Danger

Hazard statements:

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.

Precautionary statements:

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents/container in accordance with regional regulations.

Additional information:

EUH066 Repeated exposure may cause skin dryness or cracking. Explosive mixtures may form without adequate ventilation

PALETTI Synthetic Resin Lacquer Spray, Pastel Orange Gloss, 400ml

Areas of application:
Suitable for wood, metal, paper, glass, GRP, foil, plastic (Lexan), EPO, EPP, Elapor

Quality: High-quality synthetic resin lacquer

Features:

• Fast drying
• high covering and filling power
• permanently colour and gloss resistant
• scratch, impact and shock resistant
• excellent adhesion
• resistant to synthetic oils
• heat resistant up to approx. 75°C

 Times: All times refer to room temperature (= +20°C to 22°C).
Depending on the thickness of the applied lacquer layer, drying times may differ from the specified times.
When in doubt, allow the lacquer to dry longer!

Application:
Surface pre-treatment:
The surface must be clean, dry and grease-free (wash Lexan with acetone). Sand and prime with filler.
Allow to dry for 1-2 hours.

General painting: Bring can to room temperature. Shake vigorously before use and test spray. Spray several thin coats at intervals of approx. 2 minutes. Spray distance approx. 25cm.

Painting one colour:
Several coats of the same colour can be sprayed on top of each other within 2 hours. Do not overcoat between 2 hours and 24 hours.

Painting multiple colours on top of each other:
The colour to be overcoated must always be dry.
Waiting time between first and second colour: approx. 24 hours.

Attention:
Do not spray on acrylic lacquer and do not spray with acrylic lacquer

Drying:  * dust-dry after approx. 30 min
                     * tack-free after approx. 3 hours
                     * fully dry after approx. 24 hours

Yield: 400 ml is sufficient for approx. 1 m² depending on the colour and covering power

Recommendation: Only spray in dry weather and in wind-protected areas, as well as in well-ventilated rooms. Temperatures preferably between +15°C and +25°C

Disposal: Only put the completely empty can in the recycling container. Take the non-empty lacquer can to the hazardous waste collection point.

Tip: When painting small areas, we recommend using a cardboard box as a stencil, in which a hole, slightly larger than the area to be painted, is cut. The cardboard is held approx. 1-2 cm above the area. This method catches a significant part of the spray mist.

Important: This application information is provided to the best of our knowledge. However, it is only intended as non-binding advice and does not relieve the user from their own tests regarding suitability for the intended applications. Application and processing are beyond our control and are therefore exclusively the responsibility of the user.