Hobbywing Skywalker Brushless ESC 80A V2, 3-6S LiPo, 7A SBEC, # HW80060440

The Skywalker 80A V2 series is the perfect choice for equipping ARF or RTF models with an easy-to-program ESC and best possible performance. These ESCs are designed exclusively for controlling brushless motors. LiPo, NiCd, or NiMH batteries can be used, and the cell count is automatically detected.

Thanks to the use of high-quality SMD components, the internal resistance of the ESCs is particularly low. Due to the high clock frequency, the Skywalker V2 ESCs offer high-resolution and sensitive control behavior. All ESCs feature temperature and overcurrent protection. And of course, the entire series is equipped with an effective start-up protection system in case the throttle stick on the transmitter is not in the neutral position when powered on.

With the LED program card (not included) the following parameters can be set on the ESC:

• Brake on / off
• Battery type (LiPo / NiMH / NiCd)
• Cutoff mode (soft / full off)
• Cutoff voltage for LiPo (2.85V / 3.15V / 3.3V)
• Cutoff voltage for NiMH/NiCd (off / 50% / 65%)
• Start mode (normal / soft / ultra slow)
• Timing (3.75° / 15° / 26.25°)

Overall, the Skywalker V2 series stands out for its simple handling and high reliability in practice. The high-quality flexible silicone cables emphasize the high quality.

Features:

• Particularly low internal resistance
• High PWM frequency
• Dynamic brake for folding propellers
• Temperature protection
• Overcurrent protection
• Start-up safety system with anti-start protection
• Easy programming via program card
• Soft start with low torque to protect the gearbox
• Motor cut-off in case of missing transmitter signal or radio interference
• High-quality silicone connection cables
• High reliability