Product safety information:

Signal word: Warning

Hazard statements:

H226 Flammable liquid and vapour.
H336 May cause drowsiness or dizziness.

Precautionary statements:

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P271 Use only outdoors or in a well-ventilated area.
P403+P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Special labelling of certain mixtures

EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe aerosol or mist.

ORACOLOR^® 2K Elastic Paint, Pink, 100ml Can

ORACOLOR^® is the perfectly colour-matched paint system for all ORACOVER^®, ORASTICK^®, and ORATEX^® products.

The special feature of ORACOLOR^® is that it is a highly concentrated 2-component paint, which is mixed with a spray hardener for airbrushing and spraying, or with a paint hardener for general painting.

ORACOLOR^® meets the highest standards and is used in general aviation as an approved aircraft paint. It is filler-free and extremely efficient. 100 ml of paint can cover approx. 1.0 - 1.2 m² of surface. An individual processing viscosity can be adjusted with ORACOLOR^® Special Thinner (Art. No. 100-999), whether for spraying or brushing.

ORACOLOR^® is available in almost identical colours to all ORACOVER^®, ORASTICK^®, and ORATEX^® products. After complete curing, ORACOLOR^® is fuel-resistant and iron-proof.

Features:

• 2-component
• Chemically permanently elastic
• Plasticizer-free
• Fuel resistance
• Iron-proof
• Especially light, as filler-free
• Highly pigmented

Application:

• Mixing ratio: 2 parts paint : 1 part hardener
• For airbrush applications, add up to 40% thinner
• For spray applications, add thinner as needed
• Not suitable for surfaces that are not resistant to organic solvents.
• Please note the required accessories!

Before use, please note:

• For ORACOLOR^® paint, you need a suitable hardener.
• To prepare surfaces for painting, ORACOLOR^® Filler (Art. No. 100-999) is available in white.
• To use the high-gloss ORACOLOR^® paints as matte paints, we recommend using the matting agent (Art. No. 100-995 and 1100-995). The degree of matting/gloss can be varied by adjusting the amount of matting agent added.
• For paints in fluorescent colours, please note: Since the chemical properties of fluorescent pigments create a matte effect, overcoating with ORACOLOR^® UV Protective Lacquer is necessary to achieve a glossy surface and for UV resistance.
• Not suitable for surfaces that are not resistant to organic solvents.