KAVAN Receiver R10 STABI, 10-Channel, 2.4GHz, # KAV18.10010S

The KAVAN R10 STABI 10-channel telemetry receiver operates with a simultaneous dual-frequency Twin 2.4 GHz transmission system. It features 10 high-precision PWM channels and 16- or 24-channel S.BUS mode. Two detachable antennas with IPEX4 connectors ensure full signal strength over a range of up to ten kilometers. It is particularly suitable for gliders, but can also be used for other models. With redundancy support, it can be connected as a primary receiver via S.BUS. In conjunction with the Twin 2.4GHz protocol, both receivers operate simultaneously. Thanks to the F.BUS connection option, you can also easily and quickly connect it to several different telemetry devices, enabling bidirectional data transmission via a single cable.

It features advanced interference suppression for reliable, stable signal transmission over the entire range. The intelligent assignment of the transmission system speeds up binding. The Blackbox function stores basic flight data. The operating states of the receiver are indicated by an LED display. Intelligent binding allows wireless firmware updates.

The R10 Stabi offers enhanced ADV stabilization functions. ADV stabilization provides an advanced mode with a range of programmable stabilized channels and a wide range of applications.

The classic stabilization mode has been extended by 5 additional stabilization channels, enabling pin mapping for each channel in some flight modes such as stabilization, auto-level (attitude hold), hover, and knife-edge with aircraft models.

Advanced stabilization features include high-precision telemetry sensors for monitoring altitude, vertical speed, etc.

In ADV mode, all output pins are configurable for stabilization and other advanced features, such as sharing Stab files, programmable parameters, and developer access, etc.

Technical data:

• RF transmission system: Twin 2.4 GHz
• Dimensions: 64×16.6×12.4 mm (L×W×H)
• Weight: 9.4 g
• Operating voltage: 3.5–12 V (recommended battery 2S LiXX)
• Operating current: ≤120 mA at 5 V
• Vario - vertical speed measuring range: ±10 m/s
• Vario - altimeter range and resolution: -700 m to 10,000 m, 0.1 m
• External voltage measuring range via AIN2: 0–35 V
• Antenna connector: IPEX4
• Compatibility: Twin 2.4 GHz
• Max. radiated power: < 20 dBm
• Operating frequency: 2.400–2.4835 GHz

Functions:

• Increased protection against RF interference and more stable RF transmission
• Simultaneous 2.4 GHz dual-frequency transmission system with intelligent binding
• Integrated advanced stabilization functions (R10 Stabi)
• Integrated high-precision telemetry sensor (altitude, vertical speed, etc.)
• Blackbox function
• High maximum operating range
• Wireless firmware updates (OTA - OverTheAir)
• 10 configurable channels
• CH1: PWM / S.BUS OUT / FPort / S.Port / SBUS IN
• CH2–10: PWM / SBUS OUT / FBUS / S.Port
• F.BUS / S.Port
• SBUS OUT Port (supports 16/24CH mode)
• Port SBUS IN (supports signal redundancy)