{"product_id":"unisens-e-mit-mpx-steckverbindung-grun-sm-modellbau-3100","title":"UniSens-E with MPX Connector green, SM-Modellbau # 3100","description":"\u003ch1\u003eUniSens-E with MPX plug connection green SM # 3100\u003c\/h1\u003e\n\n\u003cp\u003eWith improved altitude sensor V2 The small, powerful RC telemetry sensor measures and transmits voltage \/ current \/ power \/ capacity \/ energy \/ brushless speed \/ altitude \/ variometer\u003c\/p\u003e\n\n\u003cp\u003eThe UniSens-E is a pure telemetry sensor especially for all electric models. It is so small and light, yet so powerful, that it can be used in almost any model. In accordance with SM-Modellbau's philosophy of supporting as many systems as possible, the UniSens-E also speaks the language of Jeti Duplex (EX), Multiplex M-Link, Graupner HoTT, Robbe\/Futaba FASSTest and JR DMSS. The UniSens-E automatically recognizes HoTT telemetry systems when delivered. When used with Jeti, Multiplex, Futaba or JR, the telemetry must be specified in the settings beforehand. To change the settings via PC or for firmware updates, a suitable USB interface such as item no. 2550 or an existing USB connection cable from Jeti, Multiplex or Graupner is required. See the instructions for more information.\u003c\/p\u003e\n\n\u003cp\u003eWithout additional sensors, the UniSens-E can measure the entire drive, i.e. voltage, current, capacity and even speed. A brushless speed sensor is already built in as a special feature. To measure the speed, only a small cable connection to one of the three motor phases needs to be made with the enclosed cable. Since a barometric (air pressure) altitude sensor with high resolution is also integrated, a variometer is also realized with the UniSens-E in addition to altitude measurement. Extensive alarms can also be programmed, which are reported via telemetry via the respective transmitter.\u003c\/p\u003e\n\n\u003cp\u003eThe UniSens-E is available with various plug systems, so that usually nothing has to be soldered. The current measurement range extends symmetrically in both directions. This means that the pin assignment, i.e. whether the battery has male or female on the positive pole, does not matter. The measuring direction is simply set in the setup. All measured values of the UniSens-E can also be viewed live directly via our UniDisplay and all settings and alarms can be programmed.\u003c\/p\u003e\n\n\u003cp\u003eWhether glider, aerobatic aircraft, helicopter, HLG or slow flyer, the UniSens-E can be used in almost any area due to its low weight and compact size. Of course, the UniSens-E is not only suitable for model aircraft. It can also be installed in RC boats, RC cars, etc.\u003c\/p\u003e\n\n\u003cp\u003eWith the UniSens-E, you acquire a powerful universal RC telemetry sensor in all respects, which utilizes the possibilities of modern electronics to be a great help to you in dealing with your RC models.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\n\u003cb\u003eAnd this is what the UniSens-E can do:\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ecomplete measurement of electric drives with current, voltage, power, capacity, speed and altitude measurement\u003c\/li\u003e\n\t\u003cli\u003eintegrated brushless speed sensor\u003c\/li\u003e\n\t\u003cli\u003efull telemetry support for Jeti Duplex (EX), PowerBox Core, Multiplex M-Link, Graupner HoTT, Futaba FASSTest S.BUS2, JR DMSS, FrSky and Spektrum\u003c\/li\u003e\n\t\u003cli\u003ebarometric variometer\u003c\/li\u003e\n\t\u003cli\u003ecurrent measuring range up to 140 A in both directions, voltage up to 60 V (however, the maximum current carrying capacity of the plugs used must not be exceeded!)\u003c\/li\u003e\n\t\u003cli\u003econnection for receiver signal for remote control of certain functions\u003c\/li\u003e\n\t\u003cli\u003edirect connection to GPS logger possible for data recording in a file\u003c\/li\u003e\n\t\u003cli\u003emeasurement of receiver battery voltage\u003c\/li\u003e\n\t\u003cli\u003epower supply via receiver\u003c\/li\u003e\n\t\u003cli\u003ecurrent status is signaled via LED\u003c\/li\u003e\n\t\u003cli\u003edirect viewing of measured values live or recorded with our UniDisplay\u003c\/li\u003e\n\t\u003cli\u003eparameter settings via PC, UniDisplay and telemetry possible\u003c\/li\u003e\n\t\u003cli\u003ePC software for settings and updates (SM UniSens-E Tool)\u003c\/li\u003e\n\t\u003cli\u003efree firmware updates via PC with our USB interface (item no. 2550) or with existing USB connection cables from Jeti, Multiplex or Graupner (the firmware file can be found here)\u003c\/li\u003e\n\t\u003cli\u003ecan be used almost anywhere due to its compact size and low weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003ePlease refer to the operating manual for technical data and the complete range of functions.\u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTypical wiring examples of the UniSens-E in the model: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003e1. altitude measurement only with altitude sensor already integrated in the UniSens-E Application e.g. in F3B \/ F3J glider\u003c\/p\u003e\n\n\u003cp\u003e2. electric drive measurement\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eTechnical data: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003ecurrent measuring range: 140 A in both directions, i.e. - 140 A to + 140 A\u003c\/li\u003e\n\t\u003cli\u003eThe following load durations are permissible: - 100 A unlimited - 120 A for 1 minute - 140 A for 20 seconds (However, depending on the plug system, the limits of the plugs are significantly lower!) Useful values are with - MPX green (double contact) and XT60 continuous: 50 A \/ 20A\u003c\/li\u003e\n\t\u003cli\u003evoltage measuring range: 0 to 60V\u003c\/li\u003e\n\t\u003cli\u003ealtitude measuring range: 0 to 8000 m above sea level, automatically reset to zero when switched on\u003c\/li\u003e\n\t\u003cli\u003ereceiver voltage measurement: 3.8 to 10V\u003c\/li\u003e\n\t\u003cli\u003edata rate: 10Hz\u003c\/li\u003e\n\t\u003cli\u003epower supply from receiver power supply via the telemetry connection (from 3.8V to a maximum of 10V)\u003c\/li\u003e\n\t\u003cli\u003ecurrent consumption: approx. 25mA\u003c\/li\u003e\n\t\u003cli\u003eexternal connections: 1 connection for telemetry and power supply 1 phase connection for brushless speed measurement 1 servo pulse input from receiver COM connection for UniDisplay, GPS logger or PC\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eDimensions: \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003egreen MPX connector: 26 (38) x 29 x 9 mm\u003c\/li\u003e\n\t\u003cli\u003eyellow XT60 connector: 26 (50) x 29 x 9 mm\u003c\/li\u003e\n\t\u003cli\u003e4 mm gold connector: 26 (55) x 22 x 9 mm 5.5 mm gold connector: 26 (44) x 22 x 11 mm\u003c\/li\u003e\n\t\u003cli\u003e6 mm LMT gold connector: 26 (42) x 22 x 11 mm\u003c\/li\u003e\n\t\u003cli\u003eweight: 10 -14g without cable (depending on plug system), connection cable 4g\u003c\/li\u003e\n\t\u003cli\u003escope of delivery: UniSens-E with integrated altitude sensor, variometer connection cable to the receiver for telemetry\/power supply, connection cable for brushless speed measurement, detailed color operating manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e","brand":"SM-Modellbau","offers":[{"title":"Default Title","offer_id":53448679850327,"sku":"SM3100","price":65.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/8318\/0119\/files\/SM3100_b1_86416eeb-76c9-42bf-a56d-6e656104115e.jpg?v=1779817789","url":"https:\/\/hoelleinshop.com\/en\/products\/unisens-e-mit-mpx-steckverbindung-grun-sm-modellbau-3100","provider":"hoelleinshop","version":"1.0","type":"link"}