Amewi Eagle Twin V2, 40mm EDF PNP Flying Wing, GREEN, # 24141

The Eagle Twin V2 40mm EDF flying wing features a newly developed 40mm EDF drive system at both wingtips and a large battery compartment in the center of the fuselage. Powered by a 4S Lipo battery, the factory-installed 40mm EDF impellers give the aircraft a power-to-weight ratio of more than 1:1.5, allowing for effortless hand launches and a very high top speed of up to 180km/h. Thanks to its high maneuverability, built-in gyro, and excellent slow-flight characteristics, the model can be flown on almost any model airfield or on larger meadows. Due to the wear-resistant plastic parts under the fuselage and wingtips, landings on rougher surfaces are also not a problem. With a streamlined, aerodynamic profile, a special EDF configuration, and a setup supported by the built-in gyro, the Eagle Twin V2 is capable of performing flat spins, inverted flat spins, loops, and other challenging maneuvers – all at a fantastic top speed. The entire structure of the model, with high-strength foam, carbon inserts, and reinforcements, is designed for maximum performance. Fully pre-assembled and ready to fly: If you are looking for a hand-launched delta model with a completely new drive concept, then the Amewi Eagle Twin V2 is exactly what you need.

Highlights:

• Built-in adjustable gyro (optional use): For maximum performance and directional stability
• High-strength airframe made of special foam: In combination with carbon inserts and reinforcements, gives the model excellent flight characteristics
• Two externally mounted 40mm 12-blade impellers: Additionally with authentic sound and a thrust-to-weight ratio of 1:1.5 – more thrust than weight = maximum fun factor

Further features:

• PNP variant: Model almost ready to fly out of the box
• Two Hobbywing ESCs pre-installed
• Two digital metal gear servos pre-installed
• Highly visible colors and a wingspan of 1019mm
• Extreme top speed of 180km/h possible
• Very good slow flight characteristics thanks to the chosen delta profile
• Model designed in a simulated wind tunnel
• Large battery compartment for a 4S 1800-2200mAh min. 30C LiPo battery with XT60 connectors.

Technical data:
Wingspan: 1019mm
Overall length: 383mm
Flying weight: 650g
Motor: 2x brushless 1413 5000KV
ESC: 2x 20A Hobbywing
Servo: 2x 9g Digital MG
EDF: 2x 40mm 12-blade
Center of gravity: 162mm from the leading edge of the wing
Wing loading: 35g/dm²
Wing area: 19.5dm²
Recommended battery: LiPo 4S 2200 - 2600mAh min. 30C
Battery dimensions: approx. 210x40x40mm
Flight time: 5-10min
Requirement: Advanced, Professional

Scope of delivery: 

• Model fully assembled 
• Instruction manual in English

Required accessories:

• Transmitter: recommended min. 5-channel computer transmitter with delta program (mixer), expo and dual rate programming options
• Battery 4S LiPo 2200 – 2600mAh min. 30C XT60 connector (approx. 210x40x40mm)
• Suitable charger for the selected LiPo battery