Single Transmitter mz-18HoTT, 9-channel
D-Power # S1005.77

The Graupner mz-18 remote control is the perfect transmitter for almost all model aircraft. The transmitter is particularly suitable for advanced RC pilots. The proven Graupner 2.4 GHz HoTT technology
guarantees interference-free and delay-free transmission, even over long distances.
The Graupner mz-18 features a 3.5'' TFT color touch display. Received telemetry data can thus be clearly read and programming can be done directly on the transmitter.
As an additional safety feature, the mz-18 has intelligent voice output - via loudspeaker or headphones. This provides telemetry data, warnings, alarms and vario signals.
The mz-18 can store up to 30 models internally. If more models or telemetry data are to be stored, the mz-18 has a micro SD card slot. The memory can thus be easily expanded.
Models, telemetry data and updates are simply transferred via the included USB cable.
All firmware and software updates can be found on the Graupner website under "Service/Updates".

Product features:

• HoTT bi-directional 2.4GHz technology with 75 frequency hops
• 9 channels 3.5'' TFT color touch display
• Intelligent voice output via loudspeaker or headphones
• Real-time telemetry data transmission
• Binding of multiple receivers possible
• Ball bearing stick units (total of 8 ball bearings)
• Micro-SD card slot for model memory expansion and telemetry data recording
• 30 internal model memories
• Model copy function
• Updatable via USB
• Model type: Helicopter, aircraft (normal or delta), glider
• Numerous servo settings (travel, limit, reverse, center position)
• Dual Rate and Expo, separately adjustable for each flight phase
• 6 flight phases
• Helicopter type: 1 servo, 2 servo 180°, 3 servo 120° (2 pitch or 2 roll), 3 servo 140°, 4 servo 90°
• Pitch curves (7 points) separately adjustable for each flight phase
• Throttle curves (7 points) separately adjustable for each flight phase
• Phase trims for pitch and throttle swashplate limiter function
• Swashplate mixing function 5 linear mixers 3 curve mixers
• Numerous aircraft types from 1QR to 4-flap surfaces Elevator: 1 EL, 2 EL, V-tail Snaproll function Aileron differential, separately adjustable for each flight phase
• Butterfly function

Maximum safety:

• Extremely long range
• FHSS, frequency hopping over up to 75 channels
• Maximum interference immunity through optimized frequency hopping, wide channel spreading and antenna diversity
• Intelligent data transmission with correction function
• Range test and warning function
• Undervoltage warning
• Numerous fail-safe functions
• Key-Lock function against unintentional adjustment of menus

Highest precision:

• Shorter reaction times adjustable (10ms period time)
• No additional delays due to module processors. The entire hopping management is carried out directly by the 32-bit main processor.
• Synchronous servo operation possible by simultaneous control of the servo outputs in blocks of 4

Scope of delivery:

• mz-18 HoTT transmitter
• 4000mAh LiPo transmitter battery
• Transmitter charger
• USB cable
• USB PC Interface Adapter
• USB adapter cable
• Transmitter strap

Technical data:

• Control functions: 9
• Dimensions [LxWxH in mm]: 194 x 287 x 112 mm
• Modulation: FHSS
• Current consumption [mA]: 510 mA
• Operating voltage [V]: 3.4 - 4.8 V
• Temperature range [°C]: -10 - +55 °C
• Total weight [g]: 940 g
• Frequency: 2400 - 2483.5 MHz
• Range approx. [m]: 4000 m