Product Safety Information:

Signal word: Warning

Hazard statements:

H226 Flammable liquid and vapour.
H336 May cause drowsiness or dizziness.

Precautionary statements:

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P271 Use only outdoors or in a well-ventilated area.
P403+P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of in accordance with official regulations.

Special labelling for certain mixtures

EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe aerosol or mist.

ORACOLOR^® 2K Elastic Paint, Cream, 100ml Can

ORACOLOR^® is the colour-matching paint system for all ORACOVER^®, ORASTICK^®, and ORATEX^® products.

The special feature of ORACOLOR^® is that it is a highly concentrated 2-component paint, which is mixed with a spray hardener for airbrushing and spraying or with the paint hardener for painting.

ORACOLOR^® meets the highest demands and is used in general aviation as an approved paint for aircraft painting. It is filler-free and extremely economical. With 100 ml of paint, approximately 1.0 - 1.2 m² of surface can be painted. An individual processing viscosity can be adjusted with ORACOLOR^® Special Thinner (No. 100-999), whether for spraying or brushing.

ORACOLOR^® is available in almost identical colours to all ORACOVER^®, ORASTICK^®, and ORATEX^® products. After complete curing, ORACOLOR^® is fuel and iron resistant.

Features:

• 2-component
• Chemically permanently elastic
• Plasticizer-free
• Fuel resistance
• Iron resistant
• Particularly light, as filler-free
• Highly pigmented

Processing:

• Mixing ratio: 2 parts paint : 1 part hardener
• for airbrush application, add up to 40% thinner
• for spray application, add thinner as needed
• Not suitable for substrates that are not resistant to organic solvents.
• Please note the necessary accessories!

Before use, please note:

• For ORACOLOR^® paint, you need a suitable hardener.
• To prepare substrates for painting, ORACOLOR^® Filler (No. 100-999) is available in white.
• To use the high-gloss ORACOLOR^® paints as matte paints, we recommend using the matting agent (Art No. 100-995 and 1100-995). The degree of matting/gloss can be varied by adjusting the amount of matting agent added.
• For paints in fluorescent colours, please note: Since the chemical properties of fluorescent pigments create a matte effect, overcoating with ORACOLOR^® UV Protective Varnish is required to achieve a glossy surface and for UV resistance.
• Not suitable for substrates that are not resistant to organic solvents.