FMS Ranger V2 PNP, RED, Spw. 1220mm, Combo incl. Reflex V3 Gyro System

The red Ranger V2 from FMS is a trainer model with a 122cm wingspan. The model is constructed from ultralight EPO hard foam material and offers exceptional lift even at slow speeds due to its extremely low wing loading. Robust plastic struts give the wings additional strength during aerobatic maneuvers, and the high-strength tricycle landing gear makes handling on the ground a breeze.

Reliable Drive
Of course, a great aircraft also needs a great and, above all, reliable propulsion system. FMS has equipped the Ranger with a 1200KV outrunner motor on a Predator 20A ESC, which allows the Ranger to go vertical on 3S if needed.

Quick Assembly
Only 6 screws are required for the complete assembly of the model. The model is assembled faster than the battery can be charged.

Includes FMS Reflex V3 Stabilization System
This model comes with an FMS Reflex System specially programmed for this aircraft. This electronic stabilization system is designed to assist the pilot with control commands, but not to interfere. The Reflex system works with both PPM and SBUS inputs and works natively with all common remote control systems. If the Reflex system is assigned to a 3-channel switch, 3 different modes can be selected:

• Stabilized Mode: When the joysticks are released, the model is automatically brought into a neutral flight attitude, which offers a lot of safety for beginners and inexperienced pilots in tricky situations.
• Optimized Mode: The gyroscopic system of the Reflex system counteracts external influences such as gusts of wind or crosswinds and keeps the model precisely in a stable position.
• Off: The Reflex system can be completely switched off.

The FMS Reflex System is specifically tuned for this flight model. No further programming is required. The FMS Reflex System can be bound with all receivers with at least 4 channels.

Features:

• Reflex V3 stabilization system with gyro (compatible with all receivers with at least 4 channels) included
• Construction from robust EPO hard foam material
• Powerful brushless motor, high-performance ESC and 5 servos installed
• Includes metal landing gear
• Includes 2-blade propeller 10x5"
• Approx. 10-15 minutes flight time with 3S 1200mAh LiPo battery
• One-piece elevator for precise flight characteristics
• Pre-painted
• Model assembly in 3-10 minutes
• Includes richly illustrated assembly instructions (German and English)

Technical Data:

• Wingspan: 1220 mm
• Length: 947 mm
• Flying weight: approx. 1200 g
• Wing area: 25.4 dm²
• Wing loading: 39.4 g/dm²
• Motor: Brushless 3136-KV1200
• ESC: Brushless 20A
• Servos: 4x 9g

Required Accessories:

• Remote control: min. 4 channels
• Receiver: min. 4 channels
• Battery: 3S LiPo 1300mAh 25C
• LiPo charger