Junsi iCharger DX6 - 2x 6S LiPo, 1x 1500W
As of April 2026 · Prices incl. VAT unless stated otherwise.
-
Delivery time Germany: 1-3 business days.
-
Free shipping on orders over 129 EUR (within Germany, excluding product-dependent surcharges!)
Junsi iCharger DX6 - 2x 6S LiPo, 1x 1500W
Junsi iCharger DX6 - 2x 6S LiPo, 1x 1500W
All Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! AGM batteries may not be charged in the PB program!
The new DX6 charger combines the advantages of the well-known Junsi iCharger 406DUO with the portability of a small pocket charger. Despite its small dimensions of 92 x 112 x 40 mm, there have been no compromises in performance and usability. The newly developed rotary knob has an excellent pressure point and greatly facilitates operation.
The technical data is impressive: 1500W charging power (from >25V), 1-6s LiXx cells and up to 32 amps charging current are sufficient even for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can also be charged.
The discharge power is 60 watts total (40W per output if only one output is used), but can be increased to up to 1600W using an external load (discharge resistor). Of course, the iCharger DX6 also supports regenerative charging. In this process, the battery capacity, for example from a full flight battery, is fed back into the supply battery.
The balancing current of 4 amps total (2A per output) always ensures perfectly matched cell voltages.
A USB-C PD port for charging smartphones etc (5V/3A, 9V/2A, 12V/1.5A) or for software updates is also installed. The Micro SD slot can be used for data logging, but also for future updates.
Power is supplied via an XT-90 connector on the back.
The charging outputs are located on the front and are designed as XT-60.
Also integrated is a servo tester; please note that an external power supply is necessary!
The menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.
A 2.4" IPS LCD display ensures good readability even in low light.
Instructions in English are included with the charger on a CD; the German version can be downloaded from us.
All Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making!
AGM batteries may not be charged in the PB program!
Why Der Himmlische Höllein?
An excerpt from our FAQ
How long is the processing time?
The processing time for orders where all items are in stock is a maximum of 24 hours. If products are missing from your order, we will immediately send you an order confirmation with a delivery date for the missing items.
Do you also ship internationally?
Of course, we also ship internationally. You can find more information under Shipping Methods.
How can I return it?
You can return purchased items within the statutory withdrawal period. You can find more information on this in the Widerrufsbelehrung (right of withdrawal policy).
