Epoxy Resin L with Hardener GL 2, 715g Resin L + 215g Hardener GL 2, RG # 1041001-AP
As of April 2026 · Prices incl. VAT unless stated otherwise.
-
Delivery time on request.
-
Free shipping on orders over 129 EUR (within Germany, excluding product-dependent surcharges!)
Epoxy Resin L with Hardener GL 2, 715g Resin L + 215g Hardener GL 2, RG # 1041001-AP
Possible Hazards - Epoxy Resin L
Hazard-determining component for labeling
2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane
Hexanediol diglycidyl ether
Bisphenol F epichlorohydrin resin
Signal word: Warning
Pictograms:
Safety Instructions GHS / H-phrases
| H315 | Causes skin irritation. |
| H317 | May cause an allergic skin reaction. |
| H319 | Causes serious eye irritation. |
| H411 | Toxic to aquatic life with long lasting effects. |
Safety Instructions GHS / P-phrases
| P261 | Avoid breathing dust/fume/gas/mist/vapours/spray. |
| P273 | Avoid release to the environment. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P305 P351 P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| P333 P313 | If skin irritation or rash occurs: Get medical advice/attention. |
| P501 | Dispose of contents/container in accordance with local regulations. |
Safety Instructions GHS / EUH-phrases
| EUH205 | Contains epoxy constituents. May produce an allergic reaction. |
Possible Hazards - Hardener GL 2
Hazard-determining component for labeling
3-aminomethyl-3,5,5-trimethylcyclohexylamine
Polyoxypropylenediamine
3-aminopropyltriethoxysilane
Signal word: Danger
Pictograms:
Safety Instructions GHS / H-phrases
| Safety Instructions GHS | H-phrases |
|---|---|
| H314 | Causes severe skin burns and eye damage. |
| H317 | May cause an allergic skin reaction. |
| H412 | Harmful to aquatic life with long lasting effects. |
Safety Instructions GHS / P-phrases
| Safety Instructions GHS | P-phrases |
|---|---|
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P103 | Read label before use. |
| P303 P361 P353 | IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. |
| P305 P354 P338 | IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| P310 | Immediately call a POISON CENTER/doctor. |
| P362 P364 | Take off contaminated clothing and wash it before reuse. |
| P405 | Store locked up. |
| P501 | Dispose of contents/container in accordance with local regulations. |
Epoxy Resin L + Hardener GL 2 (210 min), 930g Working Pack
Approved by Germanischer Lloyd for the construction of boats and rotor blades for wind turbines.
Properties:
- Extremely low viscosity (mixing viscosity 250 mPas at 25 °C)
- Highly transparent (Gardner color index < 1)
- Curing possible from 15 °C
- Glass transition temperature (Tg) > 85 °C (with warm curing 70 °C / 15 h)
- No brittleness with pure cold curing (at 20 °C)
- High static and dynamic strength
Mixing ratio:
100 : 30 parts by weight Epoxy Resin L : Hardener GL 2
100 : 35 parts by volume Epoxy Resin L : Hardener GL 2
Processing time: approx. 210 minutes*
- Measured with Gelnorm®-Geltimer: 100 g at 20 °C = approx. 210 minutes processing time)
(Temperature increase in the cup from 23 °C to 40 °C with 100 ml approx. 109 minutes).
Suitable for the following processing methods:
- Vacuum infusion (RI)
- RTM (resin transfer moulding)
- Wet pressing
- Vacuum pressing
- Filament winding
- Hand laminating
Due to its Bisphenol A/F basis, the resin component is absolutely crystallization-free. The resin system is cold-curing and does not develop pronounced brittleness even at curing temperatures below 20 °C. However, to improve the mechanical and physical properties, warm curing at at least 40 °C for 15 h is recommended.
Why Der Himmlische Höllein?
An excerpt from our FAQ
How long is the processing time?
The processing time for orders where all items are in stock is a maximum of 24 hours. If products are missing from your order, we will immediately send you an order confirmation with a delivery date for the missing items.
Do you also ship internationally?
Of course, we also ship internationally. You can find more information under Shipping Methods.
How can I return it?
You can return purchased items within the statutory withdrawal period. You can find more information on this in the Widerrufsbelehrung (right of withdrawal policy).
