{"product_id":"unisens-e-mit-6-mm-lmt-goldkontaktsteckverbindung-sm-modellbau-3104","title":"UniSens-E with 6mm LMT Gold Contact Plug, SM-Modellbau # 3104","description":"\u003ch1\u003eUniSens-E with 6mm gold connector SM # 3104\u003c\/h1\u003e\n\n\u003cp\u003eWith improved altitude sensor V2 The small, powerful RC telemetry sensor measures and transmits voltage \/ current \/ power \/ capacity \/ energy \/ brushless speed \/ altitude \/ Vario\u003c\/p\u003e\n\n\u003cp\u003eThe UniSens-E is a pure telemetry sensor specially designed for all electric models. It is so small and light, yet so powerful that it can be used in almost any model. In line with SM-Modellbau's philosophy of supporting as many systems as possible, the UniSens-E also speaks the language of Jeti Duplex (EX), Multiplex M-Link, Graupner HoTT, Robbe\/Futaba FASSTest and JR DMSS. The UniSens-E automatically detects HoTT telemetry systems when delivered. When used with Jeti, Multiplex, Futaba or JR, the telemetry must be specified in the settings beforehand. To change settings via PC or for firmware updates, a suitable USB interface such as item no. 2550 or an existing USB connection cable from Jeti, Multiplex or Graupner is required. Please refer to the manual for more information.\u003c\/p\u003e\n\n\u003cp\u003eWithout additional sensors, the UniSens-E can measure the entire drive, i.e. voltage, current, capacity and even speed. A brushless speed sensor is already permanently installed as a special highlight. For speed measurement, only a small cable connection to one of the three motor phases needs to be made with the enclosed cable. Since a barometric (air pressure) altitude sensor with high resolution is also integrated, a Vario is also realized with the UniSens-E in addition to altitude measurement. Extensive alarms can also be programmed, which are reported via telemetry via the respective transmitter.\u003c\/p\u003e\n\n\u003cp\u003eThe UniSens-E is available with various connector systems, so that no soldering is usually necessary. The current measuring range extends symmetrically in both directions. This means that the connector assignment, i.e. whether the battery has a male or female connector on the positive pole, does not matter. The measuring direction is simply set in the setup. Via our UniDisplay, all measured values of the UniSens-E can also be viewed live and all settings and alarms can be programmed.\u003c\/p\u003e\n\n\u003cp\u003eWhether gliders, aerobatic aircraft, helicopters, HLG or slow flyers, the UniSens-E can be used in almost any area due to its low weight and compact size. Of course, the UniSens-E is not only suitable for model aircraft. It can also be installed in RC boats, RC cars, etc.\u003c\/p\u003e\n\n\u003cp\u003eWith the UniSens-E, you acquire a powerful universal RC telemetry sensor in all respects, which utilizes the possibilities of modern electronics to be a great help to you as a small helper in dealing with your RC models.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cb\u003eAnd this is what the UniSens-E can do:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ecomplete measurement of electric drives with current, voltage, power, capacity, speed and altitude measurement\u003c\/li\u003e\n\t\u003cli\u003eintegrated brushless speed sensor\u003c\/li\u003e\n\t\u003cli\u003efull telemetry support for Jeti Duplex (EX), PowerBox Core, Multiplex M-Link, Graupner HoTT, Futaba FASSTest S.BUS2, JR DMSS, Fr Sky and Spektrum\u003c\/li\u003e\n\t\u003cli\u003ealtitude measurement with automatic zeroing after switching on barometric Vario\u003c\/li\u003e\n\t\u003cli\u003ecurrent measuring range up to 140 A in both directions, voltage up to 60 V (the maximum current carrying capacity of the connectors used must not be exceeded!)\u003c\/li\u003e\n\t\u003cli\u003econnection for receiver signal for remote control of certain functions\u003c\/li\u003e\n\t\u003cli\u003edirect connection to the GPS logger possible for data recording in a file\u003c\/li\u003e\n\t\u003cli\u003emeasurement of receiver battery voltage\u003c\/li\u003e\n\t\u003cli\u003epower supply by receiver\u003c\/li\u003e\n\t\u003cli\u003ecurrent status is signaled by LED\u003c\/li\u003e\n\t\u003cli\u003edirect viewing of live or recorded measured values with our UniDisplay\u003c\/li\u003e\n\t\u003cli\u003eparameter settings via PC, UniDisplay and telemetry possible\u003c\/li\u003e\n\t\u003cli\u003ePC software for settings and updates (SM UniSens-E Tool)\u003c\/li\u003e\n\t\u003cli\u003efree firmware updates via PC with our USB interface (item no. 2550) or with existing USB connection cables such as from Jeti, Multiplex or Graupner (the firmware file can be found here)\u003c\/li\u003e\n\t\u003cli\u003ecan be used almost anywhere due to its compact size and low weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003ePlease refer to the operating manual for technical data and the complete range of functions.\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTypical wiring examples of the UniSens-E in the model:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e1. only altitude measurement with altitude sensor already integrated in UniSens-E, e.g. in F3B \/ F3J gliders\u003c\/p\u003e\n\n\u003cp\u003e2. electric drive measurement\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cb\u003eTechnical data:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ecurrent measuring range: 140 A in both directions, i.e. - 140 A to + 140 A\u003c\/li\u003e\n\t\u003cli\u003eThe following load durations are permissible: - 100 A unlimited - 120 A for 1 minute - 140 A for 20 seconds (Depending on the connector system, however, the limits of the connectors are significantly lower!) Useful values are with - MPX green (double contact) and XT60 continuous: 50 A \/ 20A\u003c\/li\u003e\n\t\u003cli\u003evoltage measuring range: 0 to 60 V\u003c\/li\u003e\n\t\u003cli\u003ealtitude measuring range: 0 to 8000 m above sea level, automatically zeroed when switched on\u003c\/li\u003e\n\t\u003cli\u003ereceiver voltage measurement: 3.8 V to 10 V\u003c\/li\u003e\n\t\u003cli\u003edata rate: 10 Hz\u003c\/li\u003e\n\t\u003cli\u003epower supply from receiver power supply via the telemetry connection (from 3.8 V to a maximum of 10 V)\u003c\/li\u003e\n\t\u003cli\u003epower consumption: approx. 25 mA\u003c\/li\u003e\n\t\u003cli\u003eexternal connections: 1 x connection for telemetry and power supply 1 x phase connection for brushless speed measurement 1 x servo pulse input from the receiver COM connection for UniDisplay, GPS logger or PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003egreen MPX connector: 26 (38) x 29 x 9 mm\u003c\/li\u003e\n\t\u003cli\u003eyellow XT60 connector: 26 (50) x 29 x 9 mm\u003c\/li\u003e\n\t\u003cli\u003e4 mm gold connector: 26 (55) x 22 x 9 mm 5.5 mm gold connector: 26 (44) x 22 x 11 mm\u003c\/li\u003e\n\t\u003cli\u003e6 mm LMT gold connector: 26 (42) x 22 x 11 mm\u003c\/li\u003e\n\t\u003cli\u003eWeight: 10 g - 14 g without cable (depending on the connector system), connection cable 4 g\u003c\/li\u003e\n\t\u003cli\u003eScope of delivery: UniSens-E with integrated altitude sensor \/ Vario connection cable to the receiver for telemetry \/ power supply connection cable for brushless speed measurement detailed color operating manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448685650263,"sku":"SM3104","price":68.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM3104_b1_d0f31e70-93d8-42e7-a68e-38e535db1e1f.jpg?v=1779817826","url":"https:\/\/hoelleinshop.com\/en\/products\/unisens-e-mit-6-mm-lmt-goldkontaktsteckverbindung-sm-modellbau-3104","provider":"hoelleinshop","version":"1.0","type":"link"}