increasing the sensitivity will give you a faster response to changes in altitude. Please note that the indicated noise may also occur. (Default: Medium)\u003c\/li\u003e\n\t\u003cli\u003eSink Rate – Sink rate of the aircraft when there are no thermal effects. The sink rate value is added to the climb rate. This results in more accurate localization of thermal currents.\u003cbr\u003e\n\tExample: If the model flies with a nominal sink rate of 0.5 m\/s, the vario is silent. As soon as the model enters a thermal, a beep sounds (although the aircraft may still be sinking).\u003c\/li\u003e\n\t\u003cli\u003eSealevel Pressure – The sea level pressure is used as a reference to calculate the absolute altitude. To get the most accurate altitude calculation, set the pressure at your location to sea level. The International Standard Atmosphere Model defines the sea level pressure at 1013 hPa.\u003c\/li\u003e\n\t\u003cli\u003eRound Altitude – Enable or disable the rounding of altitude values displayed on the transmitter. Relative and absolute altitude rounded to full meters, decimal part omitted.\u003c\/li\u003e\n\t\u003cli\u003eAltitude Alarm – You can set an altitude alarm. *)\u003c\/li\u003e\n\t\u003cli\u003eVario Alarm – You can set an alarm value for excessive climbing or sinking.*)\u003c\/li\u003e\n\t\u003cli\u003eAlarm Interval – defines the time period between alarm announcements.\u003c\/li\u003e\n\t\u003cli\u003eService – In this menu, you can view the device version and reset to the factory default configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e*) The alarm setting is compatible with Duplex and Hott systems.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\u003cb\u003eDimensions: \u003c\/b\u003e21.5x10x4mm\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eWeight\u003c\/b\u003e: 1g\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003ePressure range: \u003c\/b\u003e300÷1200hPa\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eAltitude resolution: \u003c\/b\u003e0.1m\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eTypical variometer noise ratio: \u003c\/b\u003e± 0.05m\/s\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eOperating current: \u003c\/b\u003e15mA\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eOperating temperature: \u003c\/b\u003e-20 – 85°C\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eOperating voltage: \u003c\/b\u003e3.5 – 12V\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eTelemetry: \u003c\/b\u003eDuplex EX, Multiplex MSB, Graupner Hott, Futaba S.Bus2\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eStatus LED: \u003c\/b\u003eYes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFutaba and Multiplex systems do not offer configuration for wireless devices. Telemetry transmission is possible with the following fixed sensor slots:\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFutaba S.Bus2:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eAltitude: \u003c\/b\u003e19\u003cbr\u003e\n\u003cb\u003eVario: \u003c\/b\u003e18\u003cbr\u003e\n\u003cb\u003eNote: \u003c\/b\u003eManual detection in the menu Linkage – Sensor. Choose F1672 vario on slot \u003cb\u003e18\u003c\/b\u003e. Manual detection in the menu Linkage - Sensor. Choose F1672 vario in slot 18.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eMultiplex MSB\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eAltitude: \u003c\/b\u003e6\u003cbr\u003e\n\u003cb\u003eVario: \u003c\/b\u003e7\u003cbr\u003e\n\u003cb\u003eNote:\u003c\/b\u003e Automatically detected by the transmitter. Automatically detected by the transmitter.\u003c\/p\u003e","brand":"HEPF GmbH","offers":[{"title":"Default Title","offer_id":53441632829783,"sku":"HEVAR","price":49.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/HEVAR_b1_b9abd399-346e-4f69-8db8-bdc0fdea2ed4.jpg?v=1779899636"},{"product_id":"vario-hohe-sensor-fur-m-link-empfanger-multiplex-85416","title":"Vario\/Altitude Sensor for M-LINK Receivers, Multiplex # 85416","description":"","brand":"Multiplex Modellsp. GmbH\u0026Co.KG","offers":[{"title":"Default Title","offer_id":53445650415959,"sku":"M85416","price":85.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/M85416_b1_672d7a7a-6052-4a11-8985-ae2b79b814a6.jpg?v=1779805632"},{"product_id":"vario-und-hohensensor-sbs02a-fur-futaba-telemetrie","title":"Vario and Altitude Sensor SBS02A for Futaba Telemetry","description":"\u003ch1 style=\"text-align: center;\"\u003eVario and Altitude Sensor SBS02A for Futaba Telemetry\u003c\/h1\u003e\n\n\u003cp\u003eWith the Vario sensor SBS-02A, you can measure the altitude and climb\/sink rate of the model. Accuracy has been significantly improved compared to the SBS-01A. Usable only with Futaba telemetry-capable transmitters!\u003c\/p\u003e","brand":"FUTABA","offers":[{"title":"Default Title","offer_id":53445690818903,"sku":"MC-SBS-02A","price":33.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/MC-SBS-02A_b1.jpg?v=1780640278"},{"product_id":"gps-vario-und-hohen-sensor-sbs02g-fur-futaba-telemetrie","title":"GPS, Vario and Altitude Sensor SBS02G for Futaba Telemetry","description":"\u003ch1 style=\"text-align: center;\"\u003eGPS+Vario+Altitude-Sensor SBS02G\u003cbr\u003e\nRipmax \/ Futaba # SBS02G\u003c\/h1\u003e\n\n\u003cp\u003eSmall combination sensor consisting of a GPS and pressure sensor. The pressure sensor provides data for variometer and altitude measurement. The GPS sensor provides data for distance, speed and position.\u003cbr\u003e\nIt connects to the S.BUS2 input of Futaba telemetry receivers.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eSuitable for the following Futaba transmitters:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eT10J, T12K, T14SG, FX22, FX32, FX36, T16SZ, T18SZ, T18MZ, T32MZ\u003c\/p\u003e\n\n\u003cp\u003eThe new Version 2 is 10x more precise with T18MZ, T18MZWC, T16SZ, T18SZ transmitters.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eVario measuring range: -150m\/s …+150 m\/s\u003c\/li\u003e\n\t\u003cli\u003eVario resolution: approx. 10...100 cm\/s (depending on transmitter)\u003c\/li\u003e\n\t\u003cli\u003eAltitude measurement: -700 m ... +5500 m\u003c\/li\u003e\n\t\u003cli\u003eAltitude measurement resolution: 0.1...1 m (depending on transmitter)\u003c\/li\u003e\n\t\u003cli\u003eSpeed measurement: 0 ... 500 km\/h\u003c\/li\u003e\n\t\u003cli\u003eDistance measurement: 0 ... 5000 m\u003c\/li\u003e\n\t\u003cli\u003eDimensions: approx. 45 x 30 x 15 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: approx. 11 g\u003c\/li\u003e\n\t\u003cli\u003eOperating voltage: 3.7 ... 8.4 V\u003c\/li\u003e\n\t\u003cli\u003eCurrent consumption approx.: 100 mA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FUTABA","offers":[{"title":"Default Title","offer_id":53445690917207,"sku":"MC-SBS-02G","price":189.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/MC-SBS-02G_b1_4a5d91d3-520c-4396-9b3e-7eb9898b9f43.jpg?v=1779806285"},{"product_id":"pbs-vario-powerbox-6625","title":"PBS-Vario, PowerBox # 6625","description":"\u003ch1\u003e PBS-Vario, PowerBox # 6625\u003c\/h1\u003e\n\n\u003cp\u003eThe \u003cb\u003ePBS-Vario\u003c\/b\u003e works with a latest generation MEMS pressure sensor, enabling it to accurately measure height differences of 10cm. Thanks to a digital filter developed by \u003cb\u003ePowerBox-Systems\u003c\/b\u003e, the measured values are completely free of noise and delay. Both are important prerequisites for a precisely functioning variometer. In addition to the climb rate in m\/s, the \u003cb\u003ePBS-Vario\u003c\/b\u003e measures the relative height (from the starting point) with 0.1m resolution and the temperature in the sensor.\u003c\/p\u003e\n\n\u003cp\u003eWith its very compact design of just 33 x 10 x 4mm, the \u003cb\u003ePBS-Vario\u003c\/b\u003e can also be installed in the smallest glider fuselages.\u003c\/p\u003e\n\n\u003cp\u003eThe\u003cb\u003e PBS-Vario\u003c\/b\u003e can be used for \u003cb\u003ePowerBox CORE\u003c\/b\u003e, Jeti EXBUS and Futaba S.BUS2.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eProduct features:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eClimb rate measurement with 0.1m\/s accuracy\u003c\/li\u003e\n\t\u003cli\u003eAltitude measurement with 0.1m accuracy\u003c\/li\u003e\n\t\u003cli\u003eTemperature measurement\u003c\/li\u003e\n\t\u003cli\u003eSmall design\u003c\/li\u003e\n\t\u003cli\u003eLow weight\u003c\/li\u003e\n\t\u003cli\u003eSupports the following telemetry systems: PowerBox P²BUS, Jeti EX-Bus, Futaba S.BUS2\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOperating voltage: 4.0V - 9.0V\u003c\/li\u003e\n\t\u003cli\u003eCurrent consumption during operation: max. 20mA\u003c\/li\u003e\n\t\u003cli\u003eSupported remote control systems: PowerBox, Jeti, Futaba\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 33 x 10 x 4 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: 6g\u003c\/li\u003e\n\t\u003cli\u003eTemperature range: -30°C to +85°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"PowerBox Systems DEUTSCH","offers":[{"title":"Default Title","offer_id":53445700813143,"sku":"MD6625","price":66.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/MD6625_b1.jpg?v=1779902743"},{"product_id":"hohen-sensor-zu-master-telemetrie-empfanger-pichler-c9024","title":"Altitude Sensor for MASTER Telemetry Receiver, Pichler # C9024","description":"\u003ch1 style=\"text-align: center;\"\u003eAltitude Sensor for MASTER Telemetry Receiver\u003cbr\u003e\nPichler # C9024\u003c\/h1\u003e\n\n\u003cp\u003eAltitude sensor for the MASTER GigaProp 6 remote control system. With this altimeter, you always have the current flight altitude of your model in view on the transmitter display.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAltitude display in meters\u003c\/li\u003e\n\t\u003cli\u003eEasy zeroing possible\u003c\/li\u003e\n\t\u003cli\u003eExtremely easy installation, simply plug into the receiver\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PICHLER Modellbau GmbH","offers":[{"title":"Default Title","offer_id":53446006571351,"sku":"PIC9024","price":16.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/PIC9024_b1_bb5b2a31-1ce4-415b-8165-674151a2292b.jpg?v=1779812800"},{"product_id":"micro-vario-mit-tek-sm-modellbau-3200","title":"Micro-Vario, with TEK, SM-Modellbau # 3200","description":"\u003ch1\u003eMicro-Vario, with TEK SM-Modellbau # 3200\u003c\/h1\u003e\n\n\u003cp\u003eThe new Micro-Vario from SM-Modellbau - extremely small and extremely light! At only 1.8g without cables, the MicroVario offers a high-quality TEK vario with two pressure sensors and an accelerometer!\u003c\/p\u003e\n\n\u003cp\u003eThe MicroVario uses a built-in high-resolution pressure sensor to provide a high-quality vario via telemetry and also allows the use of compensation nozzles with the integrated TEK connection. This provides a vario function that very accurately displays real ascent and descent, independent of \"stick thermals\". For precise altitude measurement, even when operating with a TEK nozzle, a second pressure sensor is installed, which provides correct altitude data independently of speed.\u003c\/p\u003e\n\n\u003cp\u003eThe built-in 3-axis accelerometer with a measuring range of up to 16g provides valuable information about stresses during flight.\u003c\/p\u003e\n\n\u003cp\u003eAll MicroVario measurements can be viewed live directly on the UniDisplay. All settings and alarms can, of course, also be conveniently programmed via the display.\u003c\/p\u003e\n\n\u003cp\u003eIn accordance with SM-Modellbau's philosophy of supporting as many systems as possible, the MicroVario also speaks the telemetry of:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eJeti Duplex\u003c\/li\u003e\n\t\u003cli\u003eMultiplex M-Link\u003c\/li\u003e\n\t\u003cli\u003eGraupner HoTT\u003c\/li\u003e\n\t\u003cli\u003eFutaba\u003c\/li\u003e\n\t\u003cli\u003eJR DMSS\u003c\/li\u003e\n\t\u003cli\u003eFrSky\u003c\/li\u003e\n\t\u003cli\u003eSpektrum (via Spektrum adapter)\u003c\/li\u003e\n\t\u003cli\u003ePowerBox Core\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe telemetry system used only needs to be specified once in the MicroVario settings. This is done either via our PC program \"SM MicroVario Tool\" or with the UniDisplay. HoTT is selected in the factory settings.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eAnd this is what the MicroVario can do:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ehigh-resolution vario with TEK connection\u003c\/li\u003e\n\t\u003cli\u003ealtitude measurement with a second pressure sensor with automatic zero setting after switching on\u003c\/li\u003e\n\t\u003cli\u003eintegrated 3-axis accelerometer up to +- 16 g\u003c\/li\u003e\n\t\u003cli\u003efull telemetry support for Jeti Duplex (EX), Multiplex M-Link, Graupner HoTT, Futaba FASSTest S.BUS2, JR DMSS, FrSky, Spektrum, and PowerBox Core\u003c\/li\u003e\n\t\u003cli\u003econnection for receiver signal for remote control of certain functions\u003c\/li\u003e\n\t\u003cli\u003emeasurement of receiver battery voltage\u003c\/li\u003e\n\t\u003cli\u003ecurrent status indicated by LED\u003c\/li\u003e\n\t\u003cli\u003edirect live viewing of measurements with our UniDisplay\u003c\/li\u003e\n\t\u003cli\u003eparameter settings possible via PC, UniDisplay, and telemetry\u003c\/li\u003e\n\t\u003cli\u003efree firmware updates via PC with our USB interface (item no. SM2550) or with existing USB connection cables such as those from Jeti, Multiplex, or Graupner\u003c\/li\u003e\n\t\u003cli\u003edue to its compact size and low weight, it can be used almost anywhere\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eVario resolution: 0.01m\/s\u003c\/li\u003e\n\t\u003cli\u003eVario noise: typ. less than 0.02m\/s\u003c\/li\u003e\n\t\u003cli\u003eAltitude measurement resolution: 0.1m\u003c\/li\u003e\n\t\u003cli\u003eAccelerometer: 3 axes up to 16 g\u003c\/li\u003e\n\t\u003cli\u003ePower supply: from receiver voltage (from 3.6V to max. 8.5V)\u003c\/li\u003e\n\t\u003cli\u003eCurrent consumption: approx. 24 mA\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 26mm (with plug 33mm) x 12mm x 7mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: 1.8 gr. without cable, 5.4 gr. with 30 cm connection cable\u003c\/li\u003e\n\t\u003cli\u003eConnections: 1 x connection for telemetry and power supply (\"Link\")\u003cbr\u003e\n\t                  1 x servo pulse input from receiver\u003cbr\u003e\n\t                  COM connection for UniDisplay and firmware update\u003cbr\u003e\n\t                  Connection for TEK nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMicroVario \u003c\/li\u003e\n\t\u003cli\u003eConnection cable to the receiver\u003c\/li\u003e\n\t\u003cli\u003edetailed colored instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448710685015,"sku":"SM3200","price":46.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM3200_b1.jpg?v=1779935526"},{"product_id":"linkvario-pro-speziell-fur-jeti-duplex-telemetrie","title":"LinkVario Pro, specifically for Jeti Duplex Telemetry","description":"\u003ch1\u003eLinkVario Pro, especially for Jeti Duplex Telemetry\u003c\/h1\u003e\n\n\u003cp\u003eLinkVario Pro is the successor to the well-known LinkVario, specially designed for Jeti Duplex telemetry.\u003cbr\u003e\nLinkVario Pro is a high-resolution variometer for demanding applications with very high stability and can also be operated with a TEK nozzle.\u003cbr\u003e\nIt features connections for motor current\/voltage, RPM, additional current measurement, temperature, and Pitot speed sensors. A GPS module can also be connected. The LinkVario Pro corresponds to the well-known LinkVario Duo version.\u003cbr\u003e\nThe LinkVario Pro for Jeti Duplex offers a variety of possibilities. One example is the variometer time constant, which can be controlled via a channel.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448713077079,"sku":"SM4000","price":142.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM4000_b1_14ccc470-2393-45d2-aa96-306c58411387.jpg?v=1779817927"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/collections\/MD6625_b1_0e9a0c76-e015-4cc4-a4bc-b19dee1f7d5a.jpg?v=1771331719","url":"https:\/\/hoelleinshop.com\/en\/collections\/fernsteuerungen-zubehor-telemetrie-vario.oembed","provider":"hoelleinshop","version":"1.0","type":"link"}