Infinity 300, Full GRP Electric Glider, Wingspan 2990mm, ARF+
D-Power # IFT300X

Following the great success of the INFINITY 250 electric glider, the slightly larger brother INFINITY 300 is now here, with almost 50cm more wingspan and a new, elegant color design.

Like its smaller brother, the INFINITY 300 from D-POWER is a fully loadable all-rounder with high-quality full GRP construction, a flying stabilizer, and functional flaps. Whether it's aerobatics at full throttle or gliding in thermals and on slopes - the INFINITY 300's flight characteristics leave nothing to be desired.

High-quality construction:
The electric glider model is entirely made using GRP shell construction. All components are already elaborately painted in the mold and pre-fabricated for minimal assembly effort.

• Fully GRP shell constructed flying stabilizer of high quality
• Modified RG-14 wing profile
• In-mold painted GRP fuselage, tailplanes, and GRP wings
• Good visibility thanks to contrasting block stripes on the underside of the wings
• CFRP reinforcements in fuselage and wings
• Solid carbon fiber wing connector
• Short construction time thanks to high degree of pre-fabrication > ARF+

Plenty of space for electronics:

The INFINITY 300's fuselage is specifically designed for electric propulsion. The built-in CNC milled battery board offers ample space for large batteries and the necessary electronics. The glued-in GRP motor bulkhead also provides space for 42mm inrunner or outrunner motors.

• Laser-cut battery board pre-installed in the fuselage
• Fuselage canopy offers space for 3S or 4S 4000mAh batteries
• Glued-in GRP motor bulkhead
• Pre-installed servo frames
• Wiring harness already fully installed

ARF+ means an extremely high degree of pre-fabrication:

At D-Power, it was a conscious decision not to offer this model with an installed motor and servos. With the ARF+ equipment, you have the option to equip your electric glider according to your preferences. All cable harnesses are fully laid out, so you only need to connect your electronic components to the pre-routed wiring harness and plug the cables into the receiver in the fuselage. Spend minimal time in the hobby room – and maximum time at the airfield.

• Wiring harness pre-installed and integrated
• MULTIlock® wing locking system installed
• MPX high-current connectors installed in fuselage and wing sections
• Pre-installed servo frames
• Pre-threaded linkages, all linkages pre-installed
• Control horns already installed
• Richly illustrated, German-language building instructions

Technical Data:

• Wingspan: 299 cm
• Fuselage length: 156 cm
• Wing profile: RG-14 mod.
• Wing area: 57.1 dm²
• Flying weight approx.: 2700g (without battery)

Required Accessories:

• Motor: D-Power AL42-07
• Controller: D-Power Comet 60A
• Battery: 3-4S LiPo 3700mAh
• Propeller: 13x6.5” @ 4S / 15x8” @ 3S
• Rudder servo: 1x D-Power DS-340BBMG
• Elevator servo: 1x D-Power DS-340BBMG
• Aileron servos: 2x D-Power DS-840BBMG
• Flap servos: 2x D-Power DS-840BBMG
• Remote control system: at least 8 channels