A-10 Thunderbolt II, V2, EDF 70, PNP, Spw. 1500mm, incl. Reflex Gyro System

The most beautiful Warthog in the world

The A-10 Thunderbolt II V2 by FMS is the successor to the popular 2017 A-10. With its numerous scale details and exciting performance, the "Warthog" is a highlight for pilots and spectators at every airfield.

Even better now:
The features that made the V1 version so successful have been retained. The V2 version now comes with improved servos for more precision,
stronger ESCs with BEC, an improved landing gear, and many other small but significant enhancements.

Feel the difference:
No detail was overlooked in the further development of the A-10.

Powerful Drive:
The twin-engine jet is powered by two efficient 12-blade impellers with powerful brushless inrunner motors and two 80A ESCs with integrated BEC.

Lightweight PNP Construction:
The jet model is made of extra-strong and particularly light EPO foam material. All electronics such as the motor, impellers, ESCs, servos, and the electric retracts are already pre-installed in the model.
Just insert the battery, insert the receiver, and the A-10 V2 from FMS is ready – ready to put a big smile on your face.

Absolutely Scale:
The "Warthog" is a real eye-catcher – not only is its true-to-original flight image impressive, but also the numerous small details on the model.
Removable bomb and rocket dummies, replicated rivet lines, a painted pilot figure, authentic livery, and the electric retracts make the A-10 a feast for the eyes of scale enthusiasts.

Quick Assembly:
Thanks to the plug-in system, no more cables need to be connected during wing assembly – the contacts are automatically established by connectors embedded in the material when joined.

Features:

• Construction made of extra-strong EPO foam material
• Super true-to-original look and flight image
• Low weight yet high rigidity
• 2 Brushless inrunner motors installed
• NEW: instead of dual 70A ESCs, now 80A ESCs with external 8A BEC are installed
• Efficient 70mm 12-blade impeller installed
• Nine digital servos with metal gears for high control precision installed
• Built-in CNC machined retracts, fully made of metal
• NEW: Revised nose landing gear with minimized play
• Retracts with electrical overload protection
• NEW: The tires on the ball-bearing wheels have a longer lifespan due to an improved compound
• Removable bombs and rockets
• Painted pilot figure and instrument panel
• Replicated rivet lines
• LED lighting with bright landing light
• Articulated flaps for uncritical approaches
• NEW: Enlarged cockpit compartment now allows for 2 pcs 6S 3300mAh batteries for longer flight time
• NEW: Optimized canopy lock with more hold
• NEW: Improved connectors on the quick-release system for added security
• Assembly in 10-30 minutes
• NEW: New attractive and true-to-original paint scheme
• Includes richly illustrated assembly instructions in German and English

Scope of Delivery:

• Fully assembled and highly detailed model
• Motor: 2x Brushless inrunner 2860-KV1800
• Impeller: 70mm, 12-blade
• ESC: 2x 80A with 8A BEC
• Servos: 4x Digital 23g MG, 5x Digital 13g MG
• Reflex stabilization system (included in this set)

This set includes a Reflex system specially programmed for this aircraft. This electronic stabilization system was developed to assist the pilot with control commands without interfering.
The Reflex system works with both PPM and SBUS inputs and natively with all common remote control systems.
If the Reflex system is assigned to a 3-channel switch, 3 different modes can be selected:

• Stabilized Mode: When the control sticks are released, the model is automatically brought into a neutral flight position, which offers a lot of safety in tricky situations, especially for beginners and inexperienced pilots.
• Optimized Mode: The gyroscopic system of the Reflex system counteracts external influences such as gusts of wind or crosswinds and keeps the model precisely in a stable attitude.
• Off: The Reflex system can be completely switched off.

The Reflex system is specially set up for this flight model. No further programming is required, only the installation and connection in the model needs to be carried out.
The Reflex system can be connected to all receivers with at least 4 channels.

Required Accessories:

• Remote control: min. 6 channels
• Receiver: min. 6 channels
• Battery: 6S LiPo 5000mAh 45C
• LiPo charger