Junsi iCharger X12 Charger, up to 1100 Watt, DC 11-53 Volt, 1-12 LiXX

All Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! AGM batteries may not be charged in the PB program!

Very compact 1100W charger with integrated balancer, USB port and card slot for Micro SD cards and 2A balancer current! With the new iCharger X12, the renowned manufacturer Junsi has launched a pocket-sized charger that can charge up to 12S LiXX! Despite its small size of 112x64x37 mm, there were no compromises in terms of performance and usability.
The technical data is impressive: 1100W charging power (from 23.5V input voltage), 1-12S LiXX cells and up to 30 amps charging current are sufficient even for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can also be charged.
The discharge power is 50W, but can be increased to up to 1100W by means of an external load (discharge resistor). The iCharger X12 can, of course, also perform regenerative charging. Here, the battery capacity, for example, of a full flight battery, is fed back into the supply battery. The balancer current of 2 amps always ensures perfectly balanced cell voltages, even with large batteries. A USB port and Micro SD slot can be used for logging data, but also for future updates. The menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.
A 2.4" IPS LCD display ensures good readability even in low light.

ATTENTION! To be able to charge 12S, a 13-pin XH connector strip on the battery is required! There is NO balancer board included to charge e.g. 2x6S as 12S! This must be purchased separately (CB-12XH). For 10S as 2x 5S, the well-known CB-1010 with the 11-11 Wire can be used!  

Technical data:

• Microprocessor-controlled high-performance quick charger/discharger and balancer
• 2.4 inch IPS LCD color display - 320x240
• Supported battery types: LiIo/LiPo/LiFe/LIHV/LTO/NiZn, NiMH/NiCd, Pb
• Cell count: 1-12 LiIo/LiPo/LiFe/LIHV/LTO/NiZn
• 1-32 NiMH/NiCd
• 1-20Pb (2-40 V)
• Input voltage: DC 11-53 V
• Input current: < 35A
• Max. charging power: 1100W from approx. 23.5V input voltage
• Charging current: 0.05 - 30A
• Max. discharge power: 50W
• Discharge current: 0.05 - 30A
• Regenerative discharge: up to 1100W
• Discharge with external load max.: 1500W 50V/30A
• Balancer current: 2A per cell
• Automatic fan control - 1 fan
• Micro USB Port
• Micro SD slot for storing logs and data
• Dimensions: 112x64x37 +/- 0.5mm
• Weight: 230g
• Further functions: Storage of charging programs and export to SD card
• Internal resistance measurement of the cells
• Servo tester
• Firmware update possible via USB connection

Scope of delivery:

• Junsi iCharger X12
• 1x output cable with XT60 socket
• 1x input cable with XT60 socket
• Installation CD with software