Possible Hazards - Presto Filler Styrene-Free Comp. A (Filler)

Hazard-determining component for labeling

Vinyltoluene (all isomers)
Barium sulfate
1,4-Dihydroxybenzene

Signal word: Attention

Pictograms

Safety instructions GHS / H-phrases

• Flammable liquid and vapor. Causes skin irritation. Causes serious eye irritation.

Safety instructions GHS / P-phrases

• P101 If medical advice is needed, have product container or label at hand.
• P102 Keep out of reach of children.
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P264 Wash hands thoroughly after handling.
• P280 Wear protective gloves / protective clothing / eye protection / face protection.
• P302 P352 IF ON SKIN: Wash with plenty of water.
• P305 P351 P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P332 P313 If skin irritation occurs: Get medical advice / attention.
• P403 P233 Store in a well-ventilated place. Keep container tightly closed.
• P501 Dispose of contents / container in accordance with local regulations.

Possible Hazards - Hardener Paste for Filler (Comp. B)

Hazard-determining component for labeling

Dibenzoyl peroxide

Pictograms:

Safety instructions GHS / H-phrases

H242 Heating may cause a fire.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H410 Very toxic to aquatic life with long lasting effects.

Safety instructions GHS / P-phrases

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.

P280 Wear protective gloves / protective clothing / eye protection / face protection.
P302 P352 IF ON SKIN: Wash with plenty of water.
P305 P351 P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403 P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents / container in accordance with local regulations.

Presto SF Polyester Fine Filler, styrene-free
242 g filler + 8 g hardener

Highly elastic, two-component polyester fine filler in styrene-free quality.

• Consists of highly reactive, unsaturated polyester resin, filled with a new, micro-fine pigment-filler combination
• Provides a very smooth surface
• Easy to process
• Easy to sand
• Very good adhesion
• Asbestos and silicone-free
• Resistant to weak acids, weak alkalis; propellants, solvents, water and de-icing salts

Areas of application:
For filling small imperfections and for thin "fine filling" of already pre-treated surfaces. Suitable for metal, wood, concrete or surfaces pre-filled with presto filling compound. Micro-fine fillers result in a very smooth surface.
Universally applicable in the entire automotive sector, mechanical engineering, for hobby work on many materials.

Technical data:
Base: Polyester resin with a pigment-filler combination
Color: White
Form: Pastry, soft, thixotropic
Processing time (at 20 °C): approx. 7 - 8 minutes
Processing temperature: from 12 °C
Drying (at 20 °C, 50% relative humidity)-> Sandable after: approx. 30 - 40 minutes
Flash point: approx. 33 °C (filler); not applicable for hardener
Density (at 20 °C): Filler: 1.7 g/cm³, Hardener: 1.15 g/cm³
Hardener addition: 2 - 4 % (optimal mixture 2.5 %)
Temperature resistance of the cured material: 120 °C

Shelf life/storage:
18 months if stored correctly (=10 -25 °C, max. 60% relative humidity) in the closed original container. Protect from direct sunlight, frost and moisture.