Formula Five® Mold Release Paste, Silicone-containing, 340g, R&G # 1651251

Possible hazards - FORMULA FIVE® Release Paste, 340 g

Hazard-determining component for labeling

Hydrocarbons, C11-C14, n-alkanes, isoalkanes, cyclics, <2% aromatics

Signal word: Danger

Pictograms:

GHS Safety Instructions / H-Statements 

H304 May be fatal if swallowed and enters airways.

GHS Safety Instructions / P-Statements 

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.
P301 P310 IF SWALLOWED: Immediately call a POISON CENTER / doctor.
P331 Do NOT induce vomiting.
P405 Store locked up.
P501 Dispose of contents / container in accordance with local regulations.

FORMULA FIVE® Release Paste, 340 g

FORMULA FIVE® Release Paste is a wax-based blend developed for high-gloss surfaces and excellent scrub resistance.

• Contains silicone
• Resistant up to approx. 100 °C
• Very good release effect

Carnauba hard wax with modern synthetic waxes. Produces high-gloss surfaces. Drying time before polishing approx. 10-12 minutes.

Manufacturer's processing instructions:
Rub the wax thoroughly onto the cleaned mold surface. Leave the wax in the mold until it is moderately dry (wax appears cloudy). Polish with a clean cloth, we recommend our cleaning and polishing cloth (item no. 365-SHT), until a clear high gloss is achieved. Wipe the entire mold surface with the cleaning cloth. Note: Use 2 to 3 layers of wax for the first application. Wax and polish as needed.

Consumption: 20-60 g/m² (amount depends on the condition of the mold surface)

Important note on substrates:
This product contains hydrocarbon-based solvents (see under Additional Information --> Safety Data Sheet). A small proportion (< 2%) of aromatic hydrocarbons is also included. Some plastic surfaces (e.g., polycarbonate, Plexiglas®, various paints, putties) are dissolved by this, so that molding is not possible. This must be checked before use, either using material resistance lists or by a preliminary test.