Danger

Hazard statements:

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.

Precautionary statements:

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents/container according to regional regulations.

Additional information:

EUH066 Repeated exposure may cause skin dryness or cracking. Explosive mixtures may form without adequate ventilation.

PALETTI synthetic resin spray paint, Reseda green glossy, 400ml

Areas of application:
Suitable for wood, metal, paper, glass, GRP, foil, plastic (Lexan), EPO, EPP, Elapor

Quality: High-quality synthetic resin paint

Properties:

• Quick-drying
• high covering and filling power
• permanently colour and gloss resistant
• scratch, impact and shock resistant
• excellent adhesion
• resistant to synthetic oils
• heat resistant up to approx. 75°C

 Times: All times refer to room temperature (= +20°C to 22°C).
Depending on the thickness of the applied paint layer, drying times may differ from the stated times.
If in doubt, allow the paint to dry for longer!

Application:
Surface preparation:
The surface must be clean, dry and grease-free (wash Lexan with acetone). Sand and prime with filler.
Allow to dry for 1-2 hours.

General painting: Bring the can to room temperature. Shake well before use and spray a test area. Spray several thin coats at intervals of approx. 2 minutes. Spraying distance approx. 25cm.

Painting one colour:
Several coats of the same colour can be sprayed over each other within 2 hours. Do not overpaint between 2 hours and 24 hours.

Painting several colours over each other:
The colour to be overpainted must always be dry.
Waiting time between first and second colour: approx. 24 hours.

Attention:
Do not spray on acrylic paint and do not spray with acrylic paint

Drying:  * dust dry after approx. 30 min
                     * tack-free after approx. 3 hours
                     * thoroughly dry after approx. 24 hours

Yield: 400 ml is sufficient for approx. 1 m² depending on colour shade and opacity

Recommendation: Only spray in dry weather and in sheltered areas, as well as in well-ventilated rooms. Temperatures preferably between +15°C and +25°C

Disposal: Only place the completely emptied can in the recycling container. Take the unemptied paint can to a hazardous waste collection point.

Tip: When painting small areas, we recommend using a cardboard stencil with a hole cut in it, slightly larger than the area to be painted. Hold the cardboard about 1-2 cm above the area. This method traps a significant part of the spray mist.

Important: This application information is provided to the best of our knowledge. However, it is only an informal guide and does not relieve the user from their own checks regarding suitability for the intended applications. Application and processing are beyond our control and are therefore solely the responsibility of the user.