{"product_id":"unisens-e-280-a-mit-6-mm-lmt-goldstecker-sm-modellbau-3114","title":"UniSens-E 280 A with 6 mm LMT Gold Connector, SM-Modellbau # 3114","description":"\u003ch1\u003eUniSens-E 280 A with 6 mm LMT Gold Connector SM # 3114\u003c\/h1\u003e\n\n\u003cp\u003e With improved altimeter sensor V2 The small, powerful RC telemetry sensor measures and transmits voltage \/ current \/ power \/ capacity \/ energy \/ brushless RPM \/ altitude \/ vario\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe UniSens-E is a dedicated telemetry sensor specifically for all electric models. It is so small and light, yet so powerful, that it can be used in almost any model. In accordance with SM-Modellbau's philosophy of supporting as many systems as possible, the UniSens-E also speaks the language of Jeti Duplex (EX), Multiplex M-Link, Graupner HoTT, Robbe\/Futaba FASSTest, and JR DMSS. The UniSens-E automatically recognizes HoTT telemetry systems out of the box. When used with Jeti, Multiplex, Futaba, or JR, the telemetry must be specified in the settings beforehand. To change settings via PC or for firmware updates, a suitable USB interface, such as part no. 2550, or an existing USB connection cable from Jeti, Multiplex, or Graupner is required. See the manual for more information.\u003c\/p\u003e\n\n\u003cp\u003eWithout additional sensors, the UniSens-E can measure the entire drive system, including voltage, current, capacity, and even RPM. A special feature is the integrated brushless RPM sensor. To measure RPM, only a small cable connection to one of the three motor phases needs to be made with the included cable. Since a barometric (air pressure) altimeter sensor with high resolution is also integrated, the UniSens-E also provides altitude measurement and a vario. Extensive alarms can also be programmed, which are reported via telemetry through the respective transmitter.\u003c\/p\u003e\n\n\u003cp\u003eThe UniSens-E is available with various connector systems, so that no soldering is usually necessary. The current measurement range extends symmetrically in both directions. This means that the connector assignment, i.e., whether the battery has male or female at the positive pole, does not matter. The measurement direction is simply set in the setup. All measured values of the UniSens-E can also be viewed live directly via our UniDisplay, and all settings and alarms can be programmed.\u003c\/p\u003e\n\n\u003cp\u003eWhether gliders, aerobatic aircraft, helicopters, HLG, or slow flyers, the UniSens-E can be used in almost any area due to its low weight and compact size. Of course, the UniSens-E is not only suitable for model aircraft. It can also be installed in RC boats, RC cars, etc.\u003c\/p\u003e\n\n\u003cp\u003eWith the UniSens-E, you acquire a powerful, universal RC telemetry sensor in every respect, which utilizes the possibilities of modern electronics to be a great help to you in handling your RC models.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cb\u003eAnd this is what the UniSens-E can do:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ecomplete measurement of electric drives with current, voltage, power, capacity, RPM, and altitude measurement\u003c\/li\u003e\n\t\u003cli\u003eintegrated brushless RPM sensor\u003c\/li\u003e\n\t\u003cli\u003efull telemetry support for Jeti Duplex (EX), PowerBox Core, Multiplex M-Link, Graupner HoTT, Futaba FASSTest S.BUS2, JR DMSS, Fr Sky and Spektrum\u003c\/li\u003e\n\t\u003cli\u003ealtitude measurement with automatic zeroing after power-on barometric vario\u003c\/li\u003e\n\t\u003cli\u003ecurrent measurement range up to 280 A in both directions, voltage up to 60 V\u003c\/li\u003e\n\t\u003cli\u003econnection for receiver signal for remote control of certain functions\u003c\/li\u003e\n\t\u003cli\u003edirect connection to GPS-Logger 2 possible for data recording in a file\u003c\/li\u003e\n\t\u003cli\u003emeasurement of receiver battery voltage\u003c\/li\u003e\n\t\u003cli\u003epower supply from receiver\u003c\/li\u003e\n\t\u003cli\u003ecurrent status is signaled by LED\u003c\/li\u003e\n\t\u003cli\u003edirect viewing of live or recorded measured values with our UniDisplay\u003c\/li\u003e\n\t\u003cli\u003eparameter settings via PC, UniDisplay and telemetry possible\u003c\/li\u003e\n\t\u003cli\u003ePC software for settings and updates (SM UniSens-E Tool)\u003c\/li\u003e\n\t\u003cli\u003efree firmware updates via PC with our USB interface (part no. 2550) or with existing USB connection cables from Jeti, Multiplex or Graupner (the firmware file can be found here)\u003c\/li\u003e\n\t\u003cli\u003ecan be used almost anywhere due to its compact size and low weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eFor technical data and the complete range of functions, please refer to the operating instructions.\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTypical wiring examples of the UniSens-E in the model:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e1. altitude measurement only with altimeter sensor already integrated in the UniSens-E application\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e2. electric drive measurement\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ecurrent measurement range: 280 A in both directions, i.e., - 280 A to + 280 A\u003c\/li\u003e\n\t\u003cli\u003eThe following load durations are permissible: - 200 A unlimited - 240 A for 1 minute - 280 A for 20 seconds. (However, depending on the plug system, the limits are significantly lower!) Useful values with 6 mm LMT gold connector: Continuous: 140 A \/ 20s: 160 A, 2 x 4mm² silicone cable: Continuous: 160 A \/ 20s: 200A\u003c\/li\u003e\n\t\u003cli\u003evoltage measurement range: 0 to 60 V\u003c\/li\u003e\n\t\u003cli\u003ealtitude measurement range: 0 to 8000 m above sea level, automatically zeroed when switched on\u003c\/li\u003e\n\t\u003cli\u003ereceiver voltage measurement: 3.8 V to 10 V\u003c\/li\u003e\n\t\u003cli\u003edata rate: 10 Hz\u003c\/li\u003e\n\t\u003cli\u003epower supply from receiver power supply via the telemetry connection (from 3.8 V to a maximum of 10 V)\u003c\/li\u003e\n\t\u003cli\u003epower consumption: approx. 25 mA\u003c\/li\u003e\n\t\u003cli\u003eexternal connections: 1 x connection for telemetry and power supply 1 x phase connection for brushless RPM measurement 1 x servo pulse input from receiver COM connection for UniDisplay, GPS-Logger or PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003egreen MPX connector: 26 (38) x 29 x 9 mm\u003c\/li\u003e\n\t\u003cli\u003eyellow XT60 connector: 26 (50) x 29 x 9 mm\u003c\/li\u003e\n\t\u003cli\u003e4 mm gold connector: 26 (55) x 22 x 9 mm 5.5 mm gold connector: 26 (44) x 22 x 11 mm\u003c\/li\u003e\n\t\u003cli\u003e6 mm LMT gold connector: 26 (42) x 22 x 11 mm\u003c\/li\u003e\n\t\u003cli\u003eweight: 17g - 30g\u003c\/li\u003e\n\t\u003cli\u003eweight: 10 g - 14 g without cable (depending on plug system), connection cable 4 g\u003c\/li\u003e\n\t\u003cli\u003escope of delivery: UniSens-E with integrated altimeter \/ vario connection cable to receiver for telemetry \/ power supply connection cable for brushless RPM measurement detailed colored operating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448698397015,"sku":"SM3114","price":86.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM3114_b1_e95865bc-a7ac-4099-8cf8-b98f66ef729f.jpg?v=1779817881","url":"https:\/\/hoelleinshop.com\/en\/products\/unisens-e-280-a-mit-6-mm-lmt-goldstecker-sm-modellbau-3114","provider":"hoelleinshop","version":"1.0","type":"link"}