Power Box Sensor 6.0/7.8V with JR High-Current Connector,
Modellbau Deutsch # 6330

The PowerBox Sensor V3 is the third generation of the world-renowned PowerBox Sensor. Due to its compact design and versatile applications, the PowerBox Sensor has been the standard in small to medium-sized models for almost 20 years.

Thanks to the use of modern components, the Sensor V3 could be significantly reduced in size. Its depth, for example, was exactly halved from 22 mm to 11 mm. Nevertheless, the Sensor V3 fits precisely into the cutout of its predecessor!

By using an elegant, milled, and anodized aluminum housing, the usable cooling capacity has been significantly increased – the PowerBox Sensor V3 can deliver approximately 35% more continuous current! Its short-term load capacity has even doubled – the Sensor V3 can handle over 20 A for several seconds!

Four different battery types can be selected for power supply: LiPo, LiIon, LiFePo, and NiMh. Ultra-bright RGB LEDs are used for the battery voltage display, signaling the charge status of the batteries with different colors.

For CORE customers, there's an additional special feature: both battery voltages can be displayed directly on the transmitter via telemetry!

• Powerful battery switch
• Very light and compact design
• Double-regulated output voltage
• Redundant switch and regulator design
• Adjustable output voltage 6.0 V or 7.8 V
• Voltage display for each battery separately via RGB LEDs
• Telemetry support for the CORE
• 4 battery types supported: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH
• Regulator monitoring
• Suppression of servo back currents

Technical Data

• Operating voltage 4.0V - 9.0V
• Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiMh
• Current consumption operation 30 mA
• Current consumption standby 10 µA
• Peak current load 2x10A
• Dropout voltage 0.25 V
• Output voltage 6.0 V/ 7.8 V stabilized
• Dimensions 65 x 26 x 11 mm
• Weight 30 g
• Temperature range -30 °C to +105 °C