KAVAN Transmitter V15, WHITE, 24-Channel, 2.4GHz
# KAV16.1003

KAVAN V15 is a 24-channel RC set for experienced hobbyists and sports modelers. It uses the Twin 2.4 GHz transmission system with full telemetry support. The system offers a peak response time of up to 4 ms, over distances of up to tens of kilometers. You can also choose ACCST D16 or ACCESS transmission systems, also with telemetry. The Kavan V15 can therefore be connected to many KAVAN or FrSky receivers, with or without telemetry, with classic PWM and serial outputs.

The V15 transmitter's design retains the functions and proven features of the V20 transmitter but is smaller, lighter, and more portable.
The set is suitable for controlling various aircraft or heli/multicopter models. You can also easily set up the V15 for boats or land models.
The Kavan V15 offers a wide range of functions and mixers, which are available to you in the ETHOS™ operating system. These can be conveniently adjusted to your own preferences using the multi-function aluminum rotary knob and the ETHOS interface.

Two highly precise gimbals with aluminum gimbals are available. This ensures perfectly smooth stick movement in every direction. Their position is detected by high-quality Hall sensors. Compared to potentiometers, they have a higher resolution and are not subject to mechanical wear (especially in the center position) and are better protected against moisture and dust. Control is therefore more accurate and reliable.

To control other functions, there are 4 three-position switches, 2 two-position switches (1 momentary), 2 side rotary knobs, 4 freely programmable buttons (front) and two momentary buttons (rear), 2 programmable rotary knobs for mixers and 4 digital trims. The trim levers and buttons are entirely metal, precisely CNC machined. The arrangement of controls and the ergonomics of the housing are based on the proven and extensively tested design of the V20 transmitter.

The transmitter's housing is robust and fits perfectly in the hand. Rubberized grips on the sides and back of the transmitter ensure a firm, comfortable, and secure hold. From here, you can easily reach all controls. The gimbals are located near the edges of the transmitter.

The built-in 128 MB flash memory neatly stores all your models or scripts. If even that's not enough, you can expand it with a MicroSD card. For memory access, use the USB-C connector, which also serves for charging. A built-in balancer ensures your 2600mAh 2S lithium drive battery.

Functions:

• 2.95" TFT color display with backlight and a resolution of 640×360 px
• Up to 20 flight modes for perfect control of your model under all conditions
• Full telemetry with data transfer from a variety of sensors and the ability to write to an SD card
• Memory for 64 models, expandable via SD card
• Voice output of telemetry via cable with 3.5 mm jack connector
• Updatable software
• 4 three-position switches, 2 two-position switches (1 momentary switch)
• 2 side rotary knobs, 2 momentary buttons on the back
• 4 freely programmable buttons (front)
• Precise Hall sensor gimbals with aluminum panel
• Teacher-student mode via cable or wirelessly via Bluetooth®
• Smart Port socket for programming servos
• Model names with 15 characters
• Sub-trim
• Servo reverse
• End point and travel limit adjustment
• Servo speed adjustment
• Data reset
• Fail-Safe
• Dual rate throws
• Adjustment of throw size in 2 exponential curves or 21-point curves.
• Freely programmable mixers
• Engine off
• Safe idle
• Logically linked switches
• Clear user menu with customizable widgets
• Servo monitor and servo tester
• Three timers (stopwatch or countdown timer)
• Model operating time
• Transmitter operating time
• Display of preset control positions when turning on the transmitter
• Adjustable display backlight intensity
• Gimbal calibration
• Sound and vibration warning
• Range check
• Setting of operating mode with 3 receivers (redundancy)

Technical data:

• Transmission system: 2.4 GHz simultaneous on two frequencies
• Antenna: two built-in antennas
• Gain: 3.01 dBi
• Dimensions: 198.5×194.1×94.5 mm (W×H×D)
• Weight: 640 g (without battery)
• Operating system: ETHOS™
• Internal RF module: TW-ISRM
• Number of channels: up to 24
• Operating voltage range: 6.5–8.4 V (2S LiPo/Li-Ion battery)
• Battery compartment dimensions: 69.5×38.5×20 mm (W×H×D)
• Operating temperature: (-10)–60 °C
• Operating current: 330 mA at 7.4V
• Operating frequency: 2401.5–2482 MHz
• Max. transmit power: 17.77 dBm (E.I.R.P.)
• Charging current: ≤1 A ± 200 mA
• USB adapter voltage: 5 V + 0.2 V
• USB adapter current: >2.0 A
• Display: LCD touch display with backlight and a resolution of 640×360 px at 2.95" diagonal
• Compatibility: Twin 2.4GHz / ACCST D16 / ACCESS

Scope of delivery:

• KAVAN V15 white transmitter
• 2S Li-ion 2600mAh transmitter battery