Danger

Hazard statements:

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.

Precautionary statements:

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents/container according to regional regulations.

Additional information:

EUH066 Repeated exposure may cause skin dryness or cracking. Explosive mixtures may form without adequate ventilation.

PALETTI synthetic resin spray paint, cream white glossy, 400ml

Areas of application:
Suitable for wood, metal, paper, glass, GRP, foil, plastic (Lexan), EPO, EPP, Elapor

Quality: High-quality synthetic resin lacquer

Properties:

• Quick-drying
• high covering and filling power
• permanently color and gloss stable
• scratch, impact and shock resistant
• excellent adhesion
• resistant to synthetic oils
• heat resistant up to approx. 75°C

 Times: All times refer to room temperature (= +20°C to 22°C).
Depending on the thickness of the applied paint layer, drying times may differ from the specified times.
If in doubt, allow the paint to dry longer!

Application:
Surface pre-treatment:
the surface must be clean, dry and grease-free (wash Lexan with acetone). Sand and prime with filler.
Allow to dry for 1-2 hours.

General painting: Bring can to room temperature. Shake vigorously before use and test spray. Spray several thin layers at intervals of approx. 2 minutes. Spray distance approx. 25cm.

Painting a single color:
Several layers of the same color can be sprayed over each other within 2 hours. Do not overcoat between 2 hours and 24 hours.

Painting several colors over each other:
The color to be overcoated must always be dry.
Waiting time between first and second color: approx. 24 hours.

Attention:
Do not spray on acrylic paint and do not spray with acrylic paint

Drying:  * dust dry after approx. 30 min
                     * tack-free after approx. 3 hours
                     * fully dry after approx. 24 hours

Yield: 400 ml is sufficient for approx. 1 m² depending on color shade and covering power

Recommendation: Only spray in dry weather and in sheltered areas, as well as in well-ventilated rooms. Temperatures preferably between +15°C and +25°C

Disposal: Only put the completely emptied can into the recycling container. Take the not emptied paint can to the hazardous waste collection point.

Tip: When painting small areas, we recommend using a cardboard box as a stencil, into which a hole slightly larger than the area to be painted is cut. The cardboard is held about 1-2 cm above the area. With this method, a significant part of the spray mist is intercepted.

Important: This application information is provided to the best of our knowledge. However, it is only intended as non-binding advice and does not exempt the user from their own tests regarding suitability for the intended applications. The application and processing are beyond our control and are therefore exclusively the responsibility of the user.