{"product_id":"schleppkupplung-mit-flitschenhaken-fur-15-mm-servo-wemo-sk-f15","title":"Tow release with quick-release hook for 15 mm servo, Wemo # SK-F15","description":"\u003ch1\u003e\u003cspan\u003eTow release with catapult hook for 15 mm servo Wemo # SK-F\u003c\/span\u003e\u003c\/h1\u003e\n\n\u003cp\u003eThe tow release is particularly suitable for models with an FES motor, as the tow rope cannot be used through the fuselage nose due to the motor.\u003c\/p\u003e\n\n\u003cp\u003eThe coupling can be installed anywhere on the fuselage.\u003c\/p\u003e\n\n\u003cp\u003eAdditionally, a catapult hook can be inserted into the tow release. This allows the model to be launched over the slope edge when flying in the Alps.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMade from high-strength aluminum AW 7075\u003c\/li\u003e\n\t\u003cli\u003eBrass body with very strong spring and 3.0 mm steel pin\u003c\/li\u003e\n\t\u003cli\u003eMiniature Bowden cable with steel core and 1.3 mm steel wire \/ galvanized\u003c\/li\u003e\n\t\u003cli\u003eServo mount made of black GRP (with abutment for the Bowden cable) \u003cb\u003efor 15 mm servo\u003c\/b\u003e\n\u003c\/li\u003e\n\t\u003cli\u003e4.0 mm wooden board for gluing into the fuselage and mounting the servo holder\u003c\/li\u003e\n\t\u003cli\u003e2 wooden adhesive pieces for routing the Bowden cable\u003c\/li\u003e\n\t\u003cli\u003eM2 clevis (steel wire is soldered directly into the clevis)\u003c\/li\u003e\n\t\u003cli\u003eScrews and self-locking nuts in M3 for servo installation\u003c\/li\u003e\n\t\u003cli\u003eVery low profile, so that, for example, batteries can be installed above the coupling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBy using the Bowden cable, the servo for operating the pin can be attached at any conceivable location in the fuselage. This creates entirely new possibilities.\u003c\/p\u003e\n\n\u003cp\u003eThe catapult hook has an angled 5.0 mm stainless steel pin, which is pinned and glued to the insert. Due to the oval shape, the insert can be easily inserted into the tow release from below. This works immediately, guaranteed. The locking is then done by the pin.\u003c\/p\u003e\n\n\u003cp\u003eSimilarly, due to the oval shape, it is very easy to bring the rope loop into position when attaching the tow rope. The loop is virtually force-guided and cannot twist. This works immediately, also guaranteed. The locking is then done by the pin.\u003c\/p\u003e\n\n\u003cp\u003eATTENTION: Please note that the locking pin is spring-loaded. This means that after releasing the tow rope, the button\/switch on the remote control must be returned to its original position, otherwise the servo will constantly have to work against the spring force!\u003c\/p\u003e\n\n\u003cp\u003eLength of Bowden cable \/ steel wire = \u003cb\u003e500 mm \/ 550 mm \u003c\/b\u003e\u003cspan\u003e(other lengths can be manufactured if required)\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe kit includes all the parts required for assembly (see first picture with all parts).\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCoupling body (made of high-strength aluminum AW 7075)\u003c\/li\u003e\n\t\u003cli\u003eCatapult hook (made of high-strength aluminum AW 7075)\u003c\/li\u003e\n\t\u003cli\u003eBrass body with strong spring and 3.0 mm steel pin\u003c\/li\u003e\n\t\u003cli\u003eMiniature Bowden cable with steel core and 1.3 mm steel wire \/ galvanized and easily solderable\u003c\/li\u003e\n\t\u003cli\u003eServo mount made of black GRP (with abutment for the Bowden cable) for 15mm servo\u003c\/li\u003e\n\t\u003cli\u003e4.0 mm wooden board for gluing into the fuselage and mounting the servo holder\u003c\/li\u003e\n\t\u003cli\u003e4 pieces M2 x 8 mm cylinder head screws for mounting the servo on the\u003cbr\u003e\n\twooden board\u003c\/li\u003e\n\t\u003cli\u003e2 wooden adhesive pieces for routing the Bowden cable\u003c\/li\u003e\n\t\u003cli\u003e2 pieces of heat shrink tubing with adhesive\u003c\/li\u003e\n\t\u003cli\u003e2 abutments (one of which is already screwed into the brass body)\u003c\/li\u003e\n\t\u003cli\u003eM2 clevis (steel wire is soldered directly into the clevis)\u003c\/li\u003e\n\t\u003cli\u003eScrews and self-locking nuts in M3 for servo installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WEMO-Einziehfahrwerke GmbH","offers":[{"title":"Default Title","offer_id":53449000780119,"sku":"WEMO-SK-F15","price":75.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/WEMO-SK-F15_b1.jpg?v=1780986304","url":"https:\/\/hoelleinshop.com\/en\/products\/schleppkupplung-mit-flitschenhaken-fur-15-mm-servo-wemo-sk-f15","provider":"hoelleinshop","version":"1.0","type":"link"}