Epoxy Resin L with Hardener LT, 250g, R&G # 100130-0
As of April 2026 · Prices incl. VAT unless stated otherwise.
-
Delivery time Germany: 1-3 business days.
-
Free shipping on orders over 129 EUR (within Germany, excluding product-dependent surcharges!)
Epoxy Resin L with Hardener LT, 250g, R&G # 100130-0
Potential Hazards - Epoxy Resin L
Hazard-determining component for labelling
2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylen)] bisoxirane
Hexanediol diglycidyl ether
Bisphenol-F-epichlorohydrin resin
Signal word: Warning
Pictograms:
Safety instructions GHS / H-phrases
| H315 | Causes skin irritation. |
| H317 | May cause an allergic skin reaction. |
| H319 | Causes serious eye irritation. |
| H411 | Toxic to aquatic life with long lasting effects. |
Safety instructions GHS / P-phrases
| P261 | Avoid breathing dust / fume / gas / mist / vapours / spray. |
| P273 | Avoid release to the environment. |
| P280 | Wear protective gloves / protective clothing / eye protection / face protection. |
| P305 P351 P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| P333 P313 | If skin irritation or rash occurs: Get medical advice / attention. |
| P501 | Dispose of contents / container in accordance with local regulations. |
Safety instructions GHS / EUH-phrases
| EUH205 | Contains epoxy constituents. May produce an allergic reaction. |
Potential Hazards - Hardener LT (90 min)
Hazard-determining component for labelling
3-Aminomethyl-3,5,5-trimethylcyclohexylamine
Isophoronediamine
Reaction product of propane-1,2-diol, propoxylated by amination of the terminal hydroxyl group
3,6-Diazaoctanethylenediamine
Triethylenetetramine
Signal word: Danger
Pictograms:
Safety instructions GHS / H-phrases
| H302 | Harmful if swallowed. |
| H312 | Harmful in contact with skin. |
| H314 | Causes severe skin burns and eye damage. |
| H317 | May cause an allergic skin reaction. |
| H318 | Causes serious eye damage. |
| H412 | Harmful to aquatic life with long lasting effects. |
Safety instructions GHS / P-phrases
| P260 | Do not breathe dust / fume / gas / mist / vapours / spray. |
| P303 P361 P353 | IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water / shower. |
| P305 P351 P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| P310 | Immediately call a POISON CENTER / doctor. |
| P405 | Store locked up. |
| P501 | Dispose of contents / container in accordance with local regulations. |
Epoxy Resin L + Hardener LT (90 min), 250g working pack
- DETA-free
- Low viscosity, solvent-free and filler-free
- Fast impregnation of glass, aramid and carbon fibres
- Tack-free curing even of the thinnest layers (after hot curing)
- High static and dynamic strength*
- Improved milling edge quality
- Increased heat deflection temperature after hot curing
*Higher stiffness (+ approx. 17 %), tendentially higher strength
The system Epoxy Resin L + Hardener LT can be processed using all common methods such as hand laminating, pressure and vacuum impregnation, as well as pressing and winding. Due to its low surface tension and low curing shrinkage, it is also very suitable for bonding wood, metal, and rigid PS foams such as Styropor® / Styrodur®, etc.
Epoxy Resin L with Hardener LT exhibits excellent mechanical properties, as required, for example, in aircraft construction. However, it does not have aerospace approval.
Processing time: 90 minutes (100 g / 20 °C)
Mixing ratio:
100 : 25 parts by weight Epoxy Resin L : Hardener LT
100 : 29 parts by volume Epoxy Resin L : Hardener LT
Curing time:
16-24 h at room temperature, then 16 h at 70 °C
Tempering is absolutely necessary, otherwise the degree of cross-linking will be too low, resulting in brittleness.
Furthermore, the relative humidity during processing and curing should be below 50%; the lower, the better.
Glass transition temperature (Tg)*:
Untempered after 7 days at 23 °C: approx. 52-53 °C
Tempered at 130 °C for 3 h: approx. 102-103 °C
Why Der Himmlische Höllein?
An excerpt from our FAQ
How long is the processing time?
The processing time for orders where all items are in stock is a maximum of 24 hours. If products are missing from your order, we will immediately send you an order confirmation with a delivery date for the missing items.
Do you also ship internationally?
Of course, we also ship internationally. You can find more information under Shipping Methods.
How can I return it?
You can return purchased items within the statutory withdrawal period. You can find more information on this in the Widerrufsbelehrung (right of withdrawal policy).
