uniLIGHT EMBEDDED 1-channel LED controller, 7x30x2.5mm, 1g, 3A up to 16V

The EMBEDDED is currently the smallest, but most advanced light controller from uniLIGHT.at. At approx. 7x30x2.5mm, it is only as small as a matchbox, so it can be integrated anywhere, even directly into lights or industrial applications.
It supports 1 ½ functions: a full-featured, configurable channel and a second switched channel to operate, for example, the navigation light of a DUAL light.

It is equipped with a wealth of new and old functions and is therefore suitable for almost all applications. As a member of the uniLIGHTPLUS family, it can be fully programmed and configured with the programming cable and uniLIGHT DESK. Only the flashing pattern in solo operation and the speed of the pattern can be changed via the button.
Like other controllers from uniLIGHT, the EMBEDDED can be connected directly or via the included Y-cable to a battery. For uniLIGHT.at lights, this is usually a 2S LiPo battery. A new feature is that it can also be connected directly to the receiver in HV systems.

The EMBEDDED deliberately omits the standard connector for the lights because the controller can in most cases be placed directly in the lamp, i.e. soldered. Due to the then fixed wiring, there is also no short-circuit protection and no reverse polarity protection, which were omitted in favor of the size.

Technical Data

• Connection voltage: 4.8-9.6V
• Weight (without cable): 1g
• Dimensions: 7.3x30.8x2.6mm (W/L/H)
• Current max.: 3A, up to 16V
• Pulse current max.: 5A, up to 16V
• galvanically isolated circuits: NO
• Operation also without RC signal: YES
• Operation in uniLIGHTPLUS data mode: YES
• Effects with variable speed: 8 + 1 freely definable