CG Scale Size "XXL", Black Edition Part-Q # 20170350

The rocker of the CG scale on which the model rests has stops, allowing a maximum deflection of 10° in both directions. This prevents the model from falling off the rocker, even if, for example, the model's battery is removed.
Furthermore, the wing stop was arranged with a 10° slant. When the rocker is in the front end position (10°) at the stop, the model can be placed. In the neutral position during balancing, the wing stop no longer interferes.
The engraved scale allows the center of gravity to be set with millimeter precision. The wooden parts are CNC machined from high-quality and stable 15 mm birch plywood. The plug-in system makes the CG scale additionally stable and thus easy to assemble. The wooden parts are covered with self-adhesive rubber at the contact points to ensure the model is held securely and not damaged.

Operation:

• 1: Set the specified center of gravity for your model using the scale.
• 2: Move the rocker to the front stop position. It now has exactly 10° deflection. In this position, the stop can be used for adjustment.
• 3: Your model will no longer slip due to the rubber pad. If it does, you can always check the correct position by moving the rocker to the front stop.
• The model can now be balanced. Also check the light gap at the base of the rocker. Setting the center of gravity at the front stop of the rocker has the advantage that the wing stop no longer interferes in the neutral position.
• 4: The rear stop serves to prevent the model from falling if, for example, the battery is completely removed.

Technical data:

• Rocker height, ball-bearing: 600 mm
• Max. model width with connector: 490 mm
• Max. model weight: 25.1 kg
• Max. CG position from leading edge: 200 mm
• Max. rocker angle: +/- 10°

Scope of delivery:

• CNC machined parts (unfinished and connected)
• 4 x Wing nut M6
• 2 x Ball bearing 626 2RS
• 2 x Ball bearing press-in aid
• 2 x M6 x 25 screw
• 4 x 2.9 x 9.5 self-tapping screw
• 6 x Threaded inserts with hexagon socket for easy assembly
• 6 x Washers M6 large
• 4 x Washers M3 large
• 8 x Washers M6 small
• 10 x Wooden dowels
• 4 x Rubber pads
• 2 x engraved Teil-Q logo
• 2 x engraved scales
• 2 x engraved pointers
• 1 x illustrated assembly and operating instructions

The model stands are supplied as a kit.