{"product_id":"unisens-e-mit-4mm-goldkontaktsteckverbindung-sm-modellbau-3102","title":"UniSens-E with 4mm gold-plated connector, SM-Modellbau # 3102","description":"\u003ch1\u003eUniSens-E with 4mm gold connector SM # 3102\u003c\/h1\u003e\n\n\u003cp\u003eWith improved V2 altitude sensor. The small, powerful RC telemetry sensor measures and transmits voltage \/ current \/ power \/ capacity \/ energy \/ brushless RPM \/ altitude \/ variometer.\u003c\/p\u003e\n\n\u003cp\u003eThe UniSens-E is a pure telemetry sensor specifically for all electric models. It is so small and light, yet so powerful that it can be used in almost any model. In accordance with SM-Modellbau's philosophy of supporting as many systems as possible, the UniSens-E also speaks the language of Jeti Duplex (EX), Multiplex M-Link, Graupner HoTT, Robbe\/Futaba FASSTest, and JR DMSS. The UniSens-E automatically recognizes HoTT telemetry systems when delivered. When used with Jeti, Multiplex, Futaba, or JR, the telemetry must be specified in the settings beforehand. To change settings via PC or for firmware updates, a suitable USB interface such as item no. 2550 or an existing USB connection cable from Jeti, Multiplex, or Graupner is required. Please refer to the manual for more information.\u003c\/p\u003e\n\n\u003cp\u003eWithout additional sensors, the UniSens-E can measure the entire drive system, i.e., voltage, current, capacity, and even RPM. A brushless RPM sensor is already built in as a special feature. To measure the RPM, only a small cable connection to one of the three motor phases needs to be made with the enclosed cable. Since a barometric (air pressure) altitude sensor with high resolution is also integrated, in addition to altitude measurement, a variometer is also realized with the UniSens-E. Extensive alarms can also be programmed, which are reported via telemetry through the respective transmitter.\u003c\/p\u003e\n\n\u003cp\u003eThe UniSens-E is available with various connector systems, so soldering is usually not necessary. The current measurement range extends symmetrically in both directions. This means that the connector assignment, i.e., whether the battery has male or female on the positive pole, does not matter. The measurement direction is simply set in the setup. All measured values of the UniSens-E can also be viewed live directly via our UniDisplay, and all settings and alarms can be programmed.\u003c\/p\u003e\n\n\u003cp\u003eWhether glider, aerobatic aircraft, helicopter, HLG, or slow flyer, the UniSens-E can be used in almost any area due to its low weight and compact size. Of course, the UniSens-E is not only suitable for flight models. It can also be installed in RC boats, RC cars, etc.\u003c\/p\u003e\n\n\u003cp\u003eWith the UniSens-E, you acquire a powerful universal RC telemetry sensor in all respects, which utilizes the possibilities of modern electronics to be a great help to you as a small helper in dealing with your RC models.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cb\u003eAnd this is what the UniSens-E can do:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eComplete measurement of electric drives with current, voltage, power, capacity, RPM, and altitude measurement\u003c\/li\u003e\n\t\u003cli\u003eIntegrated brushless RPM sensor\u003c\/li\u003e\n\t\u003cli\u003eFull telemetry support for Jeti Duplex (EX), PowerBox Core, Multiplex M-Link, Graupner HoTT, Futaba FASSTest S.BUS2, JR DMSS, Fr Sky, and Spektrum\u003c\/li\u003e\n\t\u003cli\u003eAltitude measurement with automatic zeroing after power-on, barometric variometer\u003c\/li\u003e\n\t\u003cli\u003eCurrent measurement range up to 140 A in both directions, voltage up to 60 V (however, the maximum current carrying capacity of the connectors used must not be exceeded!)\u003c\/li\u003e\n\t\u003cli\u003eConnection for receiver signal for remote control of certain functions\u003c\/li\u003e\n\t\u003cli\u003eDirect connection to GPS logger possible for data recording in a file\u003c\/li\u003e\n\t\u003cli\u003eMeasurement of receiver battery voltage\u003c\/li\u003e\n\t\u003cli\u003ePower supply by receiver\u003c\/li\u003e\n\t\u003cli\u003eCurrent status is signaled via LED\u003c\/li\u003e\n\t\u003cli\u003eDirect viewing of measured values live or recorded with our UniDisplay\u003c\/li\u003e\n\t\u003cli\u003eParameter settings possible via PC, UniDisplay, and telemetry\u003c\/li\u003e\n\t\u003cli\u003ePC software for settings and updates (SM UniSens-E Tool)\u003c\/li\u003e\n\t\u003cli\u003eFree firmware updates via PC with our USB interface (item no. 2550) or with existing USB connection cables from Jeti, Multiplex, or Graupner (the firmware file can be found here)\u003c\/li\u003e\n\t\u003cli\u003eCan be used almost anywhere due to its compact size and low weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eFor technical data and the complete range of functions, please refer to the operating instructions.\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTypical wiring examples of the UniSens-E in the model:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e1. Altitude measurement only with altitude sensor integrated in UniSens-E, e.g., for F3B \/ F3J gliders\u003c\/p\u003e\n\n\u003cp\u003e2. Electric drive measurement\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCurrent measurement range: 140 A in both directions, i.e., -140 A to +140 A\u003c\/li\u003e\n\t\u003cli\u003eThe following load durations are permissible: - 100 A unlimited - 120 A for 1 minute - 140 A for 20 seconds (However, depending on the connector system, the limits of the connectors are significantly lower!) Useful values are with - MPX green (double contact) and XT60 continuous: 50 A \/ 20A\u003c\/li\u003e\n\t\u003cli\u003eVoltage measurement range: 0 to 60 V\u003c\/li\u003e\n\t\u003cli\u003eAltitude measurement range: 0 to 8000 m above sea level, automatically zeroed when switched on\u003c\/li\u003e\n\t\u003cli\u003eReceiver voltage measurement: 3.8 V to 10 V\u003c\/li\u003e\n\t\u003cli\u003eData rate: 10 Hz\u003c\/li\u003e\n\t\u003cli\u003ePower supply from receiver power supply via the telemetry connection (from 3.8 V to a maximum of 10 V)\u003c\/li\u003e\n\t\u003cli\u003ePower consumption: approx. 25 mA\u003c\/li\u003e\n\t\u003cli\u003eExternal connections: 1 connection for telemetry and power supply 1 phase connection for brushless RPM measurement 1 servo pulse input from the receiver COM connection for UniDisplay, GPS logger or PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eGreen MPX connector: 26 (38) x 29 x 9 mm\u003c\/li\u003e\n\t\u003cli\u003eYellow XT60 connector: 26 (50) x 29 x 9 mm\u003c\/li\u003e\n\t\u003cli\u003e4 mm gold connector: 26 (55) x 22 x 9 mm 5.5 mm gold connector: 26 (44) x 22 x 11 mm\u003c\/li\u003e\n\t\u003cli\u003e6 mm LMT gold connector: 26 (42) x 22 x 11 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: 10 g - 14 g without cable (depending on connector system), connection cable 4 g\u003c\/li\u003e\n\t\u003cli\u003eScope of delivery: UniSens-E with integrated altitude sensor \/ variometer Connection cable to receiver for telemetry \/ power supply Connection cable for brushless RPM measurement Detailed color operating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448681357655,"sku":"SM3102","price":65.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM3102_b1.jpg?v=1780142919","url":"https:\/\/hoelleinshop.com\/en\/products\/unisens-e-mit-4mm-goldkontaktsteckverbindung-sm-modellbau-3102","provider":"hoelleinshop","version":"1.0","type":"link"}