{"title":"Electronics","description":"","products":[{"product_id":"bavarian-demon-3x-fbl-stabisystem-captron-92757","title":"Bavarian Demon 3X, FBL stabilization system, Captron # 92757","description":"\u003ch1 style=\"text-align: center;\"\u003eBavarianDEMON 3X, FBL Stabilization System, Captron # 92757\u003c\/h1\u003e\n\n\u003cp\u003eThe BavarianDEMON 3X is specifically aimed at all extreme 3D pilots, but also at all other flybarless flyers. The latest sensor technology combined with intelligent software algorithms enable unprecedented performance in all areas of flybarless helicopters, from electric to nitro to turbine. Heli models without flybar (flybarless) are much more agile and maneuverable due to their lower weight and have approx. 15% more power. Together with the BavarianDEMON 3X, this results in gigantic performance. On top of that, the adjustment work on the delicate paddle mechanism is eliminated.\u003c\/p\u003e\n\n\u003cp\u003eA BavarianDEMON naturally comes from Bavaria. This applies to the brand, the entire technology, research, management and, of course, the product. A key source of the BavarianDEMON's reliability is the many years of experience with the HeliCommand series.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFacts:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eSymmetrical torque control\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eCan be used in all flybarless RC helicopter types\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eSupports all common servo types and swashplate variants, as well as virtual swashplate rotation\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eCNC-milled aluminum housing\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eFlexible mounting options, horizontal or vertical\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eIntelligent setup wizard\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eRealTime tuning for in-flight parameter optimization\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eOnline updateable\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eInternal swashplate mixer\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eUltra-fast tail gyro\u003c\/p\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBD 3-X including mounting material\u003c\/li\u003e\n\t\u003cli\u003e\n\t\u003cp\u003eConnection cable harness to receiver (90 mm)\u003c\/p\u003e\n\t\u003c\/li\u003e\n\t\u003cli\u003eUSB cable for direct connection to PC\/notebook\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cu\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e\n\u003cb\u003eOperating voltage:\u003c\/b\u003e 4...10 V\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e approx. 18 g\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eDimensions:\u003c\/b\u003e 36 x 34 x 14mm\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eTail rotation rate max:\u003c\/b\u003e 650°\/s\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eRoll \u0026 Pitch rotation rate max:\u003c\/b\u003e 500°\/s (typical)\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eServo - Frame rate:\u003c\/b\u003e 55 Hz \/ 220 Hz selectable.\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eTail servo output:\u003c\/b\u003e 1500µs \/ 760µs selectable\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eServo currents maximum:\u003c\/b\u003e Total 10 A continuous\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CAPTRON Electronic GmbH","offers":[{"title":"Default Title","offer_id":53440038502743,"sku":"CP92757","price":184.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/CP92757_b1.jpg?v=1779787943"},{"product_id":"klebepads-acro-3-stuck-zu-bavarian-demon-3sx-sx-und-cortex","title":"Adhesive Pads Acro (3 pieces) for Bavarian Demon 3SX, SX and Cortex","description":"\u003ch1 style=\"text-align: center;\"\u003eAdhesive Pads ACRO (3 pieces) for Bavarian Demon 3SX, 3X and Cortex\u003c\/h1\u003e\n\n\u003cp\u003e3 pcs. adhesive pads, hard. Suitable for Bavarian Demon 3SX, 3X and CORTEX. Recommended for use with electric and turbine drives!\u003c\/p\u003e","brand":"CAPTRON Electronic GmbH","offers":[{"title":"Default Title","offer_id":53440038535511,"sku":"CP92769","price":5.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/CP92769_b1.jpg?v=1780301724"},{"product_id":"klebepads-soft-3-stuck-zu-bavarian-demon-3sx-3x-und-cortex","title":"Adhesive Pads Soft (3 pieces) for Bavarian Demon 3SX, 3X, and Cortex","description":"\u003ch1 style=\"text-align: center;\"\u003eSoft Adhesive Pads (3 pieces) for Bavarian Demon 3SX, 3X and Cortex\u003c\/h1\u003e\n\n\u003cp\u003e3 pcs. adhesive pads, soft. Suitable for Bavarian Demon 3SX, 3X and CORTEX. For use with internal combustion engines.\u003c\/p\u003e\n\n\u003cp\u003eFor electric, nitro, and turbine drives, the hard adhesive pad 'Acro' is recommended!\u003c\/p\u003e","brand":"CAPTRON Electronic GmbH","offers":[{"title":"Default Title","offer_id":53440038764887,"sku":"CP92770","price":5.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/CP92770_b1_8438f026-4c85-4641-a7c3-5ea0d6d8f9d6.jpg?v=1777555443"},{"product_id":"bavarian-demon-axon-heli-stabilisierungssystem-captron-96023","title":"Bavarian Demon AXON, Heli Stabilization System, CAPTRON # 96023","description":"\u003ch1 style=\"text-align: center;\"\u003eBavarian Demon AXON, Heli Stabilization System, CAPTRON # 96023\u003c\/h1\u003e\n\n\u003cp\u003eAXON, the next step from Bavarian Demon, once again impresses with ingenious highlights. Programming is no longer tied to a PC and can be conveniently done at the airfield using an iOS and Android app. The red anodized aluminum housing ignites pure passion and will captivate you.\u003cbr\u003e\nNevertheless, the technical side is also very impressive. Easy operation, intelligent vibration control, governor function, 3 parameter banks, multiple horizon and rescue modes, and all MADE in Germany.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eUltra-precise flight control\u003c\/li\u003e\n\t\u003cli\u003eLatest 32-bit technology\u003c\/li\u003e\n\t\u003cli\u003eMultiple horizon and rescue modes\u003c\/li\u003e\n\t\u003cli\u003e3 parameter banks\u003c\/li\u003e\n\t\u003cli\u003eInternal RPM governor\u003c\/li\u003e\n\t\u003cli\u003eIntelligent vibration control\u003c\/li\u003e\n\t\u003cli\u003eiOS and Android App\u003c\/li\u003e\n\t\u003cli\u003eMulti-protocol input\u003c\/li\u003e\n\t\u003cli\u003eFuture-proof with online updates\u003c\/li\u003e\n\t\u003cli\u003ePrepared with sensor bus\u003c\/li\u003e\n\t\u003cli\u003eJeti integration possible\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eNew DESIGN\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eFiery red sensor unit\u003c\/li\u003e\n\t\u003cli\u003eExtravagant X-design (housing)\u003c\/li\u003e\n\t\u003cli\u003eHousing made of anodized aluminum (CNC-milled)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eAxon\u003c\/li\u003e\n\t\u003cli\u003eOne 'Acro' and one 'Soft' ACP adhesive pad each\u003c\/li\u003e\n\t\u003cli\u003eConnection cable harness to receiver (150mm)\u003c\/li\u003e\n\t\u003cli\u003eMini-USB cable\u003c\/li\u003e\n\t\u003cli\u003eProduct information\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CAPTRON Electronic GmbH","offers":[{"title":"Default Title","offer_id":53440039518551,"sku":"CP96023","price":306.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/CP96023_b1.jpg?v=1779788006"},{"product_id":"klebepads-acro-acp-zu-bavarian-demon-axon-und-cortex-pro","title":"Adhesive pads Acro ACP for Bavarian Demon AXON and Cortex Pro","description":"\u003cp\u003eAdhesive Pads Acro ACP for Bavarian Demon AXON and Cortex Pro\u003c\/p\u003e","brand":"CAPTRON Electronic GmbH","offers":[{"title":"Default Title","offer_id":53440040010071,"sku":"CP96097","price":5.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/CP96097_b1.jpg?v=1780040888"},{"product_id":"klebepads-soft-acp-zu-bavarian-demon-axon-und-cortex-pro","title":"Adhesive pads Soft ACP for Bavarian Demon AXON and Cortex Pro","description":"","brand":"CAPTRON Electronic GmbH","offers":[{"title":"Default Title","offer_id":53440041288023,"sku":"CP96098","price":5.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/CP96098_b1_0244f0e5-8a01-44a0-8449-b4ccea3e463d.jpg?v=1780041523"},{"product_id":"kabelbaum-l150-acp-150mm-zu-bavarian-demon-axon-und-cortex-pro","title":"Wiring harness L150 ACP (150mm) to Bavarian Demon AXON and Cortex PRO","description":"\u003ch1\u003eHarness L150 ACP (150mm) to Bavarian Demon AXON and Cortex PRO\u003c\/h1\u003e","brand":"CAPTRON Electronic GmbH","offers":[{"title":"Default Title","offer_id":53440041320791,"sku":"CP96099","price":17.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/CP96099_b1.jpg?v=1779788016"},{"product_id":"kabelbaum-l250-acp-250mm-zu-bavarian-demon-axon-und-cortex-pro","title":"Wire harness L250 ACP (250mm) to Bavarian Demon AXON and Cortex PRO","description":"\u003ch1 style=\"text-align: center;\"\u003eHarness L250 ACP (250mm) to Bavarian Demon Axon and Cortex PRO\u003c\/h1\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1 pc. 250mm wiring harness suitable for Bavarian Demon Axon and CORTEX PRO.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"CAPTRON Electronic GmbH","offers":[{"title":"Default Title","offer_id":53440041353559,"sku":"CP96100","price":18.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/CP96100_b1.jpg?v=1779788024"},{"product_id":"bavarian-demon-gov-sensor-e8-drehzahlsensor-fur-axon","title":"Bavarian Demon GOV SENSOR E8, RPM sensor for Axon","description":"\u003ch1 style=\"text-align: center;\"\u003eBavarian Demon GOV Sensor E8, Speed Sensor for Axon\u003c\/h1\u003e\n\n\u003cp\u003eThe Bavarian Demon GOV Sensor E8 is a speed sensor for electric helicopters. It was specially developed for use with the governor of the AXON FBL system. The sensor is simply connected via any motor cable. A specially developed sampling method ensures extremely reliable and precise detection of the motor speed, directly at the source.\u003c\/p\u003e","brand":"CAPTRON Electronic GmbH","offers":[{"title":"Default Title","offer_id":53440041386327,"sku":"CP96585","price":62.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/CP96585_b1.jpg?v=1779788034"},{"product_id":"b-modul-zu-bavarian-demon-axon-und-cortex-pro","title":"B-module for Bavarian Demon AXON and Cortex Pro","description":"\u003ch1 style=\"text-align: center;\"\u003e\u003cb\u003eB-Module for Bavarian Demon AXON and Cortex Pro\u003c\/b\u003e\u003c\/h1\u003e\n\n\u003cp\u003eBluetooth module for programming the AXON and CORTEXpro via Android\/iOS app.\u003c\/p\u003e\n","brand":"CAPTRON Electronic GmbH","offers":[{"title":"Default Title","offer_id":53440041582935,"sku":"CP96845","price":74.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/CP96845_b1.jpg?v=1779788044"},{"product_id":"ble2sys-bluetooth-smart-interface-fur-beast-stabilisierungssystem","title":"BLE2SYS Bluetooth Smart Interface for BEAST Stabilization System","description":"\u003ch1 style=\"text-align: center;\"\u003e\u003cb\u003eBLE2SYS Bluetooth Smart Interface for BEAST\u003cbr\u003e\nStabilization System\u003c\/b\u003e\u003c\/h1\u003e\n\n\u003cp\u003eMake your MICROBEAST PLUS even smarter!\u003c\/p\u003e\n\n\u003cp style=\"text-align: justify;\"\u003eThe BLE2SYS Bluetooth Smart Interface now features BLE v5* (Bluetooth Low Energy V5.0) and enables wireless configuration of MICROBEAST PLUS \/ MICROBEAST PLUS HD with a smartphone or tablet.\u003cbr\u003e\nWith the StudioXm app, you can easily change settings and parameters via your mobile device, create backups of your settings, load pre-configured heli presets, upload firmware updates to the device, and much more.\u003c\/p\u003e\n\n\u003cp style=\"text-align: justify;\"\u003e* Please note that a Bluetooth Smart\/Bluetooth LE compatible device is required.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Specifications:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOperating voltage: 4.8V - 8.4V\u003c\/li\u003e\n\t\u003cli\u003eMaximum range: 10m\u003c\/li\u003e\n\t\u003cli\u003eInterface: Bluetooth (BLE v5)\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 42.5x16x4.5mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: 2.9g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1x BLE2SYS (BLE v5)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Freakware","offers":[{"title":"Default Title","offer_id":53440605782359,"sku":"FW-BXA76404","price":37.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/FW-BXA76404_b1.jpg?v=1779792477"},{"product_id":"microbeast-ultra-fbl-stabilisierungssystem-fur-helikopter","title":"Microbeast Ultra, FBL Stabilization System for Helicopters","description":"\u003ch1 style=\"text-align: center;\"\u003eMicrobeast Ultra, FBL Stabilization System for Helicopters\u003c\/h1\u003e\n\n\u003cp\u003eThe MICROBEAST Ultra is the result of over 10 years of development and realization of stabilization systems for RC helicopters. It combines all the features of the previously released BEASTX systems and is prepared for the future with a modern ARM Cortex MPU providing even more computing power and memory capacity.\u003c\/p\u003e\n\n\u003cp\u003eWhat can the MICROBEAST Ultra do?\u003cbr\u003e\nThe MICROBEAST² is a control unit for RC model helicopters. Thanks to the integrated gyroscopes, the helicopter is largely stabilized so that it only follows the pilot's control commands. Almost all commercially available remote control systems are supported, and newly released systems can be continuously updated through the update option.\u003c\/p\u003e\n\n\u003cp\u003eThe system can be expanded with additional useful functions via paid upgrades. A telemetry connection is available, where the MICROBEAST ULTRA acts as an interface between various sensor systems and remote control standards. With AttitudeControl, we offer additional attitude stabilization and model recovery for flight training and beginner instruction. Bank switching allows the system to be maximally adapted to the pilot's requirements via different parameter sets that can be called up during flight.\u003cbr\u003e\nThe system can be configured using the comprehensive StudioX App, which is available for almost all platforms (requires an additional USB or Bluetooth interface). For those who like it \"old school,\" it can also be used entirely without a smartphone or interface. Most functions, as with the first MICROBEAST, can be set up using a button on the device and the remote control with the help of LEDs.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eA remote control transmitter with at least 6 channels is required (5 control functions + motor throttle).\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003cb\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOperating voltage: 3.5V - 8.5V DC (operation with 2-cell LiPo possible)\u003c\/li\u003e\n\t\u003cli\u003eProcessor: ARM Cortex\u003c\/li\u003e\n\t\u003cli\u003eSensor: 6-axis MEMS (Gyro + Accelerometer)\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 36x25x14mm\u003c\/li\u003e\n\t\u003cli\u003eWeight (without cables): approx. 11g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMICROBEAST ULTRA\u003c\/li\u003e\n\t\u003cli\u003eReceiver connection cable set\u003c\/li\u003e\n\t\u003cli\u003e3M adhesive pads\u003c\/li\u003e\n\t\u003cli\u003eAdjustment tool\u003c\/li\u003e\n\t\u003cli\u003eAdapter cable SRXL2 Microbeast\u003c\/li\u003e\n\t\u003cli\u003eAdapter cable Telemetry Microbeast\u003c\/li\u003e\n\t\u003cli\u003eDecal sheet\u003c\/li\u003e\n\t\u003cli\u003eManual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Freakware","offers":[{"title":"Default Title","offer_id":53440606110039,"sku":"FW-BXM76542","price":151.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/FW-BXM76542_b1.jpg?v=1779792487"},{"product_id":"nanobeast-fbl-stabilisierungssystem-fur-klein-und-microhelikopter","title":"NANObeast, FBL stabilization system for small and micro helicopters","description":"\u003ch1 style=\"text-align: center;\"\u003eNANObeast PLUS, FBL Stabilization System for Helicopters\u003c\/h1\u003e\n\n\u003cp\u003eThe NANOBEAST is a control unit for small and very small RC model helicopters without a flybar (paddles). The integrated gyro elements largely stabilize the helicopter, so it only follows the pilot's control commands. The control feel can be adjusted from tame to extremely agile. This allows the model to meet almost all pilot requirements, whether beginner or 3D professional.\u003cbr\u003e\nA paid firmware upgrade can expand the system to the \"ProEdition\". This offers additional functions such as AttitudeControl for attitude stabilization and rescue of the model in an unsafe flight attitude, as well as bank switching, which allows switching between different parameter sets during flight.\u003c\/p\u003e\n\n\u003cp\u003eA computer (Windows\/mac), a smartphone or tablet (iOS\/Android) with Bluetooth LE is required for basic setup and tuning of the system. Depending on the technology used, a USB2SYS (for computer) or BLE2SYS (for smartphone\/tablet) interface is required. This is not included and must be purchased separately! Configuration is then done via the StudioX software, which is available for free download.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eSupported Receiver Types\/Transmission Protocols:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSRXL: JR® XBus (Mode B), Multiplex® SRXL (V1+V2), Jeti® UDI, Graupner\/SJ® HOTT SUMD, Spektrum® SRXL\u003c\/li\u003e\n\t\u003cli\u003eFutaba® SBUS\u003c\/li\u003e\n\t\u003cli\u003eSingle satellite (Spektrum® DSM2\/DSMX, JR® RJ-01 DMSS)\u003c\/li\u003e\n\t\u003cli\u003eJeti® EXBUS\u003c\/li\u003e\n\t\u003cli\u003eALIGN\/FlySky iBus\u003c\/li\u003e\n\t\u003cli\u003ePPM Sum Signal (SPPM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eReceiver connections: Spektrum®\/JR® single satellite, sum signal connection for Graupner® HOTT, Futaba® SBus, Jeti® exBus, FlySky® iBus, FrSky® SRXL, Multiplex® SRXL, JR® XBus (B), Spektrum® SRXL, Align® iBus, SPPM sum signal\u003c\/li\u003e\n\t\u003cli\u003eInput voltage: 4.8V to 6.0V\u003c\/li\u003e\n\t\u003cli\u003eRecommended heli size: 180 - 250 electric heli\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 32x20x10mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: 5.8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1x NANOBEAST control unit\u003c\/li\u003e\n\t\u003cli\u003e1x Patch cable for sum signal receivers\u003c\/li\u003e\n\t\u003cli\u003e2x Adhesive pad\u003c\/li\u003e\n\t\u003cli\u003e1x Manual\u003c\/li\u003e\n\t\u003cli\u003e1x Decal sheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Freakware","offers":[{"title":"Default Title","offer_id":53440606273879,"sku":"FW-BXM76900","price":75.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/FW-BXM76900_b1.jpg?v=1779792497"},{"product_id":"kontronik-kolibri-60-lv-i-brushless-regler-2-6s-60a-10a-bec","title":"Kontronik KOLIBRI 60 LV-I brushless ESC, 2-6S, 60A, 10A BEC","description":"\u003ch1\u003eKontronik KOLIBRI 60 LV-I brushless ESC, 2-6S, 60A, 10A BEC\u003c\/h1\u003e\n\n\u003cp\u003eThe Kolibri 60 LV-I is characterized by high and stable performance. As always with KONTRONIK, these controllers also have reliable protection functions. The software is based on that of the premium KOSMIK controller, ensuring that the KOLIBRI has optimal control behavior. The well-known soft start and versatile mode programming are also familiar from the premium segment.\u003cbr\u003e\nAnother highlight is the \u003cb\u003eintegrated telemetry function.\u003c\/b\u003e \u003cb\u003eWithout\u003c\/b\u003e further accessories, telemetry data is output for the brands Futaba, Multiplex, Graupner, Mikado and Jeti \u003cb\u003e(only with direct connection to the telemetry input on the receiver).\u003cbr\u003e\nIn addition, a powerful BEC up to 9 V and 10 A continuous current \/ 30 A short-term is integrated. Of course, the 60 LV is Bluetooth-enabled (add-on required) and online-update-capable (Progunit required)\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SOBEK Drives GmbH","offers":[{"title":"Default Title","offer_id":53445274730839,"sku":"K04320","price":176.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/K04320_b1.jpg?v=1779924946"},{"product_id":"kontronik-kolibri-90-lv-i-brushless-regler-2-6s-90a-10a-bec","title":"Kontronik KOLIBRI 90 LV-I Brushless ESC, 2-6S, 90A, 10A BEC","description":"\u003ch1\u003eKontronik KOLIBRI 90 LV-I Brushless Controller, 2-6S, 90A, 10A BEC\u003c\/h1\u003e\n\n\u003cp\u003eThe Kolibri 90 LV-I is characterized by high and stable performance. As always with KONTRONIK, these controllers also have reliable protection functions. The software is based on that of the premium KOSMIK controller, so the KOLIBRI offers optimal control behavior. The well-known soft start and versatile mode programming are also known from the premium segment.\u003cbr\u003e\nAnother highlight is the \u003cb\u003eintegrated telemetry function.\u003c\/b\u003e \u003cb\u003eWithout\u003c\/b\u003e additional accessories, telemetry data is output for the brands Futaba, Multiplex, Graupner, Mikado and Jeti \u003cb\u003e(only with direct connection to the telemetry input on the receiver).\u003cbr\u003e\nIn addition, a powerful BEC up to 9 V and 10 A continuous current \/ 30 A short-term is integrated. Of course, the 90 LV-I is Bluetooth-enabled (add-on required) and online-updatable (Progunit required). \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SOBEK Drives GmbH","offers":[{"title":"Default Title","offer_id":53445275025751,"sku":"K04330","price":201.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/K04330_b1_df7455b6-c3b6-433e-9948-2030076385ba.jpg?v=1780861414"},{"product_id":"kontronik-kolibri-140-lv-i-brushless-regler-2-6s-140a-10a-bec","title":"Kontronik KOLIBRI 140 LV-I Brushless ESC, 2-6S, 140A, 10A BEC","description":"\u003ch1\u003eKontronik KOLIBRI 140 LV-I brushless ESC, 2-6S, 140A, 10A BEC\u003c\/h1\u003e\n\n\u003cp\u003eThe Kolibri 140 LV-I is characterized by high and stable performance. As always with KONTRONIK, these ESCs also have reliable protective functions. The software is based on that of the KOSMIK premium ESC, so the KOLIBRI has optimal control behavior. The well-known soft start and the versatile mode programming are also known from the premium segment.\u003cbr\u003e\nAnother highlight is the \u003cb\u003eintegrated telemetry function.\u003c\/b\u003e \u003cb\u003eWithout\u003c\/b\u003e additional accessories, telemetry data is output for the brands Futaba, Multiplex, Graupner, Mikado and Jeti \u003cb\u003e(only when connected directly to the telemetry input on the receiver). \u003cbr\u003e\nIn addition, a powerful BEC up to 9 V and 10 A continuous current \/ 30 A short-term is integrated. Of course, the 140 LV-I is Bluetooth-enabled (additional accessory required) and online-update-capable (Progunit required). \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SOBEK Drives GmbH","offers":[{"title":"Default Title","offer_id":53445275058519,"sku":"K04340","price":277.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/K04340_b1.jpg?v=1779900484"},{"product_id":"kontronik-kolibri-90-hv-i-brushless-regler-6-12s-90a-10-30a-bec","title":"Kontronik KOLIBRI 90 HV-I Brushless ESC, 6 - 12S, 90A, 10\/30A BEC","description":"\u003ch1\u003eKontronik KOLIBRI 90 HV-I Brushless Controller, 6 - 12S, 90A, 10\/30A BEC\u003c\/h1\u003e\n\n\u003cp\u003eThe Kolibri 90 HV-I is characterized by high and stable performance. As always with KONTRONIK, these controllers also have reliable protection functions. The software is based on that of the premium controller KOSMIK, so the KOLIBRI has optimal control behavior. The well-known soft start and the versatile mode programming are also known from the premium segment.\u003cbr\u003e\nAnother highlight is the \u003cb\u003eintegrated telemetry function.\u003c\/b\u003e \u003cb\u003eWithout\u003c\/b\u003e further accessories, telemetry data is output for Futaba, Multiplex, Graupner, Mikado, and Jeti \u003cb\u003e(only with direct connection to the telemetry input on the receiver).\u003cbr\u003e\nIn addition, a powerful BEC up to 9 V and 10 A continuous current \/ 30 A short-term is integrated. Of course, the 90 HV-I is Bluetooth-enabled (\u003cb\u003eadditional module required) and online-updatable (\u003cb\u003eProgunit required). \u003c\/b\u003e\u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SOBEK Drives GmbH","offers":[{"title":"Default Title","offer_id":53445275156823,"sku":"K04350","price":337.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/K04350_b1_bd4b28bb-4b5b-4114-a889-d241522dd51f.jpg?v=1779799922"},{"product_id":"kontronik-kolibri-140-hv-i-brushless-regler-6-12s-140a-10-30a-bec","title":"Kontronik KOLIBRI 140 HV-I Brushless ESC, 6 - 12S, 140A, 10\/30A BEC","description":"\u003ch1\u003eKontronik KOLIBRI 140 HV-I Brushless ESC, 6-12S, 140A, 10\/30A BEC\u003c\/h1\u003e\n\n\u003cp\u003eThe Kolibri 140 HV-I is characterized by high and stable performance. As always with KONTRONIK, these ESCs also have reliable protection functions. The software is based on that of the premium KOSMIK ESC, so the KOLIBRI has optimal control behavior. The well-known soft start and the versatile mode programming are also familiar from the premium segment.\u003cbr\u003e\nAnother highlight is the \u003cb\u003eintegrated telemetry function.\u003c\/b\u003e \u003cb\u003eWithout\u003c\/b\u003e further accessories, telemetry data is output for the brands Futaba, Multiplex, Graupner, Mikado and Jeti \u003cb\u003e(only with direct connection to the telemetry input on the receiver).\u003cbr\u003e\nIn addition, a powerful BEC up to 9 V and 10 A continuous current \/ 30 A short-term is integrated. Of course, the 140 HV-I is Bluetooth-enabled (\u003cb\u003eadditional accessory required) and online-update-capable (\u003cb\u003eProgunit required).\u003c\/b\u003e\u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SOBEK Drives GmbH","offers":[{"title":"Default Title","offer_id":53445275287895,"sku":"K04360","price":478.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/K04360_b1_7c15fa4f-5ea8-4dbf-ae7b-b437fe88cbfc.jpg?v=1779799938"},{"product_id":"v-stabi-patchkabel-120mm-lang-ve-4","title":"V-Stabi patch cable, 120mm long, pack of 4","description":"","brand":"Mikado Model Helicopters GmbH","offers":[{"title":"Default Title","offer_id":53445704417623,"sku":"MH04141","price":11.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/MH04141_b1.jpg?v=1779926659"},{"product_id":"klebepad-fur-vstabi-100x50x1-2mm","title":"Adhesive pad for VStabi 100x50x1.2mm","description":"","brand":"Mikado Model Helicopters GmbH","offers":[{"title":"Default Title","offer_id":53445705072983,"sku":"MH04613","price":3.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/MH04613_b1_76fcca72-c6a6-4e7c-b5b8-a3de6a06dae1.jpg?v=1779926709"},{"product_id":"vbar-control-scorpion-esc-kabel-350mm","title":"VBar Control\/Scorpion ESC cable, 350mm","description":"","brand":"Mikado Model Helicopters GmbH","offers":[{"title":"Default Title","offer_id":53445706449239,"sku":"MH05088","price":7.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/MH05088_b1_082afba9-87e7-4fb0-92bd-d2055b44077f.jpg?v=1779806938"},{"product_id":"vstabi-evo-vlink-7-x-express","title":"VStabi EVO VLink 7.x Express","description":"\u003ch1 style=\"text-align: center;\"\u003eVStabi EVO VLink 7.x Express\u003c\/h1\u003e\n\n\u003cp\u003e\u003cb\u003eHighlights:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eNew processor: 500 MHz (NEO: 98 MHz), more memory, FPU, highest performance currently available on the market\u003c\/li\u003e\n\t\u003cli\u003eInnovative step-up\/step-down power supply from 2 V to 16 V at full power with high efficiency (only slight heating)\u003c\/li\u003e\n\t\u003cli\u003eFull telemetry and range down to 2 V operating voltage\u003c\/li\u003e\n\t\u003cli\u003eImproved high-frequency technology for high performance and sensitivity\u003c\/li\u003e\n\t\u003cli\u003eDual sensor system based on proven technology and new sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eThe hardware allows new performance data: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eFrame rates adjustable up to 1 kHz (1 ms) on the main rotor and 0.5 ms on the tail\u003c\/li\u003e\n\t\u003cli\u003eSpeed governor up to 1 kHz frame rate\u003c\/li\u003e\n\t\u003cli\u003eSelection of pulse widths from 1.5 ms to 125 µS as well as digital high-speed protocols\u003c\/li\u003e\n\t\u003cli\u003eImprovements in the algorithm: adaptations to the new frame rates, digital filtering extended with new options\u003c\/li\u003e\n\t\u003cli\u003eDynamic bank-dependent swashplate rotation\u003c\/li\u003e\n\t\u003cli\u003eNew \"Tail Torque Extension\" for motor-driven tails, more control with an unloaded tail\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mikado Model Helicopters GmbH","offers":[{"title":"Default Title","offer_id":53445706678615,"sku":"MH05539","price":209.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/MH05539_b1_3e23c527-5da7-4e4b-80c0-e2c09add442d.jpg?v=1779806955"},{"product_id":"hauptmotor-silber-zu-helicopter-m2-evo-oshm2317w","title":"Main motor SILVER for Helicopter M2 EVO, # OSHM2317W","description":"","brand":"Kavan","offers":[{"title":"Default Title","offer_id":53445889229143,"sku":"PD-OSHM2317W","price":56.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/PD-OSHM2317W_b1_538a49fd-f273-455a-b288-fefd0357f8f6.jpg?v=1779810557"},{"product_id":"hauptmotor-gelb-zu-helicopter-m2-evo-oshm2317y","title":"Main Motor YELLOW for Helicopter M2 EVO, # OSHM2317Y","description":"","brand":"Kavan","offers":[{"title":"Default Title","offer_id":53445889261911,"sku":"PD-OSHM2317Y","price":56.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/PD-OSHM2317Y_b1_c62c566b-e36e-44d6-80e2-755090104332.jpg?v=1779810566"},{"product_id":"hobbywing-platinum-brushless-regler-80a-v5-3-8s-8-20a-hv-bec-hw30203201","title":"Hobbywing Platinum Brushless ESC 80A V5, 3-8S, 8\/20A HV BEC, # HW30203201","description":"\u003ch1 style=\"text-align: center;\"\u003eHobbywing Platinum Brushless ESC 80A V5, 3-8S, 8\/20A HV BEC, # HW30203201\u003c\/h1\u003e\n\n\u003cp\u003eThe Platinum V5 80A is an extremely powerful ESC with 5-12V Switch BEC for aircraft applications. Compared to its predecessor, this ESC impresses with faster throttle response, higher efficiency, and lower temperature rise, clearly setting it apart from comparable ESCs. This is ensured by the built-in 32-bit processor in combination with a specially developed algorithm for speed accuracy. In addition to this algorithm, the Platinum V5 80A is equipped with protocols that allow various transmitter systems to read the ESC's data. These include, for example, the Mikado VBar system and Futaba S.BUS2.\u003c\/p\u003e\n\n\u003cp\u003eThe modern advantages of the Platinum V5 are also evident in its design, such as the numerous protection functions to make the next flight as safe as possible. These include protection against overheating of the ESC itself and for the attached capacitors. However, to prevent excessive heat buildup and the need to activate this protection, the ESC features a double-sided heatsink with side ventilation. This allows air to flow quickly through the interior of the ESC and cool it efficiently. Should that not be enough, the various protection functions will intervene and prevent major damage.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEfficient cooling due to cooling chamber design.\u003c\/li\u003e\n\t\u003cli\u003eBuilt-in 12V Switch-BEC (5-12V)\u003c\/li\u003e\n\t\u003cli\u003eSupports multiple data protocols\u003cbr\u003e\n\te.g. Mikado VBar System, Futaba S.BUS2, etc.\u003c\/li\u003e\n\t\u003cli\u003eIncludes data logging, viewable on smartphone via Bluetooth\u003c\/li\u003e\n\t\u003cli\u003eMultiple protection functions (e.g., against back currents)\u003c\/li\u003e\n\t\u003cli\u003e16 adjustable parameters, including 4 flight modes:\n\t\u003cul\u003e\n\t\t\u003cli\u003eFixed Wing\u003c\/li\u003e\n\t\t\u003cli\u003eHelicopter - External Governor\u003c\/li\u003e\n\t\t\u003cli\u003eHelicopter - Elf Governor\u003c\/li\u003e\n\t\t\u003cli\u003eHelicopter - Store Governor\u003c\/li\u003e\n\t\u003c\/ul\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":53447372407127,"sku":"ROHW30203201","price":75.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/ROHW30203201_b1_bd75c4ad-1b81-418c-a648-d25d10179bad.jpg?v=1779816488"},{"product_id":"hobbywing-platinum-pro-brushless-regler-120a-v5-3-8s-bec-10-30a-hw30203402","title":"Hobbywing Platinum PRO Brushless ESC 120A V5, 3-8S, BEC 10\/30A, # HW30203402","description":"\u003ch1 style=\"text-align: center;\"\u003eHobbywing Platinum PRO Brushless ESC 120A V5, 3-8S, BEC 10\/30A, # HW30203402\u003c\/h1\u003e\n\n\u003cp\u003eThe Platinum PRO 120 V5 is an extremely powerful ESC with 5-12V Switch BEC for flight applications. Compared to its predecessor, this ESC truly impresses with its faster throttle response, higher efficiency, and lower temperature increase, clearly setting it apart from comparable ESCs. This is achieved by the integrated 32-bit processor in combination with a specially developed algorithm for RPM accuracy. In addition to this algorithm, the Platinum PRO 120 V5 is equipped with protocols that allow various transmitter systems to read the ESC's data. These include, for example, the Mikado VBar system and Futaba S.BUS2.\u003c\/p\u003e\n\n\u003cp\u003eThe modern advantages of the Platinum V5 are also evident in its construction, such as the numerous protection functions designed to make the next flight as safe as possible. These include protection against overheating of the ESC itself as well as for the attached capacitors. However, to prevent excessive heat from building up in the first place and activating this protection, the ESC features a double-sided heatsink with side ventilation. This allows air to flow quickly through the inside of the ESC and cool it efficiently. Should this not be sufficient, the various protection functions will intervene and prevent major damage.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEfficient cooling through cooling chamber design.\u003c\/li\u003e\n\t\u003cli\u003eBuilt-in 12V Switch-BEC (5-12V)\u003c\/li\u003e\n\t\u003cli\u003eSupports multiple data protocols\u003cbr\u003e\n\te.g. Mikado VBar System, Futaba S.BUS2, etc.\u003c\/li\u003e\n\t\u003cli\u003eIncludes data logging, accessible via Bluetooth on a smartphone\u003c\/li\u003e\n\t\u003cli\u003eMultiple protection functions\u003c\/li\u003e\n\t\u003cli\u003e16 adjustable parameters, including 4 flight modes:\n\t\u003cul\u003e\n\t\t\u003cli\u003eFixed Wing\u003c\/li\u003e\n\t\t\u003cli\u003eHelicopter - External Governor\u003c\/li\u003e\n\t\t\u003cli\u003eHelicopter - Elf Governor\u003c\/li\u003e\n\t\t\u003cli\u003eHelicopter - Store Governor\u003c\/li\u003e\n\t\u003c\/ul\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":53447372833111,"sku":"ROHW30203402","price":124.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/ROHW30203402_b1.jpg?v=1779911638"},{"product_id":"hobbywing-platinum-180a-hv-v5-bec-180a-260a-6-14s-100-6x45-5x26-1mm-251g-hw30209103","title":"Hobbywing Platinum 180A HV V5, BEC, 180A\/260A, 6-14S, 100.6x45.5x26.1mm, 251g, HW30209103","description":"\u003ch1 style=\"text-align: center;\"\u003eHobbywing Platinum 180A HV V5, BEC, 180A\/260A, 6-14S,\u003cbr\u003e\n100.6x45.5x26.1mm, 251g, # HW30209103\u003c\/h1\u003e\n\n\u003cp\u003eThe Platinum V5 180A HV V5 is an extremely powerful ESC with a 5-12V Switch BEC for the 550-700 class aircraft range. This is ensured by the built-in 32-bit processor in combination with a specially developed algorithm for speed accuracy, which significantly sets the ESC's performance apart from similar ESCs on the market. In addition to this algorithm, the Platinum V5 180A is equipped with protocols that allow various transmitter systems to read the ESC's data. These include, for example, the Mikado VBar system and Futaba S.BUS2.\u003cbr\u003e\nThe modern advantages of the Platinum V5 are also evident in its design, such as the many protection functions to make the next flight as safe as possible. These include protection against overheating of the ESC itself as well as for the attached capacitors. To prevent excessive heat from building up in the first place and activating this protection, the ESC features a double-sided heat sink with side ventilation. This allows air to flow quickly through the interior of the ESC and cool it efficiently. If this is no longer sufficient, the various protection functions intervene and prevent major damage.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEfficient cooling through cooling chamber design.\u003c\/li\u003e\n\t\u003cli\u003eBuilt-in 12V Switch-BEC (5-12V)\u003c\/li\u003e\n\t\u003cli\u003eSupports multiple data protocols, e.g. Mikado VBar System, Futaba S.BUS2\u003c\/li\u003e\n\t\u003cli\u003eIncludes data logging, viewable on smartphone via Bluetooth\u003c\/li\u003e\n\t\u003cli\u003eMultiple protection functions (e.g. against back currents)\u003c\/li\u003e\n\t\u003cli\u003e16 adjustable parameters, including 4 flight modes:\n\t\u003cul\u003e\n\t\t\u003cli\u003eFixed Wing\u003c\/li\u003e\n\t\t\u003cli\u003eHelicopter - External Governor\u003c\/li\u003e\n\t\t\u003cli\u003eHelicopter - Elf Governor\u003c\/li\u003e\n\t\t\u003cli\u003eHelicopter - Store Governor\u003c\/li\u003e\n\t\u003c\/ul\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":53447375225175,"sku":"ROHW30209103","price":274.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/ROHW30209103_b1_e8fb623d-bd8b-4487-99d2-22662a4817fc.jpg?v=1779816589"},{"product_id":"brushless-regler-yge-105-aureus-v2-hvt-12-25a-5-5-12v-bec-telemetrie","title":"Brushless ESC YGE 105 Aureus V2 HVT, 12\/25A @ 5.5-12V BEC, Telemetry","description":"\u003ch1\u003eBrushless Controller YGE 105 Aureus V2 HVT, 12\/25A @ 5.5-12V BEC, Telemetry\u003c\/h1\u003e\n\n\u003cp\u003eThe -\u003cb\u003eT-\u003c\/b\u003e in the designation of the YGE-105 Aureus V2 HV\u003cb\u003eT\u003c\/b\u003e BEC stands for telemetry. The following protocols are currently supported:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMikado VBar\u003c\/li\u003e\n\t\u003cli\u003eGraupner HoTT V4\u003c\/li\u003e\n\t\u003cli\u003eJeti ExBUS\u003c\/li\u003e\n\t\u003cli\u003eMultiplex Sensor BUS V2\u003c\/li\u003e\n\t\u003cli\u003eProprietary YGE protocol for further telemetry connections via e.g. S32 (new Jlog from R² Prototyping). Further protocols are in preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWith the \u003cb\u003eoptionally available USB adapter\u003c\/b\u003e, the 105 Aureus V2 HVT-BEC can be extensively configured and updated. During operation, the PWM frequency automatically adjusts to the motor's requirements, ensuring optimal performance at all times. Thanks to the new sinusoidal start-up of the 105 Aureus V2 HVT, the start-up behavior is now SUPER SMOOTH.\u003c\/p\u003e\n\n\u003cp\u003eThe built-in BEC is adjustable between 5.5V and 12V and delivers a remarkable 12 \/ 25 Amps of current.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe specified current is the maximum continuous full-throttle current with good cooling.\u003c\/li\u003e\n\t\u003cli\u003e6 to 12S LiPo, regulation or cut-off for undervoltage.\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eBEC 5.5-12V and 12A continuous \/ 25A\u003c\/b\u003e peak - undervoltage detection can be switched off.\u003c\/li\u003e\n\t\u003cli\u003eCurrent limitation\u003c\/li\u003e\n\t\u003cli\u003eUndervoltage detection can be switched off\u003c\/li\u003e\n\t\u003cli\u003eSpeed control (Governor mode).\u003c\/li\u003e\n\t\u003cli\u003eSoft start (up to 60 sec. for scale helicopters)\u003c\/li\u003e\n\t\u003cli\u003eActive freewheeling, therefore unlimited partial load capability.\u003c\/li\u003e\n\t\u003cli\u003eAutomatic timing, or adjustable in 6 steps.\u003c\/li\u003e\n\t\u003cli\u003eEMF brake adjustable.\u003c\/li\u003e\n\t\u003cli\u003eF3A \/ Acro brake (brake strength continuously adjustable during flight).\u003c\/li\u003e\n\t\u003cli\u003eMin. and max. values are logged and can be displayed after the flight in the optional PC tool (e.g. current)\u003c\/li\u003e\n\t\u003cli\u003eSpeed limit: 240,000 rpm (2-pole)\u003c\/li\u003e\n\t\u003cli\u003eOvertemperature \/ overload warning\u003c\/li\u003e\n\t\u003cli\u003eAnti-spark: Reduces the power-on spark.\u003c\/li\u003e\n\t\u003cli\u003eBasic programming via mode setup.\u003c\/li\u003e\n\t\u003cli\u003eFine tuning and selection of the telemetry protocol via PC setup, \u003cb\u003esuitable USB adapter is optionally available.\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YGE","offers":[{"title":"Default Title","offer_id":53449059533143,"sku":"Y105HVT-V2-BEC","price":310.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/Y105HVT-V2-BEC_b1_f2e0bd5a-b76f-4822-a007-c7a474d2fe08.jpg?v=1779819138"},{"product_id":"brushless-regler-yge-125-saphir-v2-4-8s-12a-5-5-12v-bec-telemetrie-lufter","title":"Brushless ESC YGE 125 Saphir V2, 4-8S, 12A \/ 5.5-12V BEC, telemetry, fan","description":"\u003ch1\u003eBrushless ESC YGE 125-Saphir V2 HVT, 12\/25A 5.5-12V BEC, Telemetry\u003c\/h1\u003e\n\n\u003cp\u003eThe 125 Saphir V2 ESC differs from its predecessor in these features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eNew aluminum housing with blue anodized edges and optimized cooling\u003c\/li\u003e\n\t\u003cli\u003eUHV-BEC, adjustable from 5.5V to 12.0V with 12A continuous and 25A peak\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe -T- in the name of the YGE-125 Saphir V2 stands for telemetry. Currently, the following protocols are supported:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMikado VBar\u003c\/li\u003e\n\t\u003cli\u003eGraupner HoTT V4\u003c\/li\u003e\n\t\u003cli\u003eJeti ExBUS\u003c\/li\u003e\n\t\u003cli\u003eMultiplex Sensor BUS V2\u003c\/li\u003e\n\t\u003cli\u003eProprietary YGE protocol for further telemetry connections via, for example, S32 (new Jlog from R² Prototyping). Further protocols are in preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe optionally available USB adapter allows the 125 Saphir V2 to be set in many ways and new updates to be uploaded. During operation, the PWM frequency is always automatically adjusted to the motor's needs, thus always being optimal. Thanks to the new sine wave start of the 125 Saphir V2, the startup behavior is now SUPER SOFT.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe stated current is the maximum continuous full throttle current with good cooling.\u003c\/li\u003e\n\t\u003cli\u003e6 to 12S LiPo, voltage reduction or shutdown upon undervoltage.\u003c\/li\u003e\n\t\u003cli\u003eUHV-BEC, adjustable from 5.5V to 12.0V\u003c\/li\u003e\n\t\u003cli\u003eBEC 12\/25A - Undervoltage detection can be switched off.\u003c\/li\u003e\n\t\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\t\u003cli\u003eUndervoltage detection can be switched off\u003c\/li\u003e\n\t\u003cli\u003eSpeed control (Governor Mode).\u003c\/li\u003e\n\t\u003cli\u003eSoft start (up to 60 sec. for scale helicopters)\u003c\/li\u003e\n\t\u003cli\u003eActive freewheel, thus unlimited partial load capability.\u003c\/li\u003e\n\t\u003cli\u003eAutomatic timing, or adjustable in 6 steps.\u003c\/li\u003e\n\t\u003cli\u003eEMK brake adjustable.\u003c\/li\u003e\n\t\u003cli\u003eF3A \/ Acro brake (braking strength continuously adjustable in flight).\u003c\/li\u003e\n\t\u003cli\u003eMin. and max. values are logged and can be displayed after the flight in the optional PC tool (e.g., current)\u003c\/li\u003e\n\t\u003cli\u003eSpeed limit: 240,000 rpm (2-pole)\u003c\/li\u003e\n\t\u003cli\u003eOvertemperature \/ overload warning\u003c\/li\u003e\n\t\u003cli\u003eAnti-spark: Reduces the power-on spark.\u003c\/li\u003e\n\t\u003cli\u003eBasic programming via mode setup.\u003c\/li\u003e\n\t\u003cli\u003eFine adjustment and selection of the telemetry protocol via PC setup, suitable USB adapter is optionally available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YGE","offers":[{"title":"Default Title","offer_id":53449061630295,"sku":"Y125-Saphir-V2","price":259.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/Y125-Saphir-V2_b1.jpg?v=1779936142"},{"product_id":"brushless-regler-yge-135-aureus-v2-hvt-6-12s-10-25a-bec-telemetrie","title":"Brushless ESC YGE 135 Aureus V2, HVT, 6-12S, 10\/25A BEC, Telemetry","description":"\u003ch1\u003eBrushless ESC YGE 135-Aureus V2 HVT, 12\/25A 5.5-12V BEC, Telemetry\u003c\/h1\u003e\n\n\u003cp\u003eThe 135 Aureus V2 ESC differs from its predecessor in these features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eNew aluminum housing with blue anodized edges and optimized cooling\u003c\/li\u003e\n\t\u003cli\u003eUHV-BEC, adjustable from 5.5V to 12.0V with 12A continuous and 25A peak\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe -T- in the name of the YGE-135 Aureus V2 HVT BEC stands for Telemetry. The following protocols are currently supported:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMikado VBar\u003c\/li\u003e\n\t\u003cli\u003eGraupner HoTT V4\u003c\/li\u003e\n\t\u003cli\u003eJeti ExBUS\u003c\/li\u003e\n\t\u003cli\u003eMultiplex Sensor BUS V2\u003c\/li\u003e\n\t\u003cli\u003eProprietary YGE protocol for further telemetry connections via e.g. S32 (new Jlog from R² Prototyping). Further protocols are in preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe optionally available USB adapter allows the 135 Aureus V2 HVT-BEC to be set in various ways and new updates to be uploaded. During operation, the PWM frequency is always automatically adapted to the needs of the motor and is therefore always optimal. Thanks to the new sinusoidal start-up of the 135 Aureus V2 HVT, the start-up behavior is now SUPER-SMOOTH.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe stated current is the maximum continuous full-throttle current with good cooling.\u003c\/li\u003e\n\t\u003cli\u003e6 to 12S LiPo, regulation or shutdown in case of undervoltage.\u003c\/li\u003e\n\t\u003cli\u003eUHV-BEC, adjustable from 5.5V to 12.0V\u003c\/li\u003e\n\t\u003cli\u003eBEC 12\/25A - undervoltage detection can be switched off.\u003c\/li\u003e\n\t\u003cli\u003eCurrent limitation\u003c\/li\u003e\n\t\u003cli\u003eUndervoltage detection can be switched off\u003c\/li\u003e\n\t\u003cli\u003eSpeed control (Governor mode).\u003c\/li\u003e\n\t\u003cli\u003eSoft start (up to 60 seconds for scale helicopters)\u003c\/li\u003e\n\t\u003cli\u003eActive freewheeling, therefore unlimited partial load capability.\u003c\/li\u003e\n\t\u003cli\u003eAutomatic timing, or adjustable in 6 steps.\u003c\/li\u003e\n\t\u003cli\u003eEMK brake adjustable.\u003c\/li\u003e\n\t\u003cli\u003eF3A \/ Acro brake (braking strength continuously adjustable during flight).\u003c\/li\u003e\n\t\u003cli\u003eMin. and Max. values are logged and can be displayed after the flight in the optional PC tool (e.g. current).\u003c\/li\u003e\n\t\u003cli\u003eSpeed limit: 240,000 rpm (2-pole)\u003c\/li\u003e\n\t\u003cli\u003eOver-temperature \/ overload warning\u003c\/li\u003e\n\t\u003cli\u003eAnti-spark: Reduces the turn-on spark.\u003c\/li\u003e\n\t\u003cli\u003eBasic programming via mode setup.\u003c\/li\u003e\n\t\u003cli\u003eFine adjustment and selection of the telemetry protocol via PC setup, suitable USB adapter is optionally available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YGE","offers":[{"title":"Default Title","offer_id":53449061990743,"sku":"Y135HVT-V2-BEC","price":394.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/Y135HVT-V2-BEC_b1_05e65bd2-4a14-4fc1-bff4-92873feca21b.jpg?v=1779819178"},{"product_id":"brushless-regler-yge-155-saphir-v2-4-8s-12-25a-5-5-12v-uhv-bec-telem-lufter","title":"Brushless ESC YGE 155 Saphir V2, 4-8S, 12\/25A 5.5-12V UHV-BEC, Telemetry, Fan","description":"\u003ch1\u003eBrushless ESC YGE 155-Saphir V2 HVT, 12\/25A 5.5-12V BEC, Telemetry\u003c\/h1\u003e\n\n\u003cp\u003eThe 155 Saphir V2 ESC differs from its predecessor in the following features:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eNew aluminum housing with blue anodized edges and optimized cooling\u003c\/li\u003e\n\t\u003cli\u003eUHV-BEC, adjustable from 5.5V to 12.0V with 12A continuous and 25A peak\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe -T- in the YGE-155 Saphir V2's designation stands for telemetry. The following protocols are currently supported:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMikado VBar\u003c\/li\u003e\n\t\u003cli\u003eGraupner HoTT V4\u003c\/li\u003e\n\t\u003cli\u003eJeti ExBUS\u003c\/li\u003e\n\t\u003cli\u003eMultiplex Sensor BUS V2\u003c\/li\u003e\n\t\u003cli\u003eProprietary YGE protocol for further telemetry connections via e.g. S32 (new Jlog from R² Prototyping). Further protocols are in preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWith the optionally available USB adapter, the 155 Saphir V2 can be extensively configured and new updates can be installed. During operation, the PWM frequency is automatically adjusted to the motor's requirements, always ensuring optimal performance. Thanks to the new sinusoidal startup of the 155 Saphir V2, the startup behavior is now SUPER-SMOOTH.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe stated current is the maximum continuous full-throttle current with good cooling.\u003c\/li\u003e\n\t\u003cli\u003e6 to 12S LiPo, regulation or shutdown on undervoltage.\u003c\/li\u003e\n\t\u003cli\u003eUHV-BEC, adjustable from 5.5V to 12.0V\u003c\/li\u003e\n\t\u003cli\u003eBEC 12\/25A - Undervoltage detection can be switched off.\u003c\/li\u003e\n\t\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\t\u003cli\u003eUndervoltage detection can be switched off\u003c\/li\u003e\n\t\u003cli\u003eSpeed control (Governor Mode).\u003c\/li\u003e\n\t\u003cli\u003eSoft start (up to 60 seconds for scale helicopters)\u003c\/li\u003e\n\t\u003cli\u003eActive freewheeling, therefore unlimited partial load capability.\u003c\/li\u003e\n\t\u003cli\u003eAutomatic timing, or adjustable in 6 steps.\u003c\/li\u003e\n\t\u003cli\u003eEMK brake adjustable.\u003c\/li\u003e\n\t\u003cli\u003eF3A \/ Acro brake (brake strength continuously adjustable in flight).\u003c\/li\u003e\n\t\u003cli\u003eMin. and Max. values are logged and can be displayed after the flight in the optional PC tool (e.g., current).\u003c\/li\u003e\n\t\u003cli\u003eSpeed limit: 240,000 rpm (2-pole)\u003c\/li\u003e\n\t\u003cli\u003eOvertemperature \/ overload warning\u003c\/li\u003e\n\t\u003cli\u003eAnti-spark: Reduces the turn-on spark.\u003c\/li\u003e\n\t\u003cli\u003eBasic programming via mode setup.\u003c\/li\u003e\n\t\u003cli\u003eFine adjustment and selection of the telemetry protocol via PC setup, suitable USB adapter is optionally available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YGE","offers":[{"title":"Default Title","offer_id":53449062875479,"sku":"Y155LVT-V2","price":301.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/Y155LVT-V2_b1_bb434110-a185-493c-9c5b-c46563cd48a1.jpg?v=1779819198"},{"product_id":"brushless-regler-yge-185-aureus-hvt-10-25a-5-5-12v-bec-telemetrie","title":"Brushless ESC YGE 185 Aureus HVT, 10\/25A @ 5.5-12V BEC, Telemetry","description":"\u003ch1\u003eBrushless ESC YGE 185 Aureus HVT, 10\/25A @ 5.5-12V BEC, Telemetry\u003c\/h1\u003e\n\n\u003cp\u003eThe -\u003cb\u003eT-\u003c\/b\u003e in the designation of the YGE-185 Aureus HV\u003cb\u003eT\u003c\/b\u003e BEC stands for Telemetry. Currently, the following protocols are supported:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMikado VBar\u003c\/li\u003e\n\t\u003cli\u003eGraupner HoTT V4\u003c\/li\u003e\n\t\u003cli\u003eJeti ExBUS\u003c\/li\u003e\n\t\u003cli\u003eMultiplex Sensor BUS V2\u003c\/li\u003e\n\t\u003cli\u003eProprietary YGE protocol for further telemetry connections via e.g. S32 (new Jlog from R² Prototyping). Further protocols are in preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWith the \u003cb\u003eoptionally available USB adapter\u003c\/b\u003e, the 185 Aureus HVT-BEC can be extensively configured and updated. During operation, the PWM frequency is always automatically adjusted to the motor's needs and is thus always optimal. Thanks to the new sinusoidal startup of the 185 Aureus HVT, the startup behavior is now SUPER-SMOOTH.\u003c\/p\u003e\n\n\u003cp\u003eThe integrated BEC is adjustable between 5.5V and 12V and delivers a remarkable 10 \/ 25 Amps of current.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe specified current is the maximum continuous full throttle current with good cooling.\u003c\/li\u003e\n\t\u003cli\u003e6 to 12S LiPo, voltage regulation or cutoff at undervoltage.\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eBEC 5.5-12V and 10A continuous \/ 25A\u003c\/b\u003e Peak - undervoltage detection can be switched off.\u003c\/li\u003e\n\t\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\t\u003cli\u003eUndervoltage detection can be switched off\u003c\/li\u003e\n\t\u003cli\u003eSpeed control (Governor mode).\u003c\/li\u003e\n\t\u003cli\u003eSoft start (up to 60 sec. for scale helicopters)\u003c\/li\u003e\n\t\u003cli\u003eActive freewheeling, therefore unlimited partial load capability.\u003c\/li\u003e\n\t\u003cli\u003eAutomatic timing, or adjustable in 6 steps.\u003c\/li\u003e\n\t\u003cli\u003eEMF brake adjustable.\u003c\/li\u003e\n\t\u003cli\u003eF3A \/ Acro brake (braking force continuously adjustable in flight).\u003c\/li\u003e\n\t\u003cli\u003eMin. and Max. values are logged and can be displayed after the flight in the optional PC tool (e.g. current)\u003c\/li\u003e\n\t\u003cli\u003eSpeed limit: 240,000 rpm (2-pole)\u003c\/li\u003e\n\t\u003cli\u003eOvertemperature \/ overload warning\u003c\/li\u003e\n\t\u003cli\u003eAnti-spark: Reduces the power-on spark.\u003c\/li\u003e\n\t\u003cli\u003eBasic programming via mode setup.\u003c\/li\u003e\n\t\u003cli\u003eFine adjustment and selection of the telemetry protocol via PC setup, \u003cb\u003esuitable USB adapter is optionally available.\u003c\/b\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSpeed controller Aureus 185 HVT-BEC\u003c\/li\u003e\n\t\u003cli\u003eRubber buffer\u003c\/li\u003e\n\t\u003cli\u003eFan with connecting cable and protective grille\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YGE","offers":[{"title":"Default Title","offer_id":53449064743255,"sku":"Y185HVT-BEC","price":478.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/Y185HVT-BEC_b1.jpg?v=1779936184"},{"product_id":"brushless-regler-yge-255-hvt-opto-6-16s-telemetrie","title":"Brushless ESC YGE 255 HVT Opto, 6-16S, Telemetry","description":"\u003ch1\u003eBrushless ESC YGE 255 HVT Opto, 6-16S, Telemetry \u003c\/h1\u003e\n\n\u003cp\u003eThe YGE-255 Opto currently supports the following telemetry protocols:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMikado VBar\u003c\/li\u003e\n\t\u003cli\u003eGraupner HoTT V4\u003c\/li\u003e\n\t\u003cli\u003eJeti ExBUS\u003c\/li\u003e\n\t\u003cli\u003eMultiplex Sensor BUS V2\u003c\/li\u003e\n\t\u003cli\u003eproprietary YGE protocol for further telemetry connections via e.g. S32 (new Jlog from R² Prototyping). Further protocols are in preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWith the\u003cb\u003e optionally available USB adapter\u003c\/b\u003e, the 255 Opto can be adjusted in many ways and new updates can be installed. During operation, the PWM frequency is always automatically adapted to the needs of the motor and is therefore always optimal. Thanks to the new sine start-up of the 255 Opto, the start-up behavior is now SUPER SMOOTH.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eESC with optocoupler, therefore NO BEC\u003c\/li\u003e\n\t\u003cli\u003eVersatile connection strips allow, in addition to telemetry output, extended interfaces for industrial and special applications such as CAN, potentiometer control, prop positioning (on request)\u003c\/li\u003e\n\t\u003cli\u003e\"T\" stands for Telemetry. The following telemetry protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti ExBUS, Multiplex Sensor BUS V2, proprietary YGE protocol for further telemetry connections via e.g. YGE TexY (Futaba, Spektrum, FrSky, Core), MSH Brain 2, Spirit FBL\u003c\/li\u003e\n\t\u003cli\u003eUpdateable (optional USB adapter available)\u003c\/li\u003e\n\t\u003cli\u003ecompletely revised hardware and software (32-bit)\u003c\/li\u003e\n\t\u003cli\u003ethe PWM frequency is automatically adjusted to the needs of the motor\u003c\/li\u003e\n\t\u003cli\u003eThe specified current is the maximum continuous full throttle current with good cooling.\u003c\/li\u003e\n\t\u003cli\u003e4 to 16S LiPo, power reduction or shutdown in case of undervoltage. \u003c\/li\u003e\n\t\u003cli\u003eCurrent limit\u003c\/li\u003e\n\t\u003cli\u003eUndervoltage detection can be switched off.\u003c\/li\u003e\n\t\u003cli\u003eSpeed control (Governor Mode).\u003c\/li\u003e\n\t\u003cli\u003eSoft start (sine or block commutation)\u003c\/li\u003e\n\t\u003cli\u003eActive freewheeling, therefore unlimited partial load capability.\u003c\/li\u003e\n\t\u003cli\u003eAutomatic timing, or adjustable in 6 steps.\u003c\/li\u003e\n\t\u003cli\u003eEMK brake adjustable.\u003c\/li\u003e\n\t\u003cli\u003eF3A \/ Acro brake (brake strength continuously adjustable during flight).\u003c\/li\u003e\n\t\u003cli\u003eMin. and Max. values are logged and can be displayed after the flight in the optional PC tool (e.g. current)\u003c\/li\u003e\n\t\u003cli\u003eSpeed limit: 240,000 rpm (2-pole)\u003c\/li\u003e\n\t\u003cli\u003eOvertemperature \/ overload warning\u003c\/li\u003e\n\t\u003cli\u003eAnti-spark: Reduces the switch-on spark.\u003c\/li\u003e\n\t\u003cli\u003eDimensions in mm: 105 x 54 x 32mm\u003c\/li\u003e\n\t\u003cli\u003eWeight with cable: 343g\u003c\/li\u003e\n\t\u003cli\u003eBasic programming via mode setup.\u003c\/li\u003e\n\t\u003cli\u003eFine adjustment and selection of the telemetry protocol via PC setup, suitable USB adapter is optionally available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YGE","offers":[{"title":"Default Title","offer_id":53449065169239,"sku":"Y255OPTO","price":587.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/Y255OPTO_b1_eeb14bdd-ebd9-45a4-bd6e-b42d1cd1dfeb.jpg?v=1779819237"},{"product_id":"brushless-regler-yge-265-aureus-hvt-15-30a-5-5-12v-bec-telemetrie","title":"Brushless ESC YGE 265 Aureus HVT, 15\/30A @ 5.5-12V BEC, Telemetry","description":"\u003ch1\u003eBrushless ESC YGE 265 Aureus HVT, 15\/30A @ 5.5-12V BEC, Telemetry\u003c\/h1\u003e\n\n\u003cp\u003eThe -\u003cb\u003eT-\u003c\/b\u003e in the designation of the YGE-265 Aureus HV\u003cb\u003eT\u003c\/b\u003e BEC stands for telemetry. The following protocols are currently supported:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMikado VBar\u003c\/li\u003e\n\t\u003cli\u003eGraupner HoTT V4\u003c\/li\u003e\n\t\u003cli\u003eJeti ExBUS\u003c\/li\u003e\n\t\u003cli\u003eMultiplex Sensor BUS V2\u003c\/li\u003e\n\t\u003cli\u003eProprietary YGE protocol for further telemetry connections via, for example, S32 (new Jlog from R² Prototyping). Further protocols are in preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWith the\u003cb\u003e optionally available USB adapter\u003c\/b\u003e, the 265 Aureus HVT-BEC can be extensively configured and updated with new firmware. During operation, the PWM frequency is automatically adjusted to the motor's requirements, always ensuring optimal performance. Thanks to the new sinusoidal start-up of the 265 Aureus HVT, the start-up behavior is now SUPER SMOOTH.\u003c\/p\u003e\n\n\u003cp\u003eThe built-in BEC is adjustable between 5.5V and 12V and delivers a remarkable 15 \/ 30 Amperes of current.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe stated current is the maximum continuous full-throttle current with good cooling.\u003c\/li\u003e\n\t\u003cli\u003e6 to 14S LiPo, power reduction or shutdown on undervoltage.       \u003c\/li\u003e\n\t\u003cli\u003e\n\u003cb\u003eBEC 5.5-12V and 15A continuous \/ 30A\u003c\/b\u003e Peak - Undervoltage detection can be switched off.\u003c\/li\u003e\n\t\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\t\u003cli\u003eUndervoltage detection can be switched off\u003c\/li\u003e\n\t\u003cli\u003eSpeed control (Governor Mode).\u003c\/li\u003e\n\t\u003cli\u003eSoft start (up to 60 sec. for scale helicopters)\u003c\/li\u003e\n\t\u003cli\u003eActive freewheeling, making it infinitely partial load resistant.\u003c\/li\u003e\n\t\u003cli\u003eAutomatic timing, or adjustable in 6 steps.\u003c\/li\u003e\n\t\u003cli\u003eEMF brake adjustable.\u003c\/li\u003e\n\t\u003cli\u003eF3A \/ Acro brake (braking strength continuously adjustable during flight).\u003c\/li\u003e\n\t\u003cli\u003eMin. and Max. values are logged and can be displayed in the optional PC tool after the flight (e.g., current)\u003c\/li\u003e\n\t\u003cli\u003eSpeed limit: 240,000 rpm (2-pole)\u003c\/li\u003e\n\t\u003cli\u003eOvertemperature \/ overload warning\u003c\/li\u003e\n\t\u003cli\u003eAnti-spark: Reduces the power-on spark.\u003c\/li\u003e\n\t\u003cli\u003eBasic programming via mode setup.\u003c\/li\u003e\n\t\u003cli\u003eFine tuning and selection of the telemetry protocol via PC setup,\u003cb\u003e suitable USB adapter is optionally available. \u003c\/b\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSpeed controller Aureus 265 HVT-BEC       \u003c\/li\u003e\n\t\u003cli\u003eRubber buffers\u003c\/li\u003e\n\t\u003cli\u003eFan with connection cable and protective grille\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YGE","offers":[{"title":"Default Title","offer_id":53449065824599,"sku":"Y265HVT-BEC","price":629.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/Y265HVT-BEC_b1_f9370386-31c5-4a27-bda4-1436f79f35e3.jpg?v=1779819256"},{"product_id":"brushless-regler-yge-35-lvt-mit-bec-5-5-8-4v-und-telemetrie","title":"Brushless ESC YGE 35 LVT with BEC (5.5-8.4V) and Telemetry","description":"\u003ch1\u003eBrushless ESC YGE 35 LVT with adjustable BEC and telemetry\u003c\/h1\u003e\n\n\u003cp\u003eThe \u003cb\u003e-T-\u003c\/b\u003e in the designation of the YGE-35LV\u003cb\u003eT\u003c\/b\u003e stands for Telemetry. The following protocols are currently supported:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eGraupner HoTT V4\u003c\/li\u003e\n\t\u003cli\u003eJeti ExBUS\u003c\/li\u003e\n\t\u003cli\u003eMultiplex Sensor BUS V2\u003c\/li\u003e\n\t\u003cli\u003eProprietary YGE protocol for further telemetry connections via e.g. S32 (new Jlog from R² Prototyping). Further protocols are in preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe \u003cb\u003eoptionally available USB adapter\u003c\/b\u003e allows the 35LVT to be extensively configured and new updates to be installed. During operation, the PWM frequency is automatically adjusted to the motor's requirements and is therefore always optimal. Thanks to the new sine start-up of the 35LVT, the start-up behavior is now SUPERSOFT. The highly resilient (5\/10A) and adjustable BEC (5.5 to 8.4V) complement the outstanding features of the YGE-35LVT.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe stated current is the maximum continuous full-throttle current with good cooling.\u003c\/li\u003e\n\t\u003cli\u003e2 to 6s LiPo, regulation or shutdown at undervoltage.\u003c\/li\u003e\n\t\u003cli\u003eBEC - undervoltage detection, switchable.\u003c\/li\u003e\n\t\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\t\u003cli\u003eSpeed control (Governor Mode).\u003c\/li\u003e\n\t\u003cli\u003eSoft start.\u003c\/li\u003e\n\t\u003cli\u003eActive freewheeling, therefore unlimited partial load resistance.\u003c\/li\u003e\n\t\u003cli\u003eAutomatic timing, or adjustable in 6 steps.\u003c\/li\u003e\n\t\u003cli\u003eEMK brake adjustable.\u003c\/li\u003e\n\t\u003cli\u003eF3A \/ Acro brake (braking force continuously adjustable in flight).\u003c\/li\u003e\n\t\u003cli\u003eMin. and Max. values are logged and can be displayed in the optional PC tool after the flight (e.g. current)\u003c\/li\u003e\n\t\u003cli\u003eSpeed limit: 240,000 rpm (2-pole)\u003c\/li\u003e\n\t\u003cli\u003eOver-temperature \/ overload warning\u003c\/li\u003e\n\t\u003cli\u003eBasic programming via mode setup.\u003c\/li\u003e\n\t\u003cli\u003eFine adjustment and selection of the telemetry protocol via PC setup, \u003cb\u003esuitable USB adapter is optionally available.\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YGE","offers":[{"title":"Default Title","offer_id":53449068151127,"sku":"Y35LVT","price":91.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/Y35LVT_b1.jpg?v=1779913947"},{"product_id":"brushless-regler-yge-65-lvt-mit-bec-5-5-8-4v-und-telemetrie","title":"Brushless ESC YGE 65 LVT with BEC (5.5-8.4V) and telemetry","description":"\u003ch1\u003eBrushless ESC YGE 65 LVT with adjustable BEC and Telemetry\u003c\/h1\u003e\n\n\u003cp\u003eThe -\u003cb\u003eT-\u003c\/b\u003e in the designation of the YGE-65LV\u003cb\u003eT\u003c\/b\u003e stands for telemetry. Currently, the following protocols are supported:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eGraupner HoTT V4\u003c\/li\u003e\n\t\u003cli\u003eJeti ExBUS\u003c\/li\u003e\n\t\u003cli\u003eMultiplex Sensor BUS V2\u003c\/li\u003e\n\t\u003cli\u003eProprietary YGE protocol for further telemetry connections via, for example, S32 (new Jlog from R² Prototyping). Further protocols are in preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThanks to the \u003cb\u003eoptionally available USB adapter\u003c\/b\u003e, the 65LVT can be extensively adjusted and new updates can be uploaded. During operation, the PWM frequency is always automatically adapted to the needs of the motor and is therefore always optimal. With the new sine wave startup of the 65LVT, the startup behavior is now SUPERSOFT. The heavy-duty (8\/18A) and adjustable BEC (5.5 to 8.4V) complement the outstanding features of the YGE-65LVT.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe specified current is the maximum continuous full throttle current with good cooling.\u003c\/li\u003e\n\t\u003cli\u003e2 to 6s LiPo, regulation or shutdown at undervoltage.\u003c\/li\u003e\n\t\u003cli\u003eBEC - Undervoltage detection can be switched off.\u003c\/li\u003e\n\t\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\t\u003cli\u003eSpeed control (Governor mode).\u003c\/li\u003e\n\t\u003cli\u003eSoft start.\u003c\/li\u003e\n\t\u003cli\u003eActive freewheeling, therefore unlimited partial load capability.\u003c\/li\u003e\n\t\u003cli\u003eAutomatic timing, or adjustable in 6 steps.\u003c\/li\u003e\n\t\u003cli\u003eEMK brake adjustable.\u003c\/li\u003e\n\t\u003cli\u003eF3A \/ Acro brake (brake strength continuously adjustable in flight).\u003c\/li\u003e\n\t\u003cli\u003eMin. and Max values are logged and can be displayed after the flight in the optional PC tool (e.g., current).\u003c\/li\u003e\n\t\u003cli\u003eSpeed limit: 240,000 rpm (2-pole).\u003c\/li\u003e\n\t\u003cli\u003eOvertemperature \/ overload warning.\u003c\/li\u003e\n\t\u003cli\u003eAnti-spark: Reduces the switch-on spark.\u003c\/li\u003e\n\t\u003cli\u003eBasic programming via mode setup.\u003c\/li\u003e\n\t\u003cli\u003eFine adjustment and selection of the telemetry protocol via PC setup, \u003cb\u003esuitable USB adapter is optionally available.\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YGE","offers":[{"title":"Default Title","offer_id":53449091809623,"sku":"Y65LVT","price":158.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/Y65LVT_b1.jpg?v=1779936265"},{"product_id":"brushless-regler-yge-95-lvt-mit-bec-5-5-8-4v-und-telemetrie","title":"Brushless ESC YGE 95 LVT with BEC (5.5-8.4V) and Telemetry","description":"\u003ch1\u003eBrushless ESC YGE 95 LVT with adjustable BEC and Telemetry\u003c\/h1\u003e\n\n\u003cp\u003eThe \u003cb\u003e-T-\u003c\/b\u003e in the designation of the YGE-95LV\u003cb\u003eT\u003c\/b\u003e stands for telemetry. The following protocols are currently supported:\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eGraupner HoTT V4\u003c\/li\u003e\n\t\u003cli\u003eJeti ExBUS\u003c\/li\u003e\n\t\u003cli\u003eMultiplex Sensor BUS V2\u003c\/li\u003e\n\t\u003cli\u003eProprietary YGE protocol for further telemetry connections via e.g. S32 (new Jlog from R² Prototyping). Further protocols are in preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe 95LVT can be extensively adjusted and updated with new firmware via the \u003cb\u003eoptionally available USB adapter\u003c\/b\u003e. During operation, the PWM frequency is always automatically adapted to the motor's requirements, ensuring optimal performance. Thanks to the new sinusoidal startup of the 95LVT, the startup behavior is now SUPER SMOOTH. The high-current (8\/18A) and adjustable BEC (5.5 to 8.4V) complement the outstanding features of the YGE-95LVT.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eThe stated current is the maximum continuous full throttle current with good cooling.\u003c\/li\u003e\n\t\u003cli\u003e2 to 6s LiPo, regulation down or shutdown at undervoltage.\u003c\/li\u003e\n\t\u003cli\u003eBEC - Undervoltage detection can be switched off.\u003c\/li\u003e\n\t\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\t\u003cli\u003eSpeed control (Governor Mode).\u003c\/li\u003e\n\t\u003cli\u003eSoft start.\u003c\/li\u003e\n\t\u003cli\u003eActive freewheeling, therefore unlimited partial load capability.\u003c\/li\u003e\n\t\u003cli\u003eAutomatic timing, or adjustable in 6 steps.\u003c\/li\u003e\n\t\u003cli\u003eEMK brake adjustable.\u003c\/li\u003e\n\t\u003cli\u003eF3A \/ Acro brake (braking strength continuously adjustable in flight).\u003c\/li\u003e\n\t\u003cli\u003eMin. and max. values are logged and can be displayed after the flight in the optional PC tool (e.g. current).\u003c\/li\u003e\n\t\u003cli\u003eSpeed limit: 240,000 rpm (2-pole)\u003c\/li\u003e\n\t\u003cli\u003eOver-temperature \/ overload warning\u003c\/li\u003e\n\t\u003cli\u003eAnti-spark: Reduces the turn-on spark.\u003c\/li\u003e\n\t\u003cli\u003eBasic programming via mode setup.\u003c\/li\u003e\n\t\u003cli\u003eFine tuning and selection of the telemetry protocol via PC setup, \u003cb\u003esuitable USB adapter is optionally available.\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"YGE","offers":[{"title":"Default Title","offer_id":53449092235607,"sku":"Y95LVT","price":192.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/Y95LVT_b1_41883261-cb1e-456a-a9d8-0afa6a2d2f33.jpg?v=1780261059"},{"product_id":"hobbywing-platinum-pro-brushless-regler-150a-v5-1-3-8s-10a-hv-bec","title":"Hobbywing Platinum PRO Brushless ESC 150A V5.1, 3-8S, 10A HV BEC","description":"\u003ch1 style=\"text-align: center;\"\u003eHobbywing Platinum PRO Brushless ESC 150A V5.1, 3-8S, 10A HV BEC\u003c\/h1\u003e\n\n\u003cp\u003eThe Platinum V5.1 150A is the ideal companion for helicopter and fixed-wing pilots. This ESC is equipped with the latest technology and offers a variety of protective features. In addition, the design has been modified so that air circulation could not be better.\u003c\/p\u003e\n\n\u003cp\u003eBecause the two-sided PCB structure has been revised to improve heat dissipation. This is evident in the \"more open\" design, which leads to a better cooling effect. The additional use of thermal tape and an additional heat sink extends the lifespan and improves heat dissipation to the sensitive external capacitors.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eEfficient cooling through ventilation slots on two sides\u003c\/li\u003e\n\t\u003cli\u003eEquipped with \"DEO\" (Driving Efficiency Optimization) for best control characteristics and performance\u003c\/li\u003e\n\t\u003cli\u003eBuilt-in LED for status display\u003c\/li\u003e\n\t\u003cli\u003eImproved, extremely powerful (10\/30A) and voltage-adjustable BEC (5 - 12V)\u003c\/li\u003e\n\t\u003cli\u003eIncludes data logging, retrievable via OTA module on smartphone\u003c\/li\u003e\n\t\u003cli\u003eCompatible with Mikado VBar Control and VBar Telemetry Ready\u003c\/li\u003e\n\t\u003cli\u003eMultiple protection functions\u003c\/li\u003e\n\t\u003cli\u003e4 adjustable modes, as well as 4 new brake modes\n\t\u003cul\u003e\n\t\t\u003cli\u003eFixed Wing\u003c\/li\u003e\n\t\t\u003cli\u003eHelicopter - Linear Throttle\u003c\/li\u003e\n\t\t\u003cli\u003eHelicopter - Elf Governor\u003c\/li\u003e\n\t\t\u003cli\u003eHelicopter - Store Governor\u003c\/li\u003e\n\t\u003c\/ul\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":53449193488727,"sku":"ROHW30203501","price":152.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/Hobbywing-Platinum-PRO-Brushless-Regler-150A-V5-1-3-8S-10A-HV-BEC-ROHW30203501_b_0_1edb285d-295b-48c0-aa12-3ed725ff165a.jpg?v=1779819962"},{"product_id":"futaba-cgy755-heli-3d-f3c-kreisel","title":"FUTABA CGY755 Heli 3D\/F3C Gyro","description":"\u003ch1 style=\"text-align: center;\"\u003eFUTABA CGY755 Heli 3D\/F3C Gyro\u003c\/h1\u003e\n\n\u003cp\u003eThe FUTABA CGY755 is the powerful 3-in-1 solution for helicopters and includes the flybarless gyro, the tail rotor gyro, and the integrated governor for electric and internal combustion engines. Thanks to its high-quality 3-axis sensors and accelerometers, as well as its ultra-fast PID control loops, the CGY755 sets standards in its class! With the appropriate programming parameters, the CGY755 can be perfectly programmed for both 3D and F3C aerobatics.\u003cbr\u003e\nParameters can be adjusted either wirelessly via the transmitter or the GPB-1 programming box (via trainer port). The gyro housing is made of high-quality, anodized aluminum and can be mounted either rigidly or damped in the model.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ePowerful 3-in-1 solution with flybarless gyro, tail rotor gyro \u0026amp; governor for electric \u0026amp; internal combustion drives\u003c\/li\u003e\n\t\u003cli\u003eHigh-quality 3-axis sensors and accelerometers\u003c\/li\u003e\n\t\u003cli\u003eWireless programming\u003c\/li\u003e\n\t\u003cli\u003eServo neutral times 760 µs and 1520 µs\u003c\/li\u003e\n\t\u003cli\u003eEasy Setup for 3D \u0026amp; F3C\u003c\/li\u003e\n\t\u003cli\u003eSupports S.BUS2 telemetry sensors\u003c\/li\u003e\n\t\u003cli\u003eHigh-quality aluminum housing\u003c\/li\u003e\n\t\u003cli\u003eRigid or damped mounting possible\u003c\/li\u003e\n\t\u003cli\u003eProgrammable via GPB-1\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eTechnical Data \u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOperating voltage: 4.2 - 8.4 V\u003c\/li\u003e\n\t\u003cli\u003eSwashplate types: H3-90; H3-120; H3-140; H4-00; H4-45\u003c\/li\u003e\n\t\u003cli\u003eHead speed range: 700 rpm - 4000 rpm\u003c\/li\u003e\n\t\u003cli\u003eRotation rate: +\/- 1200° \/ s\u003c\/li\u003e\n\t\u003cli\u003eSpeed resolution: 6 rpm\u003c\/li\u003e\n\t\u003cli\u003eServo neutral times: 760 µs and 1520 µs\u003c\/li\u003e\n\t\u003cli\u003eServo framerate: 70 Hz (Analog), 280 Hz (Digital 1520 µs), 560 Hz (Digital 760 µs)\u003c\/li\u003e\n\t\u003cli\u003eGyro dimensions: 37.5 x 26.8 x 16.0 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: 20.2 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003e\u003cb\u003eScope of delivery \u003c\/b\u003e\u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCGY755 3-Axis Heli-Gyro and Governor\u003c\/li\u003e\n\t\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"FUTABA","offers":[{"title":"Default Title","offer_id":53647139635543,"sku":"MC-CGY755","price":259.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/FUTABA-CGY755-Heli-3D-F3C-Kreisel-MC-CGY755_b_0_fdfe3c9b-35a7-4cb3-b629-437d48b10bd2.jpg?v=1779964384"},{"product_id":"futaba-cgy755-heli-3d-f3c-kreisel-mit-gpb-1","title":"FUTABA CGY755 Heli 3D\/F3C Gyro with GPB-1","description":"\u003ch1 style=\"text-align: center;\"\u003eFUTABA CGY755 Heli 3D\/F3C Gyro with GPB-1\u003c\/h1\u003e\n\n\u003cp\u003eThe FUTABA CGY755 is the powerful 3-in-1 solution for helicopters and includes the flybarless gyro, tail rotor gyro, and integrated speed controller (governor) for electric and combustion engines. Thanks to the high-quality 3-axis sensors and accelerometers, as well as the ultra-fast PID control loops, the CGY755 sets standards in its class! With the appropriate programming parameters, the CGY755 can be perfectly programmed for both 3D and F3C aerobatics.\u003cbr\u003e\nParameters can be set either wirelessly via the transmitter or the GPB-1 programming box (via trainer port). The gyro housing is made of high-quality anodized aluminum and can be mounted rigidly or damped in the model.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ePowerful 3-in-1 solution with flybarless gyro, tail rotor gyro \u0026amp; governor for electric \u0026amp; combustion drive\u003c\/li\u003e\n\t\u003cli\u003eHigh-quality 3-axis sensors and accelerometers\u003c\/li\u003e\n\t\u003cli\u003eWireless programming\u003c\/li\u003e\n\t\u003cli\u003eServo neutral times 760 µs and 1520 µs\u003c\/li\u003e\n\t\u003cli\u003eEasy Setup for 3D \u0026amp; F3C\u003c\/li\u003e\n\t\u003cli\u003eSupports S.BUS2 telemetry sensors\u003c\/li\u003e\n\t\u003cli\u003eHigh-quality aluminum housing\u003c\/li\u003e\n\t\u003cli\u003eRigid or damped mounting possible\u003c\/li\u003e\n\t\u003cli\u003eProgrammable via GPB-1\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003eTechnical Data \u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOperating voltage: 4.2 - 8.4 V\u003c\/li\u003e\n\t\u003cli\u003eSwashplate types: H3-90; H3-120; H3-140; H4-00; H4-45\u003c\/li\u003e\n\t\u003cli\u003eHead speed range: 700 rpm - 4000 rpm\u003c\/li\u003e\n\t\u003cli\u003eRotation rate: +\/- 1200° \/ s\u003c\/li\u003e\n\t\u003cli\u003eSpeed resolution: 6 rpm\u003c\/li\u003e\n\t\u003cli\u003eServo neutral times: 760 µs and 1520 µs\u003c\/li\u003e\n\t\u003cli\u003eServo frame rate: 70 Hz (analog), 280 Hz (digital 1520 µs), 560 Hz (digital 760 µs)\u003c\/li\u003e\n\t\u003cli\u003eGyro dimensions: 37.5 x 26.8 x 16.0 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: 20.2 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003e\u003cb\u003e\u003cb\u003eScope of Delivery \u003c\/b\u003e\u003c\/b\u003e\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCGY755 3-Axis Heli Gyro and Governor\u003c\/li\u003e\n\t\u003cli\u003eGPB-1 Programming Box\u003c\/li\u003e\n\t\u003cli\u003eAccessory set\u003c\/li\u003e\n\t\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FUTABA","offers":[{"title":"Default Title","offer_id":53647140553047,"sku":"MC-CGY755GPB1","price":335.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/FUTABA-CGY755-Heli-3D-F3C-Kreisel-mit-GPB-1-MC-CGY755GPB1_b_0_6acf8a78-f4eb-46bb-bab8-e589a5897a3d.jpg?v=1779917979"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/collections\/heli-elektronik.jpg?v=1771334635","url":"https:\/\/hoelleinshop.com\/en\/collections\/flugmodelle-hubschrauber-zubehor-elektronik.oembed","provider":"hoelleinshop","version":"1.0","type":"link"}