{"product_id":"schleppkupplung-mit-flitschenhaken-fur-20-mm-servo-wemo-sk-f20","title":"Tow Release with Flipping Hook for 20 mm Servo, Wemo # SK-F20","description":"\u003ch1\u003e\u003cspan\u003eTowing coupling with hi-start hook for 20 mm servo Wemo # SK-F\u003c\/span\u003e\u003c\/h1\u003e\n\n\u003cp\u003eThe towing coupling is particularly suitable for models with FES motors, as the tow rope cannot be used through the nose of the fuselage due to the motor.\u003c\/p\u003e\n\n\u003cp\u003eThe coupling can be installed anywhere on the fuselage.\u003c\/p\u003e\n\n\u003cp\u003eAdditionally, a hi-start hook can be inserted into the towing coupling. This allows the model to be launched over a slope edge when flying in alpine terrain.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eMade from high-strength aluminum AW 7075\u003c\/li\u003e\n\t\u003cli\u003eBrass body with very strong spring and 3.0 mm steel pin\u003c\/li\u003e\n\t\u003cli\u003eMiniature Bowden cable with steel core and 1.3 mm steel wire \/ galvanized\u003c\/li\u003e\n\t\u003cli\u003eServo mount made of black GRP (with abutment for the Bowden cable) \u003cb\u003efor 20 mm standard servo\u003c\/b\u003e\n\u003c\/li\u003e\n\t\u003cli\u003e4.0 mm wooden board for gluing into the fuselage and mounting the servo holder\u003c\/li\u003e\n\t\u003cli\u003e2 wooden adhesive pieces for laying the Bowden cable\u003c\/li\u003e\n\t\u003cli\u003eClevis M2 (steel wire is soldered directly into the clevis)\u003c\/li\u003e\n\t\u003cli\u003eScrews and lock nuts in M3 for servo installation\u003c\/li\u003e\n\t\u003cli\u003eVery low profile, allowing, for example, batteries to be installed above the coupling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBy using the Bowden cable, the servo for operating the pin can be attached at any conceivable position in the fuselage. This creates entirely new possibilities.\u003c\/p\u003e\n\n\u003cp\u003eThe hi-start hook has an angled 5.0 mm stainless steel pin, which is pinned and glued to the insert. Due to the oval shape, the insert can be very easily inserted into the towing coupling from below. This works immediately, we promise. The locking then takes place via the pin.\u003c\/p\u003e\n\n\u003cp\u003eSimilarly, due to the oval shape, it is very easy to position the rope loop when attaching the tow rope. The loop is virtually force-guided and cannot rotate. This also works immediately, we promise. The locking then takes place via the pin.\u003c\/p\u003e\n\n\u003cp\u003eATTENTION: It is important to note that the locking pin is spring-loaded. This means that after releasing the tow rope, the button\/switch on the remote control must be returned to its initial position, otherwise the servo will constantly have to work against the spring force!\u003c\/p\u003e\n\n\u003cp\u003eLength of Bowden cable \/ steel wire = \u003cb\u003e500 mm \/ 550 mm\u003c\/b\u003e \u003cspan\u003e(other lengths can be produced if required)\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe kit includes all the necessary parts for assembly (see first picture with all parts).\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eScope of delivery:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCoupling body (made of high-strength aluminum AW 7075)\u003c\/li\u003e\n\t\u003cli\u003eHi-start hook (made of high-strength aluminum AW 7075)\u003c\/li\u003e\n\t\u003cli\u003eBrass body with strong spring and 3.0 mm steel pin\u003c\/li\u003e\n\t\u003cli\u003eMiniature Bowden cable with steel core and 1.3 mm steel wire \/ galvanized and easily solderable\u003c\/li\u003e\n\t\u003cli\u003eServo mount made of black GRP (with abutment for the Bowden cable) for 20 mm standard servo\u003c\/li\u003e\n\t\u003cli\u003e4.0 mm wooden board for gluing into the fuselage and mounting the servo holder\u003c\/li\u003e\n\t\u003cli\u003e4 pieces M2 x 8 mm cylinder head screws for mounting the servo on the\u003cbr\u003e\n\twooden board\u003c\/li\u003e\n\t\u003cli\u003e2 wooden adhesive pieces for laying the Bowden cable\u003c\/li\u003e\n\t\u003cli\u003e2 pieces of heat shrink tubing with adhesive\u003c\/li\u003e\n\t\u003cli\u003e2 abutments (one of which is already screwed into the brass body)\u003c\/li\u003e\n\t\u003cli\u003eClevis M2 (steel wire is soldered directly into the clevis)\u003c\/li\u003e\n\t\u003cli\u003eScrews and lock nuts in M3 for servo installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WEMO-Einziehfahrwerke GmbH","offers":[{"title":"Default Title","offer_id":53449001173335,"sku":"WEMO-SK-F20","price":75.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/WEMO-SK-F20_b1_f7da977d-3e7e-4210-8dc8-89c208cf03f9.jpg?v=1779936040","url":"https:\/\/hoelleinshop.com\/en\/products\/schleppkupplung-mit-flitschenhaken-fur-20-mm-servo-wemo-sk-f20","provider":"hoelleinshop","version":"1.0","type":"link"}