Beta 1400 KIT Version, Wingspan 1400mm, Beginner Model

BETA 1400 is constructed from highly resistant, extruded polyolefin foam (EPO) and is powered by a brushless motor. Thanks to the motor being placed on the pylon behind the wing, the model withstands rough handling very well and can tolerate nose-dives that would damage the propeller on classic models with the motor in the nose of the fuselage.

The fuselage with the pylon behind the wing is prepared for mounting a brushless outrunner motor. The fuselage is made of EPO foam. The Bowden cables with wire linkages for controlling the rudder and elevator are already glued in. The servo slots are prepared. The canopy is removable with a magnetic latch. The two-part wing is also made of EPO foam. The ailerons are controlled by 2 servos, which are actuated in the wing by short, direct wire linkages.
The wing halves are connected with a carbon fiber tube connector and secured with a screw on the underside of the wing. The tailplane in the classic arrangement is also made of EPO foam and is controlled by Bowden cables. The motor is cooled by the airflow that flows through the pylon and motor openings. Ailerons, rudder, elevator, and motor speed are controlled.

To control the model, you need at least a 4-channel RC set. In this case, both aileron servos are connected to one channel with a Y-cable.
When connecting the receiver, follow the operating instructions of your RC set. It is ideal to use at least a 5-channel computer RC set. This allows aileron servos to be controlled independently. In this case, you can adjust the aileron differential. For beginners, we recommend 50% - i.e., the downward deflection of the aileron is limited to 50% of the upward deflection.
To facilitate landing, it is advantageous to mix the ailerons as aerodynamic brakes (tilt them upwards). You will appreciate this on smaller landing areas and especially when flying on slopes.
When setting the aerodynamic brakes, make sure that when the ailerons are fully deflected upwards in the braking function, their full upward deflection in the aileron function is also maintained.

BETA 1400 is suitable for flight beginners - we always recommend making the first flights under the supervision of an experienced pilot to enjoy a relaxing time model flying.
The flight characteristics are pleasant. The model will familiarize you with controlling all three axes as well as with proper coordinated control with rudder, elevator, and ailerons. This experience is useful when you start flying with your first aerobatic model or semi-/scale model.
By changing the length ratios of the servo and control horns, you can adjust the control surface throws. Beginners start with small deflections. Experienced pilots set large deflections, which also allow for some aerobatics - BETA handles loops, barrel rolls, and turns quite well!
BETA 1400 can also utilize weak thermals and stay in the sky for a very long time.

The quick-build kit includes:

• a fuselage, wings, and tailplane made of EPO
• a carbon fiber tube connector for the wing
• a folding propeller 7x6"
• a small parts accessory set
• 2 decal sheets (one for the red and the other for the blue version)
• detailed building and flight instructions