Brushless ESC YGE 265 Aureus HVT, 15/30A @ 5.5-12V BEC, Telemetry

The -T- in the designation of the YGE-265 Aureus HVT BEC stands for telemetry. The following protocols are currently supported:

• Mikado VBar
• Graupner HoTT V4
• Jeti ExBUS
• Multiplex Sensor BUS V2
• Proprietary YGE protocol for further telemetry connections via, for example, S32 (new Jlog from R² Prototyping). Further protocols are in preparation.

With the optionally available USB adapter, the 265 Aureus HVT-BEC can be extensively configured and updated with new firmware. During operation, the PWM frequency is automatically adjusted to the motor's requirements, always ensuring optimal performance. Thanks to the new sinusoidal start-up of the 265 Aureus HVT, the start-up behavior is now SUPER SMOOTH.

The built-in BEC is adjustable between 5.5V and 12V and delivers a remarkable 15 / 30 Amperes of current.

Description:

• The stated current is the maximum continuous full-throttle current with good cooling.
• 6 to 14S LiPo, power reduction or shutdown on undervoltage.       
• BEC 5.5-12V and 15A continuous / 30A Peak - Undervoltage detection can be switched off.
• Current limiting
• Undervoltage detection can be switched off
• Speed control (Governor Mode).
• Soft start (up to 60 sec. for scale helicopters)
• Active freewheeling, making it infinitely partial load resistant.
• Automatic timing, or adjustable in 6 steps.
• EMF brake adjustable.
• F3A / Acro brake (braking strength continuously adjustable during flight).
• Min. and Max. values are logged and can be displayed in the optional PC tool after the flight (e.g., current)
• Speed limit: 240,000 rpm (2-pole)
• Overtemperature / overload warning
• Anti-spark: Reduces the power-on spark.
• Basic programming via mode setup.
• Fine tuning and selection of the telemetry protocol via PC setup, suitable USB adapter is optionally available.  

Scope of delivery:

• Speed controller Aureus 265 HVT-BEC       
• Rubber buffers
• Fan with connection cable and protective grille