KAVAN V15 Transmitter, BLUE, 24-channel, 2.4GHz
# KAV16.1004

KAVAN V15 is a 24-channel RC set for experienced hobbyists and sports modelers. It uses the Twin 2.4 GHz transmission system with full telemetry support. The system offers a peak response time of up to 4 ms, over distances of up to tens of kilometers. You can also choose the ACCST D16 or ACCESS transmission systems, also with telemetry. The Kavan V15 can therefore be connected to many KAVAN or FrSky receivers, with or without telemetry, with classic PWM and serial outputs.

The design of the V15 transmitter retains the functions and proven features of the V20 transmitter, but is smaller, lighter, and more portable.
The set is suitable for controlling various aircraft or heli/multicopter models. You can also easily set up the V15 for ships or land models.
The Kavan V15 offers a variety of functions and mixers available to you in the ETHOS™ operating system. You can conveniently adjust these to your liking using the multi-function aluminum rotary knob and the ETHOS interface.

Two highly precise gimbals with aluminum gimbals are available. This ensures perfectly smooth stick movement in every direction. Their position is detected by high-quality Hall sensors. Compared to potentiometers, they have higher resolution and are not subject to mechanical wear (especially in the center position) and are better protected against moisture and dust. Control is therefore more accurate and reliable.

To control other functions, there are 4 three-position switches, 2 two-position switches (1 momentary), 2 side rotary knobs, 4 freely programmable buttons (front) and two momentary buttons (rear), 2 programmable rotary knobs for the mixers and 4 digital trimmers. The trim levers and knobs are made entirely of metal, precisely CNC machined. The arrangement of the controls and the ergonomics of the housing are based on the proven and extensively tested design of the V20 transmitter.

The transmitter's housing is robust and fits perfectly in the hand. Rubberized grips on the sides and back of the transmitter ensure a firm, comfortable, and secure hold. From here, you can easily reach all controls. The gimbals are located near the edges of the transmitter.

The built-in 128 MB flash memory neatly stores all your models or scripts. If that's not enough, you can expand it with a MicroSD card. For memory access, use the USB-C connector, which also serves for charging. A built-in balancer takes care of your 2600mAh 2S lithium drive battery.

Features:

• Color display 2.95" TFT with backlight and a resolution of 640×360 px
• Up to 20 flight modes for perfect control of your model in all conditions
• Full telemetry with data transmission from a variety of sensors and the ability to write to an SD card
• Memory for 64 models, expandable via SD card
• Voice output of telemetry via cable with 3.5 mm jack connector
• Updatable software
• 4 three-position switches, 2 two-position switches (1 momentary switch)
• 2 side rotary knobs, 2 momentary buttons on the back
• 4 freely programmable buttons (front)
• Precise Hall sensor gimbals with aluminum panel
• Trainer-student mode via cable or wirelessly via Bluetooth®
• Smart Port socket for programming servos
• Model names with 15 characters
• Subtrim
• Servo reverse
• Setting of endpoints and travel limits
• Setting of servo speed
• Data reset
• Fail-Safe
• Dual rate throws
• Setting of throw size in 2 exponential curves or 21-point curves.
• Freely programmable mixers
• Engine off
• Safe idle
• Logically linked switches
• Clear user menu with customizable widgets
• Servo monitor and servo tester
• Three timers (stopwatch or timer)
• Model operating time
• Transmitter operating time
• Display of preset positions of controls when switching on the transmitter
• Adjustable intensity of display backlight
• Gimbal calibration
• Sound and vibration warning
• Range check
• Setting of operating mode with 3 receivers (redundancy)

Technical data:

• Transmission system: 2.4 GHz simultaneous on two frequencies
• Antenna: two built-in antennas
• Gain: 3.01 dBi
• Dimensions: 198.5×194.1×94.5 mm (W×H×D)
• Weight: 640 g (without battery)
• Operating system: ETHOS™
• Internal RF module: TW-ISRM
• Number of channels: up to 24
• Operating voltage range: 6.5–8.4 V (2S LiPo/Li-Ion battery)
• Battery compartment dimensions: 69.5×38.5×20 mm (W×H×D)
• Operating temperature: (-10)–60 °C
• Operating current: 330 mA at 7.4V
• Operating frequency: 2401.5–2482 MHz
• Max. transmit power: 17.77 dBm (E.I.R.P.)
• Charging current: ≤1 A ± 200 mA
• USB adapter voltage: 5 V + 0.2 V
• USB adapter current: >2.0 A
• Display: LCD touch display with backlight and a resolution of 640×360 px at 2.95" diagonal
• Compatibility: Twin 2.4GHz / ACCST D16 / ACCESS

Scope of delivery:

• KAVAN V15 transmitter white
• Transmitter battery 2S Li-ion 2600mAh