Infinity 250 V2, Electric Glider in Full-GFRP, 2500 mm, ARF+
D-Power # IFT250XV2

The INFINITY 250 V2 by D-POWER is a fully resilient all-rounder in high-quality full-GFRP construction with a full-flying stabilizer and functional flaps. Whether aerobatic maneuvers at full throttle or soaring in thermals and on the slope – the flight characteristics of the INFINITY 250 leave nothing to be desired.

High-quality construction:
The electric glider model is entirely made using GFRP shell construction. All components are already elaborately painted in the mold and pre-fabricated for minimal assembly effort.

• entirely made in high-quality GFRP shell construction
• full-flying stabilizer
• modified RG-14 airfoil
• GFRP fuselage, tail units, and GFRP wings painted in the mold
• good visibility due to high-contrast block stripes on the underside of the wings
• CFRP reinforcements in fuselage and wings
• solid carbon fiber wing connector
• short construction time thanks to high degree of prefabrication > ARF+

Ample space for electronics:
The fuselage of the INFINITY 250 is specifically designed for electric propulsion. The integrated CNC-milled battery board offers sufficient space for large batteries and the necessary electronics. The glued-in GFRP motor bulkhead also provides space for 35mm inrunner or outrunner motors.

• laser-cut battery board pre-installed in the fuselage
• fuselage canopy offers space for 4S 4000mAh batteries
• glued-in GFRP motor bulkhead
• pre-installed servo frames
• wiring harness already laid in the wing

ARF+ means an extremely high degree of prefabrication:

With the ARF+ equipment, you have the option to outfit your electric glider according to your preferences. All wiring is completely pre-installed, so you only need to connect your electronic components to the pre-routed wiring harness and plug the cables in the fuselage into the receiver. Spend minimal time in the workshop – and maximum time at the airfield.

• wiring harness pre-installed and integrated
• MULTIlock® wing locking system installed
• MPX high-current connectors installed in fuselage and wing parts
• pre-installed servo frames
• pre-threaded linkages, all control linkages pre-installed
• control horns already installed
• spinner included
• richly illustrated, German-language assembly instructions

Required accessories:

• Motor: D-Power AL35-08
• Controller: D-Power Comet 60A
• Battery: 4S LiPo 3700mAh – 4000mAh
• Propeller: 11x7“ (4S)
• Rudder servos: 1x D-Power DS-340BBMG
• Elevator servos: 1x D-Power DS-340BBMG
• Aileron servos: 2x D-Power DS-840BBMG
• Flap servos: 2x D-Power DS-840BBMG
• Remote control system: at least 8 channels