Primer No. 7, brush bottle 15ml

Adhesion Promoter (Primer No. 7), Brush Bottle 15ml

PP, PE, silicone and Teflon® cannot be bonded without pretreatment. If these materials are bonded only with adhesive, without primer, only adhesion and not a strong bond will be achieved. The primer allows for bonding polyolefins (polyethylene, polypropylene), PTFE, silicones and other materials that are difficult to bond.

Application:

Apply a thin layer of primer to the surfaces to be bonded and allow to air dry for a few seconds. Apply the adhesive and press the parts together. Handling strength after 1-2 minutes. High final strength is achieved after 24 hours. Close the bottle immediately after use.

Signal word: DANGER
Contains: n-Heptane

Hazard statements:

H225 Highly flammable liquid and vapor
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation
H336 May cause drowsiness or dizziness
H410 Very toxic to aquatic life with long lasting effects

Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor.
P331 Do NOT induce vomiting.
P403+P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/container according to local/national regulations.