Zepsus Magnetic Switch, DOUBLE, without voltage regulator, 20A continuous/40A short-term

Double magnetic switch 20A - 2 switches in one

Designed for RC jet aircraft and other models with dual power supply. It is equipped with 2 switches that are activated from a single point. Instead of turning on the ECU in one place and the receiver in another, with the Double Magnetic Switch everything is in one place.

The batteries are separate, so it is possible to use 3s on one switch and 2s on the other switch.

It can be used for receivers and ECUs as mentioned above. But also as a switch for a receiver and lighting; or receiver and smoke system, etc.

The switch is "Made in Denmark".

On/Off Function:

A clean and simple way to turn on your model, just slide the magnet over the marked area. The switch is mounted in the fuselage, and the magnet easily activates the switch from the outside. No more fumbling for small switches or plugging in connectors.

Failsafe:

This product has a built-in failsafe function. It retains its state for at least 10 seconds if disconnected from the battery. It protects the switch from power disturbances caused by poor battery connection, etc.

Standby Consumption:

The switch has extremely low standby consumption when turned off. The consumption is so low that the switch can remain connected to a small battery for several years without discharging it.

Technical Data:

• Input voltage range: 4 V - 13 V
• Extremely low dropout voltage: 39 mV at 20 A
• Output current constant: 20A @ +25C ambient temperature
• Output current surge: >40A
• Extremely low standby current: 5 µA (microamperes)
• Connectors: XT30
• Dimensions: 46 x 48 x 8 mm
• Weight: 12.7 grams
• Operating temperature range: -40 °C to +85 °C

Production Test:

All switches were tested for 30 seconds at 30A before delivery. Standby consumption is controlled and subjected to a visual inspection.

Scope of Delivery:

• Magnetic switch
• Zepsus sticker