FMS YAK 130, V2, PNP, EDF-Jet with 70mm Impeller, Spw. 880mm
D-Power # FMS180P

Impressive Performance Jet in a handy size – V2 now with improved metal landing gear

Finding the balance between scale and performance has always been a challenge in model aviation. To achieve ideal flight characteristics, numerous prototypes, test flights and modifications are required to bring the model into its final form.
FMS has succeeded in doing just that with the Yak-130 – and with the V2, is now launching an even better version of the jet.

Authentic Replica:
The Yak-130 V2 from FMS with an 88cm wingspan is a replica of the twin-engine training jet from Yakovlev and is in no way inferior to its Russian original. Many true-to-original details and a faithful flight pattern make this jet a convincing scale model.

Now even better!
After numerous tests, aerodynamic optimizations were made to the model. In addition, the metal retractable landing gear was reinforced and some new scale details were added, making the model even more true-to-original than its predecessor.
In addition, the type of assembly has been optimized.

Powerful Drive:
The Yak-130 V2 is powered by a 6S LiPo with a powerful 28 brushless inrunner and a 70mm impeller unit, which provides gigantic thrust. The drive is controlled by a Predator 80A flight controller. With the recommended 6S 2600 to 3200mAh battery, flight times of about 4 to 6 minutes are achieved.

Precise Control:
Eight 9g digital servos with metal gears are pre-installed in the model. With their high torque, the servos ensure precise control and strong performance even during the most demanding flight maneuvers.

Take off and land like the original:
The electric retractable metal landing gear not only provides an original look during take-offs and landings but also ensures safe landings on hard and grass runways due to its robustness. Rough landings are absorbed by the landing gear. The functional landing flaps also provide a low approach speed.

Extremely short assembly time:
The Yak-130 V2 from FMS comes almost ready to fly out of the box. All electronics are pre-installed and wired in the model. Only the remote control system and a 6S LiPo pack are required. The jet is ready for its maiden flight in about 20 to 30 minutes.

Features:

• Lightweight hard foam construction made of robust EPO material
• Powerful 2860-KV1850 brushless inrunner with Predator 70A flight controller installed
• Effective 70mm impeller with 12 blades installed
• Eight 9g digital servos with metal gears installed
• Improved detailed metal retractable landing gear
• Functional landing flaps
• Many true-to-original scale details
• Detailed cockpit and painted pilot figure
• True-to-original paint finish with environmentally friendly water-based paint
• Illustrated instructions in German and English

Required Accessories:

• Transmitter and receiver with at least 6 channels
• 6S 22.2V 2600-3300mAh LiPo battery
• LiPo charger