CG Balancer Size "M", Black Edition Part-Q # 20160150

The rocker of the CG balancer, on which the model rests, has stops and therefore a maximum deflection of 10° in both directions. This prevents the model from falling off the rocker, even if, for example, the model's battery is removed.
Furthermore, the wing stop was arranged with a 10° incline. When the rocker is in the front end position (10°) at the stop, the model can be placed. In the neutral position during balancing, the wing stop no longer interferes.
The engraved scale allows the center of gravity to be set with millimeter precision. The wooden parts are CNC milled from high-quality and sturdy 15 mm birch multiplex. The plug-in system makes the CG balancer additionally stable and thus easy to assemble. The wooden parts are covered with self-adhesive rubber at the contact points to ensure the model is held securely and not damaged.

Operation:

• 1: Set the specified center of gravity for your model using the scale.
• 2: Move the rocker to the front stop position. It now has exactly 10° deflection. In this position, the stop can be used as an adjustment.
• 3: Your model will no longer slip due to the rubber pad. If it does, you can always check the correct position by moving the rocker to the front stop.
•    The model can now be balanced. Also check the gap at the base of the rocker. Setting the center of gravity at the front stop of the rocker has the advantage that the wing stop no longer interferes in the neutral position.
• 4: The rear stop serves to prevent the model from falling off if, for example, the battery is completely removed.

Technical data:

• Height of rocker, ball-bearing: 250 mm
• Max. model width with connector: 240 mm
• Max. model weight: 25.1 kg
• Max. center of gravity from leading edge: 200 mm
• Max. rocker angle: +/- 10°

Scope of delivery:

• CNC milled parts (unfinished and connected)
• 4 x M6 wing screw
• 2 x 626 2RS ball bearing
• 2 x ball bearing pressing aid
• 2 x M6 x 25 screw
• 4 x 2.9 x 9.5 self-tapping screw
• 6 x threaded inserts with hexagon socket for easy assembly
• 6 x M6 large washers
• 4 x M3 large washers
• 8 x M6 small washers
• 10 x wooden dowels
• 1 x self-adhesive neoprene rubber
• 2 x engraved Part-Q logo
• 2 x engraved scales
• 2 x engraved pointers
• 1 x illustrated assembly and operating instructions

The model stands are supplied as a kit.