Product Safety Information:

Signal word: Danger

Hazard statements

H226 Flammable liquid and vapor.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.

Precautionary statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor.
P331 Do NOT induce vomiting.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

ORACOLOR^® UV Protective Lacquer transparent, 100ml can

ORACOLOR^® UV Protective Lacquer is a 2-component lacquer that extends the lifespan of fluorescent paints. Since the chemical properties of fluorescent pigments create a matte effect, overcoating with ORACOLOR^® UV Protective Lacquer is necessary to achieve a glossy surface and UV resistance. Overcoating with UV protective lacquer can be done after approx. 3-5 hours of drying time. After full curing, ORACOLOR^® Model Building Lacquer is FUEL and IRON-RESISTANT. We would also like to point out that our model building lacquers are highly concentrated and, depending on the spray gun, may need to be thinned by up to 40% with ORACOLOR^® Special Thinner to ensure optimal flow, especially in colder or warmer temperatures.

Features:

• 2-component
• Chemically permanently elastic
• Plasticizer-free
• Fuel resistance
• Iron-resistant

Application:

• Mixing ratio: 2 parts lacquer : 1 part hardener
• For airbrush application, add up to 40% thinner
• For spray application, add thinner as needed
• Please observe the necessary accessories!

Before use, please note:

• You need a suitable hardener for ORACOLOR^® Lacquer.
• Not suitable for surfaces that are not resistant to organic solvents.