Epoxy Resin HT 2 + Hardener HT 2 (1000 g), R&G # 105100-1

Potential Hazards - Epoxy Resin HT 2

Hazard-determining component for labelling

2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)] bisoxirane
Reaction mass of 2,2'-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and [2-({2-[4- (oxiran-2-ylmethoxy)benzyl]phenoxy}methyl)oxirane and [2,2'-[methylenebis(2,1-phenyleneoxymethylene)]dioxirane reaction products of hexane-1,6-diol with 2-(chloromethyl)oxirane (1:2)

Signal word: Attention

Pictograms:

Safety information GHS / H-phrases

H315  Causes skin irritation.
H317  May cause an allergic skin reaction.
H319  Causes serious eye irritation.
H411  Toxic to aquatic life with long lasting effects.

Safety information GHS / P-phrases

P261  Avoid breathing dust / fume / gas / mist / vapours / spray.
P273  Avoid release to the environment.
P280  Wear protective gloves / protective clothing / eye protection / face protection.
P305  P351 P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333  P313 If skin irritation or rash occurs: Get medical advice / attention.
P501  Dispose of contents / container in accordance with local regulations.

Safety information GHS / EUH phrases

EUH205  Contains epoxy constituents. May produce an allergic reaction.

Potential Hazards - Hardener HT 2

Hazard-determining component for labelling

3-Aminomethyl-3,5,5-trimethyl-cyclohexylamine
Benzyl alcohol
Cyclohexanemethanamine, 5-amino-1,3,3-trimethyl-, reaction products with bisphenol-A-diglycidyl ether
Homopolymer
Reaction mass of (1-phenylethyl)phenols and bis-(1-phenylethyl)phenols

Signal word: Danger

Pictograms:

Safety information GHS / H-phrases 

H302  Harmful if swallowed.
H314  Causes severe skin burns and eye damage.
H317  May cause an allergic skin reaction.
H412  Harmful to aquatic life with long lasting effects.

Safety information GHS / P-phrases 

P260  Do not breathe dust / fume / gas / mist / vapours / spray.
P303  P361 P353  IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305  P351 P338  IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310  Immediately call a POISON CENTER / doctor.
P362 P364  Take off contaminated clothing and wash it before reuse.
P405  Store locked up.

Epoxy Resin HT 2 + Hardener HT 2 (45 minutes), 1000g Working Pack

Very low-viscosity, solvent- and filler-free, transparent laminating and coating system with a tack-free, glossy surface.

• Highly transparent, very light, max. slightly reddish in a thicker layer
• Largely UV-stable
• Tack-free curing of thinnest layers
• Also for pouring in layer thicknesses up to 5 mm in one go
• Nonylphenol-free

The Epoxy Resin HT 2 is suitable for impregnating glass, aramid and carbon fibres* and for bonding wood, metal, styrofoam, etc.

*Due to the low surface tension, the system shows good filler absorption. Reinforcement fibres such as glass, aramid and carbon are wetted very well.

Epoxy Resin HT 2 is a laminating resin based on Bisphenol A/F. Bisphenol F reduces the viscosity and prevents the resin from crystallising at low temperatures (below + 5 °C).

Epoxy Resin HT 2 is difunctional reactive diluted, solvent- and filler-free.

The system is highly transparent and, with finished glass fabrics (Finish FK 144/FK 800), yields highly transparent laminates with good lightfastness.

Processing time: 45 minutes

Mixing ratio:
100 : 48 parts by weight resin : hardener
100 : 55 parts by volume resin : hardener

Curing time: 24 hours
Cold curing