Flying Bulls EC135 PRO brushless, 352mm HELICOPTER RTF (Transmitter, LiPo, Charger)

The original EC-135 of the "Flying Bulls" was built in 2006 and bears the registration OE-XFB. The helicopter has a length of about ten meters and is powered by two Turbomeca turbines with a system output of 2 x 643hp. The maximum speed is approx. 290km/h with a service ceiling of 6,100m. The EC-135 is approved for up to six people (one pilot, five passengers).

This EC-135 is a licensed Super Scale replica in 1:32 scale with the original Flying Bulls livery. The model is therefore in no way inferior to the original – even the individual rivets of the cabin, which is made of solid plastic, are depicted. This helicopter has LED lighting at the front, bottom and rear, which not only rounds off the captivating appearance and enables flying at dusk, but also informs about the respective flight status and the voltage of the flight battery: If the LED, for example, starts to flash and turns red, the voltage is too low. This way, the pilot immediately knows that he should better return to recharge. The special feature of the battery: a USB charging socket is built in, which is simply connected to the included USB cable. The flight time with a full battery is about 8-10 minutes.

Thanks to high-quality electronics including auto-start and auto-landing, the flight characteristics are gentle and the heli is suitable for beginners despite its multi-blade rotor head. The ergonomic 2.4GHz transmitter fits well in the hand and offers the option of pre-selecting different flight phases (from beginner to advanced), ergonomic transmitter sticks and the option of switching from Mode 2 (delivery state) to Mode 1. In addition, the EC-135 offers the option of switching to inverted flight at the push of a button from a safe altitude of about nine meters. For sufficient power during such flight maneuvers, the Super Scale helicopter is equipped with two high-performance brushless motors (main rotor and tail rotor). Further features include automatic altitude hold by various optical and electronic sensors.

The model is delivered as an RTF (Ready-to-Fly) version, i.e. all components – except for household batteries for the remote control – are already included in the package and the heli can be started immediately after charging the battery.

Highlights:

• Super Scale optics: The Flying Bulls licensed model
• Flight maneuvers like professional pilots: Automatic, stabilized inverted flight possible at the push of a button
• Plenty of power reserves in every situation: Thanks to 4-blade rotor head like the original incl. powerful
• Double brushless drive (front/rear)

Further features:

• Auto-start and auto-landing at the push of a button
• Sensors (optical and electronic) for a quiet, stabilized flight
• Detailed fuselage with many scale attachments like the original
• Swashplate made of aluminum
• Blade holders, mixer arms and linkages made of high-strength composite material
• Intelligent 1200mAh 7.4V LiPo battery incl. charging socket, LiPo checker and 5V output for
• additional optional attachments such as camera or landing lights
• High-quality transmitter with many functions and ergonomic shape (gamepad for easy handling even for inexperienced pilots
• Switching from Mode-2 (throttle left) to Mode-1 (throttle right) possible
• Gyro calibration in every mode via the transmitter for even more stable hovering flight
• Automatic altitude hold via electronics and sensors
• Option to pre-select different flight phases from beginner to advanced (suitable for indoor and outdoor use in light wind)

Technical data:

Scale: 1:32
Fuselage length: 352mm
Fuselage height: 120mm
Rotor diameter: 330mm
Tail rotor diameter: 70mm
Main motor: 2507 Brushless
Tail motor: 1204 Brushless
Main material: High-strength plastic
Ready-to-fly weight: 283g
Servos: 3 Micro servos / swashplate
Remote control: 2.4GHz, 6-channel, Mode 2 and Mode 1
Range: approx. 50-80m
Battery: LiPo 2S 7.4V 1200mAh, hardcase with integrated plug and USB port for charging, 75x35x28mm, 79g; with built-in on/off switch and 5V output for e.g. additional camera or landing lights
Flight time: 8-10min
Charger: USB cable
Charging time: approx. 60-90min

Scope of delivery:

• Model
• Remote control
• LiPo battery
• USB charging cable
• Spare rotor blades
• Instruction manual DE/EN

Required accessories:
4x 1.5V AA Mignon batteries for the remote control