Lightning 2100 ARF (with servos, motor, ESC), 1400/2100mm Spw.

Almost-ready-to-fly fast glider made of durable EPO foam in "Hotliner" style for experienced pilots.

The secret of the Lightning 2100 is its three-piece wing. If you use all three wing sections, you have a good, swift 2-meter glider. If you only use the outer part of the wing, you have a hotliner with a wingspan of 1500 mm. It is easy to repair and, thanks to the removable two-/three-piece wing and removable horizontal stabilizer, it is very space-saving, so you can easily pack it for a mountain hike or a holiday.

The slender model fuselage made of EPO foam with bonded composite reinforcements comes with the pre-installed C2415-1150KV brushless outrunner motor, 10x7 inch folding propeller, built-in 40A brushless ESC, and 4 servos. In the front part of the fuselage, under the removable canopy, there is a battery compartment. For the Lightning 2100, you will need a 3-cell 2200 mAh LiPo battery with a discharge rate of at least 25C.

The EPO horizontal stabilizer is removable for easy transport and storage. The wing with its fast profile, made of EPO foam and reinforced with three carbon rods, is connected by a carbon connector. The wing is attached to the fuselage with two screws. The ailerons are controlled by two servos mounted in the wing. Ailerons, rudder, elevator, and motor are controlled.

The Lightning 2100 is designed for advanced modelers who have already mastered controlling faster models with ailerons.

The ARF Set includes:

• The finished model with brushless motor, ESC, folding propeller, 4 servos, and building instructions.

Required accessories:

• 3S/2200mAh LiPo from 25C
• 2.4GHz transmitter from 5 channels
• 2.4GHz receiver