{"product_id":"powerbox-mercury-sr2-incl-sensorswitch-und-oled-display-m-4130","title":"PowerBox Mercury SR2 including SensorSwitch and OLED Display M, #4130","description":"\u003ch1\u003ePowerBox Mercury SR2 incl. SensorSwitch and\u003cbr\u003e\nOLED-Display M, #4130\u003c\/h1\u003e\n\n\u003cp\u003eThe \u003cb\u003ePowerBox Mercury SR2\u003c\/b\u003e is the first choice when a small, powerful power supply with maximum functionality is required. All features otherwise only found in larger power supplies are included in the compact \u003cb\u003ePowerBox Mercury SR2\u003c\/b\u003e: iGyro, servo matching, free channel assignment, and even a door sequencer make the system complete!\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cb\u003ePowerBox Mercury SR2\u003c\/b\u003e offers 16 freely assignable outputs, all of which can be individually adjusted at 5 points via servo matching. For models with larger control surfaces where 2 servos act on the same rudder, the unique Automatch function can precisely match the two servos in a few seconds.\u003cbr\u003e\nThe integrated iGyro software requires an \u003cb\u003eiGyro SAT\u003c\/b\u003e as a sensor unit - this allows 3 aileron, 3 elevator, and 3 rudder functions to be individually controlled and set. The setup assistant simplifies the configuration of the gyro system and reduces the effort to just a few minutes. During the initial setup, the assistant gathers information about the wing, tailplane shape, and any existing vector thrust. A complex model matrix then calculates in the background which servo is connected to which output and links the corresponding gyro function. A whole range of expert settings also offer all the freedom to adapt the gyro system to individual needs.\u003c\/p\u003e\n\n\u003cp\u003eAdditionally, the \u003cb\u003eGPS III\u003c\/b\u003e or the \u003cb\u003ePBS-TAV\u003c\/b\u003e (True-Airspeed-Vario) can be connected to the FastTrack input. This adapts the gyro sensitivity to the flight speed. All GPS or TAV information is also available for telemetry in the transmitter!\u003c\/p\u003e\n\n\u003cp\u003eThe output voltage of the \u003cb\u003ePowerBox Mercury SR2\u003c\/b\u003e is regulated and can be set to 6.0V or 7.8V. The power of the two voltage regulators is generously dimensioned by the milled aluminum heat sink on the top and bottom and easily handles power-hungry servos in 3D machines.\u003cbr\u003e\nThe integrated door sequencer can control one landing gear and up to three doors. With the help of the adjustment assistant, the end points of the doors are taught in a few minutes. Three predefined modes cover most landing gear sequences. Afterwards, the timings of the sequence control can be manually adjusted as desired.\u003cbr\u003e\nFor PowerBox and Jeti pilots, the \u003cb\u003ePowerBox Mercury SR2\u003c\/b\u003e is almost completely* controllable and adjustable from the transmitter! Telemetry for battery and receiver data is fully implemented for all supported systems.\u003c\/p\u003e\n\n\u003cp\u003e*except sequencer and setup assistant\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e16 outputs\u003c\/li\u003e\n\t\u003cli\u003epowerful battery switch with high continuous load capacity\u003c\/li\u003e\n\t\u003cli\u003esunlight-readable OLED display\u003c\/li\u003e\n\t\u003cli\u003ebilingual menu navigation\u003c\/li\u003e\n\t\u003cli\u003econsistently redundant design of the power electronics\u003c\/li\u003e\n\t\u003cli\u003eredundant electronic switch\u003c\/li\u003e\n\t\u003cli\u003eservo matching for all 16 outputs\u003c\/li\u003e\n\t\u003cli\u003eAutomatching function\u003c\/li\u003e\n\t\u003cli\u003eDoor sequencer with setup assistant\u003c\/li\u003e\n\t\u003cli\u003elatest iGyro technology integrated, with the iGyroSAT as gyro sensor\u003c\/li\u003e\n\t\u003cli\u003e9 independent gyro outputs for: 3x aileron, 3x elevator, 3x rudder\u003c\/li\u003e\n\t\u003cli\u003etwo selectable output voltages: 6.0V or 7.8V\u003c\/li\u003e\n\t\u003cli\u003eoptional with GPS III or PBS-TAV for speed-dependent gyro compensation\u003c\/li\u003e\n\t\u003cli\u003eTelemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link, JR X-BUS and Graupner HoTT\u003c\/li\u003e\n\t\u003cli\u003eTransmission of battery, receiver and GPS data\u003c\/li\u003e\n\t\u003cli\u003ealmost complete operability from the transmitter for PowerBox and Jeti\u003c\/li\u003e\n\t\u003cli\u003eadjustable servo frame rate: 12ms, 14ms, 16ms, 18ms\u003c\/li\u003e\n\t\u003cli\u003esuppression of servo back currents\u003c\/li\u003e\n\t\u003cli\u003eupdatable with the PowerBox USB Interface or Mobile Terminal\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical Data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eOperating voltage: 4.0V - 9.0V\u003c\/li\u003e\n\t\u003cli\u003ePower supply: 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiCd\/NiMH\u003c\/li\u003e\n\t\u003cli\u003eCurrent consumption: Operating - 100mA\u003c\/li\u003e\n\t\u003cli\u003eCurrent consumption: Standby - 30µA\u003c\/li\u003e\n\t\u003cli\u003eCurrent rating: 2 x 20A (\u0026lt;30s)\u003c\/li\u003e\n\t\u003cli\u003eDropout voltage: 0.3V\u003c\/li\u003e\n\t\u003cli\u003eOutput voltage: 6.0V \/ 7.8V\u003c\/li\u003e\n\t\u003cli\u003eSignal input: serial\u003c\/li\u003e\n\t\u003cli\u003eSupported remote control systems: PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott\u003c\/li\u003e\n\t\u003cli\u003eSupported telemetry systems: P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott, X.BUS\u003c\/li\u003e\n\t\u003cli\u003eReceiver redundancy: SRS\u003c\/li\u003e\n\t\u003cli\u003eChannels: 26\u003c\/li\u003e\n\t\u003cli\u003eTotal servo outputs: 16\u003c\/li\u003e\n\t\u003cli\u003eProgrammable servo outputs: 16\u003c\/li\u003e\n\t\u003cli\u003eGyro system, software integrated: yes\u003c\/li\u003e\n\t\u003cli\u003eGyro sensor type: external iGyro SAT\u003c\/li\u003e\n\t\u003cli\u003eDisplay: OLED-Display M\u003c\/li\u003e\n\t\u003cli\u003eDoor sequencer integrated: yes\u003c\/li\u003e\n\t\u003cli\u003eDimensions: 89 x 54 x 19 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: 75 g\u003c\/li\u003e\n\t\u003cli\u003eSwitch weight: 15 g\u003c\/li\u003e\n\t\u003cli\u003eDisplay weight: 34 g\u003c\/li\u003e\n\t\u003cli\u003eTemperature range: -30°C to +105°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eScope of Delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ePowerBox Mercury SR2\u003c\/li\u003e\n\t\u003cli\u003eOLED Display M\u003c\/li\u003e\n\t\u003cli\u003eSensorSwitch NG\u003c\/li\u003e\n\t\u003cli\u003e2 patch cables\u003c\/li\u003e\n\t\u003cli\u003e4 rubber grommets and brass sleeves\u003c\/li\u003e\n\t\u003cli\u003e8 mounting screws\u003c\/li\u003e\n\t\u003cli\u003eOperating instructions in German and English\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"PowerBox Systems DEUTSCH","offers":[{"title":"Default Title","offer_id":53445744722263,"sku":"MD4130","price":349.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/MD4130_b1_60e68129-57dd-448d-a1bc-1e882b9a7e38.jpg?v=1779808413","url":"https:\/\/hoelleinshop.com\/en\/products\/powerbox-mercury-sr2-incl-sensorswitch-und-oled-display-m-4130","provider":"hoelleinshop","version":"1.0","type":"link"}